{"dcterms:modified":"2025-11-10","dcterms:creator":"A Dataverse Instance","@type":"ore:ResourceMap","@id":"https://data.fz-juelich.de/api/datasets/export?exporter=OAI_ORE&persistentId=doi:10.26165/JUELICH-DATA/FEKKSS","ore:describes":{"fzj:Institute":"IET-4","Title":"Operational Data of a 100 kW Proton Exchange Membrane (PEM) Electrolyzer: Collection 2018–2023","fzj:PoF IV topic":"Electrochemistry for Hydrogen (POF4-1231)","Author":[{"author:Name":"Keller, Roger","author:Affiliation":"FZJ / IET-4","Identifier Scheme":"ORCID","Identifier":"https://orcid.org/0000-0002-4246-0596"},{"author:Name":"Rauls, Edward","Identifier Scheme":"ORCID","Identifier":"https://orcid.org/0000-0002-4718-4885"},{"author:Name":"Hehemann, Michael","author:Affiliation":"FZJ / IET-4","Identifier Scheme":"ORCID","Identifier":"https://orcid.org/0000-0003-2483-1266"},{"author:Name":"Müller, Martin","author:Affiliation":"FZJ / IET-4","Identifier Scheme":"ORCID","Identifier":"https://orcid.org/0000-0002-7521-8237"}],"citation:Contact":{"datasetContact:Name":"Keller, Roger","datasetContact:Affiliation":"FZJ / IET-4","datasetContact:E-mail":"r.keller@fz-juelich.de"},"citation:Description":{"dsDescription:Text":"This data set contains detailed measurement and set point data from a 100 kW Proton Exchange Membrane (PEM) electrolyzer test rig developed at IET-4, covering the period 2018–2023 with approximately 200 individual data sets. The system was operated under a wide range of user-defined load profiles, e.g. wind power and photovoltaic (PV). All relevant operational data (~120 measurement values) were continuously recorded, including electrical characteristics (voltage and current), temperature distributions, gas flow rates, and efficiency metrics, as well as auxiliary parameters required for detailed system assessment. The data collection campaign was designed to support systematic investigations on electrochemical performance, thermal behavior, start-up and ramping dynamics, and system efficiency. It further enables research on advanced thermal control strategies [1], transient behavior during start-up phases [2], dynamic system modeling [3], data-driven operational optimization [4], and efficiency evaluation [5]. In addition, the dataset provides a robust foundation for material degradation studies, system design optimization, and the development of advanced control loops and operational strategies.\r\n\r\nMore detailed information on the 100 kW PEM electrolyzer test rig can be found in the referenced publications.\r\n\r\nInformation on the structure and organization of the data and the process flow diagram can be found in the  the folder \"Documentation\".","dsDescription:Date":"2025-10-08"},"Subject":"Engineering","Related Publication":[{"Citation":"[1] Roger Keller et al., An adaptive model-based feedforward temperature control of a 100 kW PEM electrolyzer, Control Engineering Practice (2022),","ID Type":"doi","ID Number":"10.1016/j.conengprac.2021.104992","URL":"https://doi.org/10.1016/j.conengprac.2021.104992"},{"Citation":"[2] Edward Rauls et al., Favorable Start-Up behavior of polymer electrolyte membrane water electrolyzers, Applied Energy (2023),","ID Type":"doi","ID Number":"10.1016/j.apenergy.2022.120350","URL":"https://doi.org/10.1016/j.apenergy.2022.120350"},{"Citation":"[3] Edward Rauls et al., System dynamics of polymer electrolyte membrane water electrolyzers and impact of renewable energy sources on systems design, International Journal of Hydrogen Energy (2024),","ID Type":"doi","ID Number":"10.1016/j.ijhydene.2024.03.302","URL":"https://doi.org/10.1016/j.ijhydene.2024.03.302"},{"Citation":"[4] Roger Keller et al., Experimental Demonstration of Dynamic Demand Response Scheduling for PEM-Electrolyzers, Applied Energy (2025),","ID Type":"doi","ID Number":"10.1016/j.apenergy.2025.126014","URL":"https://doi.org/10.1016/j.apenergy.2025.126014"},{"Citation":"[5] Edward Rauls, Dissertation, Dynamischer Betrieb von Polymer-Elektrolyt-Membran Wasserelektrolyseuren, RWTH Aachen (2025),","ID Type":"doi","ID Number":"10.18154/RWTH-2025-02739","URL":"https://doi.org/10.18154/RWTH-2025-02739"}],"Contributor":{"contributor:Type":"Data Manager","contributor:Name":"Keller, Roger"},"citation:Distribution Date":"2025-01-28","citation:Depositor":"Keller, Roger","Deposit Date":"2025-01-28","Time Period Covered":{"timePeriodCovered:Start":"2018-02-06","timePeriodCovered:End":"2023-11-29"},"citation:Date of Collection":{"dateOfCollection:Start":"2018-02-06","dateOfCollection:End":"2023-11-29"},"Kind of Data":"experimentel data","citation:Documentation and Access to Sources":"The data set is organized in a structured and consistent way. All data files start with “Data_measured”, while the corresponding set point files begin with “Setpoint-Profile”. Set points can either be defined manually or automatically using a predefined set point sequence stored in a file. For each set point file, there exists a corresponding measurement file — but not necessarily the other way around, since some experiments were operated manually without automated set point control. To get an overview of all available measurements, it is recommended to display the data set in \"tree structure\" view. This provides a quick overview of available measurement days and a short description of what was measured. If a folder contains only one file, the system was operated manually. If a folder contains two files, the experiment was performed automatically using a set point profile.","@id":"doi:10.26165/JUELICH-DATA/FEKKSS","@type":["ore:Aggregation","schema:Dataset"],"schema:version":"1.0","schema:datePublished":"2025-11-10","schema:name":"Operational Data of a 100 kW Proton Exchange Membrane (PEM) Electrolyzer: Collection 2018–2023","schema:dateModified":"2025-11-10 10:13:02.666","schema:license":"https://creativecommons.org/publicdomain/zero/1.0/","dvcore:fileTermsOfAccess":{"dvcore:fileRequestAccess":false},"schema:includedInDataCatalog":"Institute of Energy Technologies – Electrochemical Process Engineering (IET-4)","ore:aggregates":[{"schema:description":"This file gives an overview of the data","schema:name":"01_Data_Overview.pdf","dvcore:restricted":false,"dvcore:directoryLabel":"01_Documentation","schema:version":1,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=37315","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/37315","@type":"ore:AggregatedResource","schema:fileFormat":"application/pdf","dvcore:filesize":367521,"dvcore:storageIdentifier":"s3://juelich_data:199c8f8677c-36add0222e93","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"af7dc0822683830e2f40f8b8714276d191c6c54a1e6397678c89fd02492cc60f"}},{"schema:description":"Process flow diagram 100 kW electrolyzer","schema:name":"01_Process_flow_diagram_100kW-electrolyzer.pdf","dvcore:restricted":false,"dvcore:directoryLabel":"01_Documentation","schema:version":2,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=37791","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/37791","@type":"ore:AggregatedResource","schema:fileFormat":"application/pdf","dvcore:filesize":281028,"dvcore:storageIdentifier":"s3://juelich_data:199cc5139b4-b28fa8a38d34","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"92ba769330800e834ff76796a437fb6adfde36b9ed7e24ed983f04a48e7b31aa"}},{"schema:description":"This file contains a detailed overview on the structure and organization of the measured data and the used set point profiles.","schema:name":"01_Structure_Organization_Data.pdf","dvcore:restricted":false,"dvcore:directoryLabel":"01_Documentation","schema:version":4,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=37314","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/37314","@type":"ore:AggregatedResource","schema:fileFormat":"application/pdf","dvcore:filesize":663344,"dvcore:storageIdentifier":"s3://juelich_data:199c8d6d4d6-dc12026704b7","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"865d27d5035d4df9a8b7bbcb3328fe717b64d5934b1357cf9349c10d8f9eb8d0"}},{"schema:description":"The data corresponds to the startup phase of the 100 kW Proton Exchange Membrane (PEM) electrolyzer, during which the system’s control strategies were tested and initiated. All setpoints were configured manually, without the implementation of automated control sequences.","schema:name":"2018-02-06_Data_startup-phase_manual-mode.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2018-02-06_Startup-phase","schema:version":10,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=21902","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/21902","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":6506403,"dvcore:storageIdentifier":"s3://juelich_data:194ac45d125-9760e4d30e48","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"be8b8a15b6a5547ddff57d9987e052068cfcdf3119763d0c346e6cf396fc7075"}},{"schema:description":"The data corresponds to the startup phase of the 100 kW Proton Exchange Membrane (PEM) electrolyzer, during which the system’s control strategies were tested and initiated. All setpoints were configured manually, without the implementation of automated control sequences.","schema:name":"2018-02-07_Data_startup-phase_manual-mode.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2018-02-07_Startup-phase","schema:version":7,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22120","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22120","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":7761996,"dvcore:storageIdentifier":"s3://juelich_data:194ac45d263-5296c7494070","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"6ce25fdb22a00d05d9eeec19789e27f5be0f0c45002e1b10c9811034d2388e93"}},{"schema:description":"The data corresponds to the startup phase of the 100 kW Proton Exchange Membrane (PEM) electrolyzer, during which the system’s control strategies were tested and initiated. All setpoints were configured manually, without the implementation of automated control sequences.","schema:name":"2018-02-07_Data_startup-phase_manual-mode.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2018-02-07_Startup-phase","schema:version":8,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=21883","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/21883","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":2282485,"dvcore:storageIdentifier":"s3://juelich_data:194ac45d2f0-5b902f2edbc6","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"5c25592c7909bebeb4571ee0b122e6540c0d4d19b4d22a232bec05a2dfd2afd5"}},{"schema:description":"The data corresponds to the startup phase of the 100 kW Proton Exchange Membrane (PEM) electrolyzer, during which the system’s control strategies were tested and initiated. All setpoints were configured manually, without the implementation of automated control sequences.","schema:name":"2018-02-16_Data_startup-phase_manual-mode.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2018-02-16_Startup-phase","schema:version":6,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22125","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22125","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":6276586,"dvcore:storageIdentifier":"s3://juelich_data:194ac45d369-bf2547209973","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"4cc7bdab8534f3f530c0dfc5339f2f6b4eacf5693074e61e5caf326d4497e953"}},{"schema:description":"The data corresponds to the startup phase of the 100 kW Proton Exchange Membrane (PEM) electrolyzer, during which the system’s control strategies were tested and initiated. All setpoints were configured manually, without the implementation of automated control sequences.","schema:name":"2018-02-19_Data_startup-phase_manual-mode.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2018-02-19_Startup-phase","schema:version":5,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22023","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22023","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":12313814,"dvcore:storageIdentifier":"s3://juelich_data:194ac45d467-59795fe37d4c","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"551ae1f6fa13aca11b7ff5bc44d061d092d574f493883a96124299df83ac3f67"}},{"schema:description":"The data corresponds to the startup phase of the 100 kW Proton Exchange Membrane (PEM) electrolyzer, during which the system’s control strategies were tested and initiated. All setpoints were configured manually, without the implementation of automated control sequences. The current density was manually regulated up to 2 A/cm² during the testing period.","schema:name":"2018-02-20_Data_startup-phase_maunal-mode_high-current.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2018-02-20_Startup-phase_upto_2A-cm2","schema:version":5,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=21955","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/21955","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":10793025,"dvcore:storageIdentifier":"s3://juelich_data:194ac45d565-f8b2dfdc297c","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"d4b68d79c0d281223e0dfcfa84112ad85332552c9bcb3a56535feb4dc728e032"}},{"schema:description":"The data corresponds to the startup phase of the 100 kW Proton Exchange Membrane (PEM) electrolyzer, during which the system’s control strategies were tested and initiated. All setpoints were configured manually, without the implementation of automated control sequences. The current density was manually regulated up to 2 A/cm² during the testing period.","schema:name":"2018-02-21_Data_startup-phase_manual-mode_high-current.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2018-02-21_Startup-phase_upto_2A-cm2","schema:version":6,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=21954","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/21954","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":6653731,"dvcore:storageIdentifier":"s3://juelich_data:194ac45d61b-c154babaff58","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"04f5dac1f21c19f6ed011b5bb0e21f016a5f198b301f8014c5e3e8446547f5e7"}},{"schema:description":"The data corresponds to the startup phase of the 100 kW Proton Exchange Membrane (PEM) electrolyzer, during which the system’s control strategies were tested and initiated. All setpoints were configured manually, without the implementation of automated control sequences.","schema:name":"2018-02-22_Data_startup-phase_manual-mode.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2018-02-22_Startup-phase","schema:version":4,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22060","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22060","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":9768226,"dvcore:storageIdentifier":"s3://juelich_data:194ac45d6e6-82f13dc2a5e9","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"cb54a039cc216dc1080df8f599c75f6771d46d77b93702d30a0c82c85ea90a22"}},{"schema:description":"The data corresponds to the startup phase of the 100 kW Proton Exchange Membrane (PEM) electrolyzer, during which the system’s control strategies were tested and initiated. All setpoints were configured manually, without the implementation of automated control sequences. During this phase, the pressure control loop was activated and tested to ensure stable system operation under varying load conditions.","schema:name":"2018-02-23_Data_startup-phase_manual-mode_pressure-control-loop.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2018-02-23_Startup-phase_pressure-control-loop","schema:version":8,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=21937","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/21937","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":6874980,"dvcore:storageIdentifier":"s3://juelich_data:194ac45d78e-380b068fc10d","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"db583ad8bff327a82cb60e6a5a226815e5baaac8e15e79e7dea3608b96360299"}},{"schema:description":"The data corresponds to the startup phase of the 100 kW Proton Exchange Membrane (PEM) electrolyzer, during which the system’s control strategies were tested and initiated. All setpoints were configured manually, without the implementation of automated control sequences. During this phase, the pressure control loop was activated and tested to ensure stable system operation under varying load conditions.","schema:name":"2018-02-26_Data_startup-phase_manual-mode_pressure-control-loop.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2018-02-26_Startup-phase_pressure-control-loop","schema:version":5,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=21905","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/21905","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":2906962,"dvcore:storageIdentifier":"s3://juelich_data:194ac45d832-8815910763f9","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"2d4374f794a6c5fa062f4f9082b653636bca845d9a40ab996742f17b53d634fb"}},{"schema:description":"The data corresponds to the startup phase of the 100 kW Proton Exchange Membrane (PEM) electrolyzer, during which the system’s control strategies were tested and initiated. All setpoints were configured manually, without the implementation of automated control sequences. During this phase, the pressure control loop was activated and tested to ensure stable system operation under varying load conditions.","schema:name":"2018-02-27_Data_startup-phase_manual-mode_pressure-control-loop.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2018-02-27_Startup-phase_ pressure-control-loop","schema:version":5,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22017","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22017","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":3257963,"dvcore:storageIdentifier":"s3://juelich_data:194ac45d8a3-22dc79bd252a","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"a539e7736071db9711e60f16d93a457d96efc3afa89b5c4d27bf6c2a17e6b43a"}},{"schema:description":"The data corresponds to the startup phase of the 100 kW Proton Exchange Membrane (PEM) electrolyzer, during which the system’s control strategies were tested and initiated. All setpoints were configured manually, without the implementation of automated control sequences. During this phase, the pressure control loop was activated and tested to ensure stable system operation under varying load conditions.","schema:name":"2018-02-28_Data_startup-phase_manual-mode_pressure-control-loop.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2018-02-28_Startup-phase_ pressure-control-loop","schema:version":5,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=21887","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/21887","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":15580044,"dvcore:storageIdentifier":"s3://juelich_data:194ac45da5a-3f63851457df","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"8945870fb2f40c4693131683bacc908c70124f747451e3f0c0838c2881a71900"}},{"schema:description":"The data corresponds to the startup phase of the 100 kW Proton Exchange Membrane (PEM) electrolyzer, during which the system’s control strategies were tested and initiated. All setpoints were configured manually, without the implementation of automated control sequences. During this phase, the pressure control loop was activated and tested to ensure stable system operation under varying load conditions.","schema:name":"2018-03-06_Data_startup-phase_manual-mode_pressure-control-loop.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2018-03-06_Startup-phase_ pressure-control-loop","schema:version":6,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22092","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22092","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":12775257,"dvcore:storageIdentifier":"s3://juelich_data:194ac45dc39-7ddcfb8cca99","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"7695733ac6f51b664737c88cb78bdbb07865f704e074ca1038dd500338818bcc"}},{"schema:description":"The data corresponds to the startup phase of the 100 kW Proton Exchange Membrane (PEM) electrolyzer, during which the system’s control strategies were tested and initiated. All setpoints were configured manually, without the implementation of automated control sequences. Additionally, a heating-up temperature curve was recorded to monitor the thermal behavior of the system during initial operation. During this phase, operational parameters for the thermal behavior, e.g. heat capacity and heat transfer, were establish.","schema:name":"2018-03-07_Data_startup-phase_manual-mode_heating-up-curve .xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2018-03-07_Startup-phase_heating-up-curve","schema:version":4,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=21890","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/21890","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":7005189,"dvcore:storageIdentifier":"s3://juelich_data:194ac45dd6c-e13d41078742","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"4149f9b5b6c1cb470a5e894628f9d807735ecb04dceb0b7353650d1296089685"}},{"schema:description":"The data corresponds to the startup phase of the 100 kW Proton Exchange Membrane (PEM) electrolyzer, during which the system’s control strategies were tested and initiated. All setpoints were configured manually, without the implementation of automated control sequences. During this phase, the pressure control loop was activated and tested to ensure stable system operation under varying load conditions.","schema:name":"2018-03-07_Data_startup-phase_manual-mode_pressure-control-loop.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2018-03-07_Startup-phase_ pressure-control-loop","schema:version":5,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22133","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22133","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":4807672,"dvcore:storageIdentifier":"s3://juelich_data:194ac45de0a-268cb5cfe38e","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"8c65b970778d97c396675558e8788850022e1c3fa4dccc467f4d59b5cfd9521d"}},{"schema:description":"The data corresponds to the startup phase of the 100 kW Proton Exchange Membrane (PEM) electrolyzer, during which the system’s control strategies were tested and initiated. All setpoints were configured manually, without the implementation of automated control sequences. During this phase, the pressure control loop was activated and tested to ensure stable system operation under varying load conditions.","schema:name":"2018-03-08_Data_startup-phase_manual-mode_pressure-control-loop.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2018-03-08_Startup-phase_ pressure-control-loop","schema:version":5,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=21980","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/21980","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":14144590,"dvcore:storageIdentifier":"s3://juelich_data:194ac45df1e-973e321fe431","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"e41c8c06fd7a1172728f875ced244052b8b27f5a5abf2652775cf52799c4ee12"}},{"schema:description":"The data corresponds to the startup phase of the 100 kW Proton Exchange Membrane (PEM) electrolyzer, during which the system’s control strategies were tested and initiated. All setpoints were configured manually, without the implementation of automated control sequences. During this phase, the pressure control loop was activated and tested to ensure stable system operation under varying load conditions.","schema:name":"2018-03-14_Data_startup-phase_manual-mode_pressure-control-loop.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2018-03-14_Startup-phase_ pressure-control-loop","schema:version":5,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22013","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22013","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":16888037,"dvcore:storageIdentifier":"s3://juelich_data:194ac45e0ea-d087a5821f80","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"2c015054d89295ed9586d724d543ddcdf9542b9da2cc9bef36256ddbaaea1e23"}},{"schema:description":"The data corresponds to the startup phase of the 100 kW Proton Exchange Membrane (PEM) electrolyzer, during which the system’s control strategies were tested and initiated. All setpoints were configured manually, without the implementation of automated control sequences. During this phase, the pressure control loop was activated and tested to ensure stable system operation under varying load conditions.","schema:name":"2018-03-22_Data_startup-phase_manual-mode_pressure-control-loop.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2018-03-22_Startup-phase_ pressure-control-loop","schema:version":4,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22078","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22078","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":12606729,"dvcore:storageIdentifier":"s3://juelich_data:194ac45e278-f99d0b8fcc6e","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"66c7833accaaf1adf7fe0b3b6fb9f36c01b1326d25df350a0ec566bf7761967a"}},{"schema:description":"The data corresponds to the startup phase of the 100 kW Proton Exchange Membrane (PEM) electrolyzer, during which the system’s control strategies were tested and initiated. All setpoints were configured manually, without the implementation of automated control sequences. During this phase, the pressure control loop was activated and tested to ensure stable system operation under varying load conditions.","schema:name":"2018-03-28_Data_startup-phase_manual-mode_pressure-control-loop.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2018-03-28_Startup-phase_ pressure-control-loop","schema:version":4,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=21988","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/21988","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":7406234,"dvcore:storageIdentifier":"s3://juelich_data:194ac45e3bd-c0b7eb05c91f","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"aab74d3a510181d5ca004ba9a1a8784c22294ee537e5a39937c2887609261720"}},{"schema:description":"The data corresponds to the startup phase of the 100 kW Proton Exchange Membrane (PEM) electrolyzer, during which the system’s control strategies were tested and initiated. All setpoints were configured manually, without the implementation of automated control sequences. During this phase, a pressure curve due to emergency stop was recorded.","schema:name":"2018-04-16_Data_startup-phase_manual-mode_pressure-curve-emergency-stop.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2018-04-16_Startup-phase_ pressure-curve-emergency-stop","schema:version":5,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=21871","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/21871","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":8548128,"dvcore:storageIdentifier":"s3://juelich_data:194ac45e50a-699bcdd43c8d","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"a36e21e35d191ce932c0ad065e753f11149b4fc310f63160802cc341703035f9"}},{"schema:description":"The data corresponds to the startup phase of the 100 kW Proton Exchange Membrane (PEM) electrolyzer, during which the system’s control strategies were tested and initiated. All setpoints were configured manually, without the implementation of automated control sequences. Additionally, a heating-up temperature curve was recorded to monitor the thermal behavior of the system during initial operation. During this phase, operational parameters for the thermal behavior, e.g. heat capacity and heat transfer, were establish.","schema:name":"2018-04-20_Data_startup-phase_manual-mode_heating-up-curve.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2018-04-20_Startup-phase_heating-up-curve","schema:version":4,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=21961","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/21961","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":7779699,"dvcore:storageIdentifier":"s3://juelich_data:194ac45e5df-528b22a3e4c0","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"7c0b0335a1e6356c61d39a2287c4fda922cd154631509e568b0a9d97f41a6d0d"}},{"schema:description":"The data corresponds to the startup phase of the 100 kW Proton Exchange Membrane (PEM) electrolyzer, during which the system’s control strategies were tested and initiated. All setpoints were configured manually, without the implementation of automated control sequences. During this phase, the pressure control loop was activated and tested to ensure stable system operation under differential pressure conditions.","schema:name":"2018-05-22_Data_startup-phase_manual-mode_pressure-control-loop.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2018-05-22_Startup-phase_ pressure-control-loop_differential-pressure","schema:version":5,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22140","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22140","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":7577589,"dvcore:storageIdentifier":"s3://juelich_data:194ac45e692-c769f026e25c","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"9039e8d87124b84369aff212851b41be75822a4ef25485031dc6d95a6973743c"}},{"schema:description":"The data corresponds to the startup phase of the 100 kW Proton Exchange Membrane (PEM) electrolyzer, during which the system’s control strategies were tested and initiated. All setpoints were configured manually, without the implementation of automated control sequences. During this phase, the pressure control loop was activated and tested to ensure stable system operation under differential pressure conditions.","schema:name":"2018-05-23_Data_startup-phase_manual-mode_pressure-control-loop.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2018-05-23_Startup-phase_ pressure-control-loop_differential_pressure","schema:version":5,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22049","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22049","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":4706527,"dvcore:storageIdentifier":"s3://juelich_data:194ac45e70e-e89a450e327a","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"4cc20918fd47cd38db8cca40e42fa2ef93c0c4ce85f62715aee40ba194d0ede3"}},{"schema:description":"The data corresponds to the startup phase of the 100 kW Proton Exchange Membrane (PEM) electrolyzer, during which the system’s control strategies were tested and initiated. All setpoints were configured manually, without the implementation of automated control sequences. During this phase, the pressure control loop was activated and tested to ensure stable system operation under varying differential pressure conditions.","schema:name":"2018-06-04_Data_startup-phase_manual-mode_pressure-control-loop.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2018-06-04_Startup-phase_ pressure-control-loop_vary-pressure-setpoints","schema:version":5,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=21965","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/21965","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":4622230,"dvcore:storageIdentifier":"s3://juelich_data:194ac45e77d-1c97dc1d9dc1","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"9457a5589c2c6a2057e5b7a3db83651d5b982737b0559727b341b1fce07e5f41"}},{"schema:description":"The data corresponds to the startup phase of the 100 kW Proton Exchange Membrane (PEM) electrolyzer, during which the system’s control strategies were tested and initiated. All setpoints were configured manually, without the implementation of automated control sequences. During this phase, the pressure control loop was activated and tested to ensure stable system operation under varying differential pressure conditions.","schema:name":"2018-06-05_Data_startup-phase_manual-mode_pressure-control-loop.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2018-06-05_Startup-phase_ pressure-control-loop_vary-pressure-setpoints","schema:version":5,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=21998","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/21998","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":8367977,"dvcore:storageIdentifier":"s3://juelich_data:194ac45e86c-15461061528c","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"10a2ac059597145fbb31db1e223eb3497ca55f588f1250aa04c786908c257bbb"}},{"schema:description":"The data corresponds to the startup phase of the 100 kW Proton Exchange Membrane (PEM) electrolyzer, during which the system’s control strategies were tested and initiated. All setpoints were configured manually, without the implementation of automated control sequences. During this phase, the pressure control loop was activated and tested to ensure stable system operation under varying differential pressure conditions.","schema:name":"2018-06-06_Data_startup-phase_manual-mode_pressure-control-loop.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2018-06-06_Startup-phase_ pressure-control-loop_vary-pressure-setpoints","schema:version":4,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=21918","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/21918","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":13869885,"dvcore:storageIdentifier":"s3://juelich_data:194ac45e9fe-b3a588d33925","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"789685c9b531ca02a315841092247b29e8f2967903e6c17f563e2853d8745d0a"}},{"schema:description":"The data corresponds to the startup phase of the 100 kW Proton Exchange Membrane (PEM) electrolyzer, during which the system’s control strategies were tested and initiated. All setpoints were configured manually, without the implementation of automated control sequences. During this phase, the pressure control loop was activated and tested to ensure stable system operation under varying load conditions.","schema:name":"2018-06-11_Data_startup-phase_manual-mode_pressure-control-loop.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2018-06-11_Startup-phase_ pressure-control-loop_vary-current-density","schema:version":5,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=21944","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/21944","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":16239365,"dvcore:storageIdentifier":"s3://juelich_data:194ac45ebc0-5ff704b9b537","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"382536bf5c4196d80a15263ed612c5a583974a0782987c1bfea6ecd8a3fde393"}},{"schema:description":"The data corresponds to the startup phase of the 100 kW Proton Exchange Membrane (PEM) electrolyzer, during which the system’s control strategies were tested and initiated. All setpoints were configured manually, without the implementation of automated control sequences. During this phase, the pressure control loop was activated and tested to ensure stable system operation under varying load conditions. The set-point of the pressure was 18 bar on the cathode and 17 bar on the anode side.","schema:name":"2018-06-12_Data_startup-phase_manual-mode_pressure-control-loop.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2018-06-12_Startup-phase_ pressure-control-loop_vary-current-density","schema:version":6,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22158","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22158","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":11916888,"dvcore:storageIdentifier":"s3://juelich_data:194ac45ede5-e22c73d2775c","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"759a23badd7b90747be625f5e72f58e0d953e8437d26d21b291edf1d781e9b03"}},{"schema:description":"The data corresponds to the startup phase of the 100 kW Proton Exchange Membrane (PEM) electrolyzer, during which the system’s control strategies were tested and initiated. All setpoints were configured manually, without the implementation of automated control sequences. During this phase, the pressure control loop was activated and tested to ensure stable system operation under varying load conditions. The set-point of the pressure was 18 bar on the cathode and 17 bar on the anode side.","schema:name":"2018-06-13_Data_startup-phase_manual-mode_pressure-control-loop.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2018-06-13_Startup-phase_ pressure-control-loop_vary-current-density","schema:version":5,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22152","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22152","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":12549997,"dvcore:storageIdentifier":"s3://juelich_data:194ac45ef78-5425e20f3a3b","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"f77107ecf740ee50ab6c823339ba4afb8e10420613f59fb008b4d364f6b9adfa"}},{"schema:description":"The data corresponds to the startup phase of the 100 kW Proton Exchange Membrane (PEM) electrolyzer, during which the system’s control strategies were tested and initiated. All setpoints were configured manually, without the implementation of automated control sequences. During this phase, the pressure control loop was activated and tested to ensure stable system operation under varying differential pressure conditions.","schema:name":"2018-06-14_Data_startup-phase_manual-mode_pressure-control-loop.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2018-06-14_Startup-phase_ pressure-control-loop_differential-pressure","schema:version":4,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22087","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22087","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":5665254,"dvcore:storageIdentifier":"s3://juelich_data:194ac45f072-5cbc42b2cc0f","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"31d4a3aa3e85058bbc5a8a571923b51d7dfa241e486cec8ad0d4a421accde28b"}},{"schema:description":"The data corresponds to the startup phase of the 100 kW Proton Exchange Membrane (PEM) electrolyzer, during which the system’s control strategies were tested and initiated. All setpoints were configured manually, without the implementation of automated control sequences. During this phase, the pressure control loop was activated and tested to ensure stable system operation under varying differential pressure conditions.","schema:name":"2018-08-02_Data_startup-phase_manual-mode_pressure-control-loop.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2018-08-02_Startup-phase_ pressure-control-loop_differential-pressure","schema:version":4,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22086","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22086","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":1298675,"dvcore:storageIdentifier":"s3://juelich_data:194ac45f0df-fbabaf424700","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"5054f47a6fab825f1e459824509029927284cbe7c04688fa9013ce37045befd2"}},{"schema:description":"The data corresponds to the startup phase of the 100 kW Proton Exchange Membrane (PEM) electrolyzer, during which the system’s control strategies were tested and initiated. All setpoints were configured manually, without the implementation of automated control sequences. During this phase, the pressure control loop was activated and tested to ensure stable system operation under varying load conditions.","schema:name":"2018-08-15_Data_startup-phase_manual-mode_pressure-control-loop.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2018-08-15_Startup-phase_ pressure-control-loop_vary-current-density","schema:version":5,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=21950","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/21950","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":14036962,"dvcore:storageIdentifier":"s3://juelich_data:194ac45f264-c16d48d9c064","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"1558466f29131b96ea1bfa29837cada0c5de1a03e485f8c39e9b4d030b2d9e7d"}},{"schema:description":"The data corresponds to the startup phase of the 100 kW Proton Exchange Membrane (PEM) electrolyzer, during which the system’s control strategies were tested and initiated. All setpoints were configured manually, without the implementation of automated control sequences. During this phase, the pressure control loop was activated and tested to ensure stable system operation under varying load conditions and pressure set-points.","schema:name":"2018-08-28_Data_startup-phase_manual-mode_pressure-control-loop.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2018-08-28_Startup-phase_ pressure-control-loop_vary-current-density","schema:version":5,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=21879","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/21879","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":10212875,"dvcore:storageIdentifier":"s3://juelich_data:194ac45f3e1-bfb1374dc0a5","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"853ac58a0afe1b8fdc33332f0a3244949ce8684f52bea3afc11b462198bdfa1d"}},{"schema:description":"The data corresponds to the startup phase of the 100 kW Proton Exchange Membrane (PEM) electrolyzer, during which the system’s control strategies were tested and initiated. All setpoints were configured manually, without the implementation of automated control sequences. During this phase, the temperature control loop was activated and tested to ensure thermal stable system operation under varying load conditions.","schema:name":"2018-08-30_Data_startup-phase_manual-mode_temperature-control-loop.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2018-08-30_Startup-phase_ temperature-control-loop","schema:version":5,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22076","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22076","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":16281253,"dvcore:storageIdentifier":"s3://juelich_data:194ac45f5ca-ee0194e252f4","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"8dce8b20213c5d0bd3dfc53dea55c5e8cc166377392073b8fd0311a8a134b68b"}},{"schema:description":"The data corresponds to the startup phase of the 100 kW Proton Exchange Membrane (PEM) electrolyzer, during which the system’s control strategies were tested and initiated. All setpoints were configured manually, without the implementation of automated control sequences. During this phase, the temperature control loop was activated and tested to ensure thermal stable system operation under varying load conditions.","schema:name":"2018-09-24_Data_startup-phase_manual-mode_temperature-control-loop.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2018-09-24_Startup-phase_ temperature-control-loop","schema:version":5,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=21966","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/21966","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":12701271,"dvcore:storageIdentifier":"s3://juelich_data:194ac45fab7-2caf9b0bc5ec","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"003c28195e0370d42a9607b4da579e13715711429fc6cd8513e2ac23ff7974a3"}},{"schema:description":"The data corresponds to the startup phase of the 100 kW Proton Exchange Membrane (PEM) electrolyzer, during which the system’s control strategies were tested and initiated. All setpoints were configured manually, without the implementation of automated control sequences. During this phase, the temperature control loop was activated and tested to ensure thermal stable system operation under varying load conditions.","schema:name":"2018-10-01_Data_startup-phase_manual-mode_temperature-control-loop.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2018-10-01_Startup-phase_ temperature-control-loop","schema:version":4,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22111","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22111","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":10632685,"dvcore:storageIdentifier":"s3://juelich_data:194ac45fbc8-e8bc442e6175","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"3b967cae5c3771f12123d5f4710d5e7f93c80d54f68ecd8f4993f33c6d7852a5"}},{"schema:description":"The data corresponds to the startup phase of the 100 kW Proton Exchange Membrane (PEM) electrolyzer, during which the system’s control strategies were tested and initiated. All setpoints were configured manually, without the implementation of automated control sequences. During this phase, the temperature control loop was activated and tested to ensure thermal stable system operation under varying load conditions.","schema:name":"2018-10-02_Data_startup-phase_manual-mode_temperature-control-loop.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2018-10-02_Startup-phase_ temperature-control-loop","schema:version":3,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22047","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22047","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":14808111,"dvcore:storageIdentifier":"s3://juelich_data:194ac45fd42-a91f3b7d24ed","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"50423403761725d9f70f06387f8f93427bfd404de1ae3dd107af01cf37dbad8f"}},{"schema:description":"The data corresponds to the startup phase of the 100 kW Proton Exchange Membrane (PEM) electrolyzer, during which the system’s control strategies were tested and initiated. All setpoints were configured manually, without the implementation of automated control sequences. During this phase, the temperature control loop was activated and tested to ensure thermal stable system operation under varying load conditions.","schema:name":"2018-10-08_Data_startup-phase_manual-mode_temperature-control-loop.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2018-10-08_Startup-phase_ temperature-control-loop","schema:version":3,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22045","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22045","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":15859781,"dvcore:storageIdentifier":"s3://juelich_data:194ac45feda-85adb79106e1","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"6ac84968d6f7a57afeb981135d5659cdb30930aee1a48c55903049f04d1d5193"}},{"schema:description":"The data corresponds to the startup phase of the 100 kW Proton Exchange Membrane (PEM) electrolyzer, during which the system’s control strategies were tested and initiated. All setpoints were configured manually, without the implementation of automated control sequences. During this phase, the temperature control loop was activated and tested to ensure thermal stable system operation under varying load conditions.","schema:name":"2018-12-07_Data_startup-phase_manual-mode_temperature-control-loop.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2018-12-07_Startup-phase_ temperature-control-loop","schema:version":3,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22090","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22090","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":11350898,"dvcore:storageIdentifier":"s3://juelich_data:194ac46006b-1d5b51637e6d","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"101abf65d06cecbf59536f28145e76a272679c550c96f752e9586aef8f22dd9d"}},{"schema:description":"The data corresponds to the startup phase of the 100 kW Proton Exchange Membrane (PEM) electrolyzer, during which the system’s control strategies were tested and initiated. All setpoints were configured manually, without the implementation of automated control sequences. During this phase, the temperature control loop was activated and tested to ensure thermal stable system operation under varying load conditions.","schema:name":"2019-02-14_Data_startup-phase_manual-mode_temperature-control-loop.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2019-02-14_Startup-phase_ temperature-control-loop","schema:version":3,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22150","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22150","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":4302208,"dvcore:storageIdentifier":"s3://juelich_data:194ac46014e-e51c27775cd3","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"dfd5f3a328da2913d0d53659f29915cd92ce1d92c964ec89607e0437d5032a4e"}},{"schema:description":"The data corresponds to the startup phase of the 100 kW Proton Exchange Membrane (PEM) electrolyzer, during which the system’s control strategies were tested and initiated. All setpoints were configured manually, without the implementation of automated control sequences. During this phase, the temperature control loop was activated and tested to ensure thermal stable system operation under varying load conditions and different control parameters.","schema:name":"2019-02-18_1st_Data_startup-phase_manual-mode_temperature-control-loop.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2019-02-18_1st_Startup-phase_ temperature-control-loop","schema:version":5,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22070","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22070","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":8361801,"dvcore:storageIdentifier":"s3://juelich_data:194ac46028e-b2b9379569d6","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"9de536dfcb09bf8ebe2fd7453b486ac78cb316ab207f72f57472ea11cc9848d8"}},{"schema:description":"The data corresponds to the startup phase of the 100 kW Proton Exchange Membrane (PEM) electrolyzer, during which the system’s control strategies were tested and initiated. All setpoints were configured manually, without the implementation of automated control sequences. During this phase, the temperature control loop was activated and tested to ensure thermal stable system operation under varying load conditions and different control parameters.","schema:name":"2019-02-18_2nd_Data_startup-phase_manual-mode_temperature-control-loop.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2019-02-18_2nd_Startup-phase_ temperature-control-loop","schema:version":5,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22099","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22099","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":2865232,"dvcore:storageIdentifier":"s3://juelich_data:194ac460300-7e855513b129","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"757a10ed068457e58398b9e316122c575ac7985558df4fc4b5eccfadebdb2742"}},{"schema:description":"The data corresponds to the startup phase of the 100 kW Proton Exchange Membrane (PEM) electrolyzer, during which the system’s control strategies were tested and initiated. All setpoints were configured manually, without the implementation of automated control sequences. During this phase, the temperature control loop was activated and tested to ensure thermal stable system operation under varying load conditions and different control parameters.","schema:name":"2019-02-19_1st_Data_startup-phase_manual-mode_temperature-control-loop.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2019-02-19_1st_Startup-phase_ temperature-control-loop","schema:version":4,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=21898","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/21898","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":14799381,"dvcore:storageIdentifier":"s3://juelich_data:194ac460411-4b67f32d7526","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"f596eae3241c56972fdf83080c6f2743b1915f59e865bf372ab8dc7377ffec6c"}},{"schema:description":"The data corresponds to the startup phase of the 100 kW Proton Exchange Membrane (PEM) electrolyzer, during which the system’s control strategies were tested and initiated. All setpoints were configured manually, without the implementation of automated control sequences. During this phase, the temperature control loop was activated and tested to ensure thermal stable system operation under varying load conditions and different control parameters.","schema:name":"2019-02-19_2nd_Data_startup-phase_manual-mode_temperature-control-loop.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2019-02-19_2nd_Startup-phase_ temperature-control-loop","schema:version":3,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=21969","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/21969","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":2198329,"dvcore:storageIdentifier":"s3://juelich_data:194ac46049d-fad105d3a3e8","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"e1dc8a02bdabac15d35aacd60e6944e9794e8ef1206e8355ae7d4ee7fde94600"}},{"schema:description":"The data corresponds to the startup phase of the 100 kW Proton Exchange Membrane (PEM) electrolyzer, during which the system’s control strategies were tested and initiated. All setpoints were configured manually, without the implementation of automated control sequences. During this phase, the temperature control loop was activated and tested to ensure thermal stable system operation under varying load conditions and different control parameters.","schema:name":"2019-02-20_Data_startup-phase_manual-mode_temperature-control-loop.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2019-02-20_Startup-phase_ temperature-control-loop","schema:version":3,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=21909","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/21909","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":15653367,"dvcore:storageIdentifier":"s3://juelich_data:194ac4605d0-abb1787af375","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"fe87acb789ed0c735a5199b4efef1f77ab1339f1f4b2377faf570a2fe4558a69"}},{"schema:description":"The data corresponds to the startup phase of the 100 kW Proton Exchange Membrane (PEM) electrolyzer, during which the system’s control strategies were tested and initiated. All setpoints were configured manually, without the implementation of automated control sequences. During this phase, the temperature control loop was activated and tested to ensure thermal stable system operation under varying load conditions and different control parameters.","schema:name":"2019-02-21_Data_startup-phase_manual-mode_temperature-control-loop.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2019-02-21_Startup-phase_ temperature-control-loop","schema:version":3,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22153","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22153","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":18192741,"dvcore:storageIdentifier":"s3://juelich_data:194ac460800-7974d64f3810","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"5dd8d899dff7240ae817d307c681ebf208dc4d40c4cc2de355f63443a6f459c4"}},{"schema:description":"The data corresponds to the startup phase of the 100 kW Proton Exchange Membrane (PEM) electrolyzer, during which the system’s control strategies were tested and initiated. All setpoints were configured manually, without the implementation of automated control sequences. During this phase, the temperature control loop was activated and tested to ensure thermal stable system operation under varying load conditions and different control parameters.","schema:name":"2019-02-22_Data_startup-phase_manual-mode_temperature-control-loop.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2019-02-22_Startup-phase_ temperature-control-loop","schema:version":3,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=21981","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/21981","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":7194247,"dvcore:storageIdentifier":"s3://juelich_data:194ac460a7c-5da51ac8a3cb","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"d4570c5bead138af4d62b4308b7a68839ff2032f69ed18d080d889f88b50a36d"}},{"schema:description":"The data corresponds to the startup phase of the 100 kW Proton Exchange Membrane (PEM) electrolyzer, during which the system’s control strategies were tested and initiated. All setpoints were configured manually, without the implementation of automated control sequences. During this phase, the temperature control loop was activated and tested to ensure thermal stable system operation under varying load conditions and different control parameters","schema:name":"2019-02-25_Data_startup-phase_manual-mode_temperature-control-loop.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2019-02-25_Startup-phase_ temperature-control-loop","schema:version":3,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22014","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22014","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":14978553,"dvcore:storageIdentifier":"s3://juelich_data:194ac460c1a-c0b619b1c174","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"7cbdfd9480024245e521e4a63791db46d48c4f84b3344a5f70ba3b78bd47641a"}},{"schema:description":"The data corresponds to the startup phase of the 100 kW Proton Exchange Membrane (PEM) electrolyzer, during which the system’s control strategies were tested and initiated. All setpoints were configured manually, without the implementation of automated control sequences. During this phase, the temperature control loop was activated and tested to ensure thermal stable system operation under varying load conditions and different control parameters.","schema:name":"2019-03-06_Data_startup-phase_manual-mode_temperature-control-loop.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2019-03-06_Startup-phase_ temperature-control-loop","schema:version":3,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=21945","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/21945","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":12335210,"dvcore:storageIdentifier":"s3://juelich_data:194ac460dc9-69c5d21e2562","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"5ab59a61c25e5ccf51f649e413bab136b614182bfa468dd142208dde556461e0"}},{"schema:description":"The data corresponds to the startup phase of the 100 kW Proton Exchange Membrane (PEM) electrolyzer, during which the system’s control strategies were tested and initiated. All setpoints were configured manually, without the implementation of automated control sequences. During this phase, the temperature control loop was activated and tested to ensure thermal stable system operation under varying load conditions and different control parameters.","schema:name":"2019-03-08_Data_startup-phase_manual-mode_temperature-control-loop.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2019-03-08_Startup-phase_ temperature-control-loop","schema:version":3,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22024","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22024","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":10289207,"dvcore:storageIdentifier":"s3://juelich_data:194ac460f4b-c6aef1c48174","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"a70280443ea12c95c91d3922a49c7a3339bb56699536cd115e16159000af3c73"}},{"schema:description":"The data corresponds to the startup phase of the 100 kW Proton Exchange Membrane (PEM) electrolyzer, during which the system’s control strategies were tested and initiated. All setpoints were configured manually, without the implementation of automated control sequences. During this phase, the temperature control loop was activated and tested to ensure thermal stable system operation under varying load conditions and different control parameters.","schema:name":"2019-03-11_Data_startup-phase_manual-mode_temperature-control-loop.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2019-03-11_Startup-phase_ temperature-control-loop","schema:version":3,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=21915","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/21915","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":15635447,"dvcore:storageIdentifier":"s3://juelich_data:194ac461101-953b0bb2531e","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"ab92bf83f5e4c8fb76c00d5a51f45e7d65e9f2708d4a69a742ea3244362ec4aa"}},{"schema:description":"The data corresponds to the startup phase of the 100 kW Proton Exchange Membrane (PEM) electrolyzer, during which the system’s control strategies were tested and initiated. All setpoints were configured manually, without the implementation of automated control sequences. Additionally, a heating-up temperature curve was recorded to monitor the thermal behavior of the system during initial operation. ","schema:name":"2019-03-12_Data_startup-phase_manual-mode_heating-up-curve.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2019-03-12_Startup-phase_heating-up-curve","schema:version":3,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22042","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22042","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":7883464,"dvcore:storageIdentifier":"s3://juelich_data:194ac4611ee-abeedd345a25","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"e2db7b8fae556baa0736cafd6cd2825a5b8f506e23e3ce2c5108ab6b66fd458f"}},{"schema:description":"The data corresponds to the startup phase of the 100 kW Proton Exchange Membrane (PEM) electrolyzer, during which the system’s control strategies were tested and initiated. All setpoints were configured manually, without the implementation of automated control sequences. Additionally, a heating-up temperature curve was recorded to monitor the thermal behavior of the system during initial operation. Varying the load and pressures conditions.","schema:name":"2019-03-15_Data_startup-phase_manual-mode_heating-up-curve.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2019-03-15_Startup-phase_heating-up-curve","schema:version":3,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22051","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22051","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":13230093,"dvcore:storageIdentifier":"s3://juelich_data:194ac461310-b2dbc18ad57a","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"2c913479a1d0e7b34fb39a8c787ddb6555fffaa320abd4e52fd4132c8543da59"}},{"schema:description":"The data corresponds to the startup phase of the 100 kW Proton Exchange Membrane (PEM) electrolyzer, during which the system’s control strategies were tested and initiated. All setpoints were configured manually, without the implementation of automated control sequences. During this phase, the temperature control loop was activated and tested to ensure thermal stable system operation under varying load conditions and different control parameters.","schema:name":"2019-05-08_Data_startup-phase_manual-mode_temperature-control-loop.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2019-05-08_Startup-phase_ temperature-control-loop","schema:version":3,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=21948","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/21948","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":8241194,"dvcore:storageIdentifier":"s3://juelich_data:194ac4613f6-b4650192b550","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"68b810d9465c8d0b8457ae7bb22bd4f6e382e3ed2a4bea21cad955bac36de5c1"}},{"schema:description":"The data corresponds to the startup phase of the 100 kW Proton Exchange Membrane (PEM) electrolyzer, during which the system’s control strategies were tested and initiated. All setpoints were configured manually, without the implementation of automated control sequences. During this phase, the temperature control loop was activated and tested to ensure thermal stable system operation under varying load and pressure conditions for different control parameters.","schema:name":"2019-05-27_Data_startup-phase_manual-mode_temperature-control-loop.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2019-05-27_Startup-phase_temperature-control-loop","schema:version":3,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22001","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22001","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":1551897,"dvcore:storageIdentifier":"s3://juelich_data:194ac461460-d6dedde47114","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"a921a4a2dcb03bbccc48a5fbdc343eb8d6e44dc114be1e45a4c82f791cc0868c"}},{"schema:description":"The data corresponds to the startup phase of the 100 kW Proton Exchange Membrane (PEM) electrolyzer, during which the system’s control strategies were tested and initiated. All setpoints were configured manually, without the implementation of automated control sequences.During this phase, the temperature control loop was activated and tested to ensure thermal stable system operation under varying load and pressure conditions for different control parameters.","schema:name":"2019-05-29_Data_startup-phase_manual-mode_temperature-control-loop.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2019-05-29_Startup-phase_temperature-control-loop","schema:version":3,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22069","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22069","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":2201606,"dvcore:storageIdentifier":"s3://juelich_data:194ac461499-2683e525ad7e","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"8806ddba1137b6de0b58bd1a58de38f01742bac8a9163bff6c5efac24b4f68e4"}},{"schema:description":"The data corresponds to the startup phase of the 100 kW Proton Exchange Membrane (PEM) electrolyzer, during which the system’s control strategies were tested and initiated. All setpoints were configured manually, without the implementation of automated control sequences. During this phase, the temperature control loop was activated and tested to ensure thermal stable system operation under varying load and pressure conditions for different control parameters","schema:name":"2019-06-07_Data_startup-phase_manual-mode_temperature-control-loop.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2019-06-07_Startup-phase_temperature-control-loop","schema:version":3,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22003","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22003","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":5164448,"dvcore:storageIdentifier":"s3://juelich_data:194ac461508-474f18d2c7fd","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"b76357f52e1ea8bf727cdeeae7c42c575275045fac649e7dbef56d28473ba94c"}},{"schema:description":"The data corresponds to the startup phase of the 100 kW Proton Exchange Membrane (PEM) electrolyzer, during which the system’s control strategies were tested and initiated. All setpoints were configured manually, without the implementation of automated control sequences.During this phase, the temperature control loop was activated and tested to ensure thermal stable system operation under varying load and pressure conditions for different control parameters.","schema:name":"2019-06-11_1st_Data_startup-phase_manual-mode_temperature-control-loop.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2019-06-11_1st_Startup-phase_temperature-control-loop","schema:version":3,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22130","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22130","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":4201212,"dvcore:storageIdentifier":"s3://juelich_data:194ac46158e-aef4b8296184","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"9417d213e40a1f8b9a5f9b44e2a9c024b0ab5f6c200c1110b64437b784142540"}},{"schema:description":"The data corresponds to the startup phase of the 100 kW Proton Exchange Membrane (PEM) electrolyzer, during which the system’s control strategies were tested and initiated. All setpoints were configured manually, without the implementation of automated control sequences. During this phase, the temperature control loop was activated and tested to ensure thermal stable system operation under varying load and pressure conditions for different control parameters.","schema:name":"2019-06-11_2nd_Data_startup-phase_manual-mode_temperature-control-loop.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2019-06-11_2nd_Startup-phase_temperature-control-loop","schema:version":3,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22109","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22109","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":4426515,"dvcore:storageIdentifier":"s3://juelich_data:194ac4615ee-e6ed8595dce9","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"4f1cfcc0c0965a35e0485d90048069ef555bedd39e51f3024b8af10df6ae5b3c"}},{"schema:description":"The data corresponds to the startup phase of the 100 kW Proton Exchange Membrane (PEM) electrolyzer, during which the system’s control strategies were tested and initiated. All setpoints were configured manually, without the implementation of automated control sequences. During this phase, the temperature control loop was activated and tested to ensure thermal stable system operation under varying load and pressure conditions for different control parameters.","schema:name":"2019-06-12_Data_startup-phase_manual-mode_temperature-control-loop.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2019-06-12_Startup-phase_temperature-control-loop","schema:version":3,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=21913","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/21913","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":4115091,"dvcore:storageIdentifier":"s3://juelich_data:194ac46164d-fbac13280b56","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"9368e9afd8a8479ab0552046e78928b3c0c92f7950cdfc0149ab5c6f15141f77"}},{"schema:description":"The data corresponds to the startup phase of the 100 kW Proton Exchange Membrane (PEM) electrolyzer, during which the system’s control strategies were tested and initiated. All setpoints were configured manually, without the implementation of automated control sequences. During this phase, the temperature control loop was activated and tested to ensure thermal stable system operation under varying load and pressure conditions for different control parameters and set-points in temperature.","schema:name":"2019-06-13_Data_startup-phase_manual-mode_temperature-control-loop.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2019-06-13_Startup-phase_temperature-control-loop","schema:version":3,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=21967","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/21967","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":9345306,"dvcore:storageIdentifier":"s3://juelich_data:194ac4616f5-7f1c7f731668","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"8d14caa4b082e24006101db7fd49db40d2a67bb6523c4c10de0236d03f1c48ac"}},{"schema:description":"The data corresponds to the startup phase of the 100 kW Proton Exchange Membrane (PEM) electrolyzer, during which the system’s control strategies were tested and initiated. All setpoints were configured manually, without the implementation of automated control sequences. During this phase, the temperature control loop was activated and tested to ensure thermal stable system operation under varying load and pressure conditions for different control parameters.","schema:name":"2019-06-19_Data_startup-phase_manual-mode_temperature-control-loop.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2019-06-19_Startup-phase_temperature-control-loop","schema:version":3,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=21986","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/21986","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":19867369,"dvcore:storageIdentifier":"s3://juelich_data:194ac461948-1793faf88e14","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"9821bf23078970f0abea0a5dea1c48edd092ecd87c7eae1ef38d148a56250637"}},{"schema:description":"The data corresponds to the startup phase of the 100 kW Proton Exchange Membrane (PEM) electrolyzer, during which the system’s control strategies were tested and initiated. All setpoints were configured manually, without the implementation of automated control sequences. During this phase, the temperature control loop was activated and tested to ensure thermal stable system operation under varying load and pressure conditions for different control parameters.","schema:name":"2019-07-22_Data_startup-phase_manual-mode_temperature-control-loop.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2019-07-22_Startup-phase_temperature-control-loop","schema:version":3,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22040","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22040","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":3301732,"dvcore:storageIdentifier":"s3://juelich_data:194ac461a7d-a9695ab4b7c0","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"558872e3bc1f8bffc2ccfab40f968e955de0cf1c381ade53ccdac491856d7a75"}},{"schema:description":"The data corresponds to the startup phase of the 100 kW Proton Exchange Membrane (PEM) electrolyzer, during which the system’s control strategies were tested and initiated. All setpoints were configured manually, without the implementation of automated control sequences. During this phase, the temperature control loop was activated and tested to ensure thermal stable system operation under varying load and pressure conditions for different control parameters.","schema:name":"2019-07-23_Data_startup-phase_manual-mode_temperature-control-loop.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2019-07-23_Startup-phase_temperature-control-loop","schema:version":3,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22052","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22052","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":3953134,"dvcore:storageIdentifier":"s3://juelich_data:194ac461b14-59902229a54e","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"809d75b93a73d25df247cab2aea781cb0c6fe7672b245c1d857d6117dce43b59"}},{"schema:description":"The data corresponds to the startup phase of the 100 kW Proton Exchange Membrane (PEM) electrolyzer, during which the system’s control strategies were tested and initiated. All setpoints were configured manually, without the implementation of automated control sequences. During this phase, the temperature control loop was activated and tested to ensure thermal stable system operation under varying load and pressure conditions for different control parameters and set-points in temperature.","schema:name":"2019-07-24_Data_startup-phase_manual-mode_temperature-control-loop.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2019-07-24_Startup-phase_temperature-control-loop","schema:version":3,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=21974","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/21974","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":12382581,"dvcore:storageIdentifier":"s3://juelich_data:194ac461c67-70e96dfacc9b","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"baae276436b1ae26f4d17f7d901fd042ecffd290e2e4afbf8d3b86a6af579b0b"}},{"schema:description":"The data corresponds to the startup phase of the 100 kW Proton Exchange Membrane (PEM) electrolyzer, during which the system’s control strategies were tested and initiated. All setpoints were configured manually, without the implementation of automated control sequences. During this phase, the temperature control loop was activated and tested to ensure thermal stable system operation under varying load and pressure conditions for different control parameters.","schema:name":"2019-07-25_1st_Data_startup-phase_manual-mode_temperature-control-loop.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2019-07-25_1st_Startup-phase_temperature-control-loop","schema:version":3,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=21990","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/21990","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":1834777,"dvcore:storageIdentifier":"s3://juelich_data:194ac461d24-facf547652c9","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"8603277e357b018d5d308c0cd73d2087f9903b7687ed654c3c2e8d765db15bff"}},{"schema:description":"The data corresponds to the startup phase of the 100 kW Proton Exchange Membrane (PEM) electrolyzer, during which the system’s control strategies were tested and initiated. All setpoints were configured manually, without the implementation of automated control sequences. During this phase, the temperature control loop was activated and tested to ensure thermal stable system operation under varying load and pressure conditions for different control parameters.","schema:name":"2019-07-25_2nd_Data_startup-phase_manual-mode_temperature-control-loop.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2019-07-25_2nd_Startup-phase_temperature-control-loop","schema:version":3,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=21989","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/21989","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":11371454,"dvcore:storageIdentifier":"s3://juelich_data:194ac461e56-73c8733b1ba0","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"0f36eb477fa422e99b697580ebf38545a58a8af37fc239bd6c6a3433db4c267f"}},{"schema:description":"The data corresponds to the startup phase of the 100 kW Proton Exchange Membrane (PEM) electrolyzer, during which the system’s control strategies were tested and initiated. All setpoints were configured manually, without the implementation of automated control sequences. During this phase, the temperature control loop was activated and tested to ensure thermal stable system operation under varying load and pressure conditions for different control parameters.","schema:name":"2019-07-26_Data_startup-phase_manual-mode_temperature-control-loop.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2019-07-26_Startup-phase_temperature-control-loop","schema:version":3,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22055","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22055","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":5911542,"dvcore:storageIdentifier":"s3://juelich_data:194ac461f50-79c6be16a461","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"67668a6179db01366aa3a6e9929aa48979e04586d00dd49f04a3c6a90760051b"}},{"schema:description":"The data corresponds to the startup phase of the 100 kW Proton Exchange Membrane (PEM) electrolyzer, during which the system’s control strategies were tested and initiated. All setpoints were configured manually, without the implementation of automated control sequences. During this phase, the temperature control loop was activated and tested to ensure thermal stable system operation under varying load and pressure conditions for different control parameters and set-points in temperature.","schema:name":"2019-07-29_Data_startup-phase_manual-mode_temperature-control-loop.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2019-07-29_Startup-phase_temperature-control-loop","schema:version":3,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22110","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22110","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":9654722,"dvcore:storageIdentifier":"s3://juelich_data:194ac46205b-cd8d9202a194","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"570fb0994bdcb1f8a15b286395d07220c20f4ff1e2f85fb1b473d75b19a5e218"}},{"schema:description":"The data corresponds to the startup phase of the 100 kW Proton Exchange Membrane (PEM) electrolyzer, during which the system’s control strategies were tested and initiated. All setpoints were configured manually, without the implementation of automated control sequences. During this phase, the temperature control loop was activated and tested to ensure thermal stable system operation under varying load and pressure conditions for different control parameters.","schema:name":"2019-08-02_Data_startup-phase_manual-mode_temperature-control-loop.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2019-08-02_Startup-phase_temperature-control-loop","schema:version":3,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22091","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22091","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":3949755,"dvcore:storageIdentifier":"s3://juelich_data:194ac46211f-8793eff8abae","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"b3a99907f3513d54d59c29018ce60a75814ee0bef53082755951ba0b80aa4122"}},{"schema:description":"The data corresponds to the startup phase of the 100 kW Proton Exchange Membrane (PEM) electrolyzer, during which the system’s control strategies were tested and initiated. All setpoints were configured manually, without the implementation of automated control sequences. During this phase, the temperature control loop was activated and tested to ensure thermal stable system operation under varying load and pressure conditions for different control parameters and set-points in temperature.","schema:name":"2019-08-05_1st_Data_startup-phase_manual-mode_temperature-control-loop.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2019-08-05_1st_Startup-phase_temperature-control-loop","schema:version":3,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22009","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22009","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":3197563,"dvcore:storageIdentifier":"s3://juelich_data:194ac46216f-bc2bb89171f3","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"1cecced90024abf1c031701c6604c931a4df5ebdfc3932a99355d37a0c516f4b"}},{"schema:description":"The data corresponds to the startup phase of the 100 kW Proton Exchange Membrane (PEM) electrolyzer, during which the system’s control strategies were tested and initiated. All setpoints were configured manually, without the implementation of automated control sequences. During this phase, the temperature control loop was activated and tested to ensure thermal stable system operation under varying load and pressure conditions for different control parameters.","schema:name":"2019-08-05_2nd_Data_startup-phase_manual-mode_temperature-control-loop.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2019-08-05_2nd_Startup-phase_temperature-control-loop","schema:version":4,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=21995","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/21995","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":4738851,"dvcore:storageIdentifier":"s3://juelich_data:194ac462201-9e22f1a112a3","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"ad74790be436dc1f21ae6efe0409e74fa41343fb4947e3663407c5428e103ae9"}},{"schema:description":"The data corresponds to the startup phase of the 100 kW Proton Exchange Membrane (PEM) electrolyzer, during which the system’s control strategies were tested and initiated. All setpoints were configured manually, without the implementation of automated control sequences. During this phase, the temperature control loop was activated and tested to ensure thermal stable system operation under varying load and pressure conditions for different control parameters.","schema:name":"2019-08-30_Data_startup-phase_manual-mode_temperature-control-loop.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2019-08-30_Startup-phase_temperature-control-loop","schema:version":3,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22104","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22104","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":4942431,"dvcore:storageIdentifier":"s3://juelich_data:194ac4622b7-9412b506d906","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"c6f28ec7594f066b0b4185c789c6416cdd736995919daa9a61905718a0c69000"}},{"schema:description":"The data corresponds to the startup phase of the 100 kW Proton Exchange Membrane (PEM) electrolyzer, during which the system’s control strategies were tested and initiated. All setpoints were configured manually, without the implementation of automated control sequences. During this phase, the temperature control loop was activated and tested to ensure thermal stable system operation under varying load and pressure conditions for different control parameters.","schema:name":"2019-09-03_Data_startup-phase_manual-mode_temperature-control-loop.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2019-09-03_Startup-phase_temperature-control-loop","schema:version":3,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=21939","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/21939","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":516254,"dvcore:storageIdentifier":"s3://juelich_data:194ac462355-07a5abbaea37","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"656931c11e12cf1c43f6736a8e4ae798735c1be56836a96aef9f6d1aacd0c903"}},{"schema:description":"The system is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the corresponding measured data recorded during operation of the set-point profile, which defines a temperature ramp.","schema:name":"2019-09-18_1st_Data-measured_Current-pressure-temperature-ramp.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2019-09-18_1st_Current-pressure-temperature-ramp","schema:version":7,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22144","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22144","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":1747884,"dvcore:storageIdentifier":"s3://juelich_data:194ac462391-4f7823d4194c","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"b3402e2a8bf9bd29e79fae59bca7971053eb9ffef7e4b54a4d7ddeb157a1130f"}},{"schema:description":"The 100 kW Proton Exchange Membrane (PEM) electrolyzer is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the set-point profile, which defines a temperature ramp executed through a predefined control sequence.","schema:name":"2019-09-18_1st_Setpoint-profile_Current-pressure-temperature-ramp.xls","dvcore:restricted":false,"dvcore:directoryLabel":"2019-09-18_1st_Current-pressure-temperature-ramp","schema:version":5,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=21992","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/21992","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.ms-excel","dvcore:filesize":41472,"dvcore:storageIdentifier":"s3://juelich_data:194ac462362-7dc8c855d921","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"c509fc2e620d1cacde2cb80a53263578d4c9277abd2f0d752466afdffb9a9a89"}},{"schema:description":"The system is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the corresponding measured data recorded during operation of the set-point profile, which defines a current, pressure and temperature ramp.","schema:name":"2019-09-18_2nd_Data-measured_Current-pressure-temperature-ramp.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2019-09-18_2nd_Current-pressure-temperature-ramp","schema:version":5,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22035","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22035","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":2895318,"dvcore:storageIdentifier":"s3://juelich_data:194ac4623f7-e949ab32b035","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"66f83eda9076df4b961b63d43fe3841d535d820b5449677490ccbc9e5826d42e"}},{"schema:description":"This file contains the set-point profile, which defines a current, pressure and temperature ramp executed through a predefined control sequence.","schema:name":"2019-09-18_2nd_Setpoint-profil_current-pressure-temperature-ramp.xls","dvcore:restricted":false,"dvcore:directoryLabel":"2019-09-18_2nd_Current-pressure-temperature-ramp","schema:version":5,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=21916","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/21916","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.ms-excel","dvcore:filesize":41472,"dvcore:storageIdentifier":"s3://juelich_data:194ac4623ab-a2962f72a9d8","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"1121eaae668e3f30078f89161c78512ec2563d920854b75786a32771a391dab3"}},{"schema:description":"The data corresponds to the 100 kW Proton Exchange Membrane (PEM) electrolyzer, during which the system’s control strategies were tested and initiated. All set-points were configured manually, without the implementation of automated control sequences. The temperature control loop was activated and tested to ensure thermal stable system operation under varying load conditions and different control parameters.","schema:name":"2019-09-27_Data_manual-mode_temperature-control-loop.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2019-09-27_Temperature-control-loop","schema:version":4,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22129","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22129","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":5535678,"dvcore:storageIdentifier":"s3://juelich_data:194ac462494-8b53187a635e","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"c0b080bb405fdcd703bfcbbea8fcfbc837fbb77ae1b8dfaa1583e87c4fbb6be8"}},{"schema:description":"The data corresponds to the 100 kW Proton Exchange Membrane (PEM) electrolyzer. A heating-up curve was recorded to monitor the thermal behavior of the system during initial operation. During this procedure, the load conditions were systematically varied in order to determine the optimal transition time from standstill to nominal operation.","schema:name":"2019-10-09_Data_manual-mode_heating-up.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2019-10-09_Heating-up","schema:version":4,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22007","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22007","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":1914091,"dvcore:storageIdentifier":"s3://juelich_data:194ac4624fc-5cde7b81e2b1","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"68cd12cd74e9934e9547ea51fe1c8d123baac3a7ff0e8cae9febd6c4249c0b94"}},{"schema:description":"The data corresponds to the 100 kW Proton Exchange Membrane (PEM) electrolyzer. A heating-up curve was recorded to monitor the thermal behavior of the system during initial operation. During this procedure, the load conditions were systematically varied in order to determine the optimal transition time from standstill to nominal operation.","schema:name":"2019-10-29_Data_manual-mode_heating-up.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2019-10-29_Heating-up","schema:version":4,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=21873","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/21873","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":1084812,"dvcore:storageIdentifier":"s3://juelich_data:194ac46252e-5fa93179d327","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"487f6a6e3936236049c57f684508de67d68c8a373538a087baffecac71cd802e"}},{"schema:description":"The data corresponds to the 100 kW Proton Exchange Membrane (PEM) electrolyzer. A heating-up curve was recorded to monitor the thermal behavior of the system during initial operation. During this procedure, the load conditions were systematically varied in order to determine the optimal transition time from standstill to nominal operation.","schema:name":"2020-03-18_1st_Data_manual-mode_heating-up.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2020-03-18_1st_heating-up","schema:version":3,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=21924","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/21924","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":4471233,"dvcore:storageIdentifier":"s3://juelich_data:194ac4b9fc6-b4152d2debbf","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"485011a47cc640a6a130b09244040e340fa65bb3bcd15ae8733c03511ae7c014"}},{"schema:description":"The data corresponds to the 100 kW Proton Exchange Membrane (PEM) electrolyzer. A heating-up curve was recorded to monitor the thermal behavior of the system during initial operation. During this procedure, the load conditions were systematically varied in order to determine the optimal transition time from standstill to nominal operation.","schema:name":"2020-03-18_2nd_Data_manual-mode_heating-up.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2020-03-18_2nd_heating-up","schema:version":4,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22083","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22083","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":1427879,"dvcore:storageIdentifier":"s3://juelich_data:194ac4ba020-aeac943abef4","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"be9b7dea0ea0183a510925786e4eb2d76399eed47a566030c45acf8c78794a3e"}},{"schema:description":"The data corresponds to the 100 kW Proton Exchange Membrane (PEM) electrolyzer. A heating-up curve was recorded to monitor the thermal behavior of the system during initial operation. During this procedure, the load conditions were systematically varied in order to determine the optimal transition time from standstill to nominal operation.","schema:name":"2020-03-20_Data_manual-mode_heating-up.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2020-03-20_Heating-up","schema:version":4,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22101","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22101","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":5476551,"dvcore:storageIdentifier":"s3://juelich_data:194ac4ba0df-264dc80e6f67","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"ba501057350caf159a9a842f6c9b4b2b22b37b69d93474bb04414a958cdeab6d"}},{"schema:description":"The data corresponds to the 100 kW Proton Exchange Membrane (PEM) electrolyzer, during which the system’s control strategies were tested and initiated. All set-points were configured manually, without the implementation of automated control sequences. During this phase, the temperature control loop was activated and tested to ensure thermal stable system operation under varying load and pressure conditions for different control parameters and set-points in temperature.","schema:name":"2020-04-06_Data_manual-mode_temperature-control-loop.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2020-04-06_Temperature-control-loop","schema:version":4,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=21972","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/21972","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":9638769,"dvcore:storageIdentifier":"s3://juelich_data:194ac4ba1d4-d9d1349d260d","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"fa8144e559fa270aedcf93c598cbd33f8647ce8ae49fd175ee8d87fee8a6d91f"}},{"schema:description":"The data corresponds to the 100 kW Proton Exchange Membrane (PEM) electrolyzer. A heating-up curve was recorded to monitor the thermal behavior of the system during initial operation. During this procedure, the load conditions were systematically varied in order to determine the optimal transition time from standstill to nominal operation.","schema:name":"2020-04-07_Data_manual-mode_heating-up.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2020-04-07_Heating-up","schema:version":4,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=21874","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/21874","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":4489520,"dvcore:storageIdentifier":"s3://juelich_data:194ac4ba30f-3c020667db53","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"8b4c489c4b74ab557514eb5891f12b457e8e88d76cf4efa659c1d00527c8b100"}},{"schema:description":"The data corresponds to the 100 kW Proton Exchange Membrane (PEM) electrolyzer. A heating-up curve was recorded to monitor the thermal behavior of the system during initial operation. During this procedure, the load conditions were systematically varied in order to determine the optimal transition time from standstill to nominal operation. Moreover, the temperature control loop was tested to ensure thermal stable system operation under varying load and pressure conditions for different control parameters and set-points in temperature.","schema:name":"2020-04-08_Data_manual-mode_heating-up_temperature_control.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2020-04-08_Heating-up_temperature_control","schema:version":4,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22094","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22094","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":5351950,"dvcore:storageIdentifier":"s3://juelich_data:194ac4ba3bc-1088ec3a47cc","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"cf187301a8fc32dc5298a74295865bfddc7b30401644a7cf9969c03a29f7b141"}},{"schema:description":"The data corresponds to the 100 kW Proton Exchange Membrane (PEM) electrolyzer. A heating-up curve was recorded to monitor the thermal behavior of the system during initial operation. During this procedure, the load conditions were systematically varied in order to determine the optimal transition time from standstill to nominal operation. Moreover, the temperature control loop was tested to ensure thermal stable system operation under varying load and pressure conditions for different control parameters and set-points in temperature.","schema:name":"2020-04-09_Data_manual-mode_heating-up_temperature_control.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2020-04-09_Heating-up_temperature_control","schema:version":4,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22028","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22028","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":10524414,"dvcore:storageIdentifier":"s3://juelich_data:194ac4ba50d-a5835dcd026d","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"7fc71304a9cfd35710f4c3d6c24088981a5a2d0019534205968267da28544df0"}},{"schema:description":"The data corresponds to the 100 kW Proton Exchange Membrane (PEM) electrolyzer. A heating-up curve was recorded to monitor the thermal behavior of the system during initial operation. During this procedure, the load conditions were systematically varied in order to determine the optimal transition time from standstill to nominal operation. Moreover, the temperature control loop was tested to ensure thermal stable system operation under varying load and pressure conditions for different control parameters and set-points in temperature.","schema:name":"2020-04-20_Data_manual-mode_heating-up_temperature_control.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2020-04-20_Heating-up_temperature_control","schema:version":4,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=21908","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/21908","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":15572797,"dvcore:storageIdentifier":"s3://juelich_data:194ac4ba69d-7acf4963f292","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"c8f36c2897acdac82ed41b613aad2f563233d0648528cffad3ebd565a8237a60"}},{"schema:description":"The data corresponds to the 100 kW Proton Exchange Membrane (PEM) electrolyzer. A heating-up curve was recorded to monitor the thermal behavior of the system during initial operation. During this procedure, the load conditions were systematically varied in order to determine the optimal transition time from standstill to nominal operation. Moreover, the temperature control loop was tested to ensure thermal stable system operation under varying load and pressure conditions for different control parameters and set-points in temperature.","schema:name":"2020-04-22_Data_manual-mode_heating-up_temperature_control.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2020-04-22_Heating-up_temperature-control","schema:version":4,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22145","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22145","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":26408256,"dvcore:storageIdentifier":"s3://juelich_data:194ac4ba9da-2ddca1a13025","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"134f2892aacd2bfcf5504cccfc2247a95565c45de14d3d66d7e5d29144ee3c48"}},{"schema:description":"The data corresponds to the 100 kW Proton Exchange Membrane (PEM) electrolyzer. A heating-up curve was recorded to monitor the thermal behavior of the system during initial operation. During this procedure, the load conditions were systematically varied in order to determine the optimal transition time from standstill to nominal operation. Moreover, the temperature control loop was tested to ensure thermal stable system operation under varying load and pressure conditions for different control parameters and set-points in temperature.","schema:name":"2020-05-06_Data_manual-mode_heating-up_temperature_control.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2020-05-06_Heating-up_temperature-control","schema:version":4,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22081","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22081","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":15606242,"dvcore:storageIdentifier":"s3://juelich_data:194ac4bb080-7e3af6fa933f","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"58b6624e7100e17d4434b076d0361d39792dd9cb6b1615835a9453b91caf8d2f"}},{"schema:description":"The data corresponds to the 100 kW Proton Exchange Membrane (PEM) electrolyzer. A heating-up curve was recorded to monitor the thermal behavior of the system during initial operation. During this procedure, the load conditions were static in order to determine the optimal transition time from standstill to nominal operation.","schema:name":"2020-05-11_Data_manual-mode_heating-up.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2020-05-11_Heating-up","schema:version":4,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=21901","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/21901","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":6543151,"dvcore:storageIdentifier":"s3://juelich_data:194ac4bb198-b5ec26ddb46b","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"e081804660198c68f664600a518a15e1015d56f118c6771a0b581c1ce3859dd0"}},{"schema:description":"The data corresponds to the 100 kW Proton Exchange Membrane (PEM) electrolyzer. A heating-up curve was recorded to monitor the thermal behavior of the system during initial operation. During this procedure, the load conditions were systematically varied in order to determine the optimal transition time from standstill to nominal operation. Moreover, the temperature control loop was tested to ensure thermal stable system operation under varying load and pressure conditions for different control parameters and set-points in temperature.","schema:name":"2020-05-13_Data_manual-mode_heating-up_temperature_control.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2020-05-13_Heating-up_temperature-control","schema:version":4,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=21947","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/21947","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":13536918,"dvcore:storageIdentifier":"s3://juelich_data:194ac4bb314-72dbeb461536","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"41bde56431b36fa91113a9b334fdc2cd0f7c31a7700001ae48c513259144394c"}},{"schema:description":"The data corresponds to the 100 kW Proton Exchange Membrane (PEM) electrolyzer. A heating-up curve was recorded to monitor the thermal behavior of the system during initial operation. During this procedure, the load conditions were systematically varied in order to determine the optimal transition time from standstill to nominal operation. Moreover, the temperature control loop was tested to ensure thermal stable system operation under varying load and pressure conditions for different control parameters and set-points in temperature.","schema:name":"2020-05-15_Data_manual-mode_heating-up_temperature_control.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2020-05-15_Heating-up_temperature-control","schema:version":4,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22161","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22161","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":13647668,"dvcore:storageIdentifier":"s3://juelich_data:194ac4bb449-f100b3462a0c","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"e6c87cd757f8b881332e6ede384ba9aec058f6413aef68983000b3d30f23b4fc"}},{"schema:description":"The data corresponds to the 100 kW Proton Exchange Membrane (PEM) electrolyzer. A heating-up curve was recorded to monitor the thermal behavior of the system during initial operation. During this procedure, the load conditions were systematically varied in order to determine the optimal transition time from standstill to nominal operation. Moreover, the temperature control loop was tested to ensure thermal stable system operation under varying load and pressure conditions for different control parameters and set-points in temperature.","schema:name":"2020-05-20_Data_manual-mode_heating-up_temperature_control.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2020-05-20_Heating-up_temperature-control","schema:version":4,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=21962","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/21962","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":14168060,"dvcore:storageIdentifier":"s3://juelich_data:194ac4bb59c-c003126f03d1","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"bb6039a3a4ebb7ab8f2a65df7b761a82685e6596599ca4b2ee9ade7a235275d2"}},{"schema:description":"The data corresponds to the 100 kW Proton Exchange Membrane (PEM) electrolyzer. A heating-up curve was recorded to monitor the thermal behavior of the system during initial operation. During this procedure, the load conditions were systematically varied in order to determine the optimal transition time from standstill to nominal operation. Moreover, the temperature control loop was tested to ensure thermal stable system operation under varying load and pressure conditions for different control parameters and set-points in temperature.","schema:name":"2020-05-25_Data_manual-mode_heating-up_temperature_control.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2020-05-25_Heating-up_temperature-control","schema:version":4,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=21943","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/21943","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":13732611,"dvcore:storageIdentifier":"s3://juelich_data:194ac4bb7ca-b25071538437","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"d95021749b06501952bef5a995f2d653582bf3b7cc0d6c4ed3bba4bf70c4d2ea"}},{"schema:description":"The data corresponds to the 100 kW Proton Exchange Membrane (PEM) electrolyzer. A heating-up curve was recorded to monitor the thermal behavior of the system during initial operation. During this procedure, the load conditions were systematically varied in order to determine the optimal transition time from standstill to nominal operation. Moreover, the temperature control loop was tested to ensure thermal stable system operation under varying load and pressure conditions for different control parameters and set-points in temperature.","schema:name":"2020-05-28_Data_manual-mode_heating-up_temperature_control.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2020-05-28_Heating-up_temperature-control","schema:version":4,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22046","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22046","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":8249371,"dvcore:storageIdentifier":"s3://juelich_data:194ac4bb949-83478bc4d4a4","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"2ab5e72208b8963cc135de9d8a910ac594e3a3b75f9d68aa0f0b1edfa865e913"}},{"schema:description":"The data corresponds to the 100 kW Proton Exchange Membrane (PEM) electrolyzer. A heating-up curve was recorded to monitor the thermal behavior of the system during initial operation. During this procedure, the load conditions were systematically varied in order to determine the optimal transition time from standstill to nominal operation. Moreover, the temperature control loop was tested to ensure thermal stable system operation under varying load and pressure conditions for different control parameters and set-points in temperature.","schema:name":"2020-06-02_Data_manual-mode_heating-up_temperature_control.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2020-06-02_Heating-up_temperature-control","schema:version":4,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=21952","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/21952","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":9414106,"dvcore:storageIdentifier":"s3://juelich_data:194ac4bbaab-ce5d7f81988d","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"7c77381847f0a311806b2d8c6979388e64c7608ede062600e5e4b928c2c8095e"}},{"schema:description":"The data corresponds to the 100 kW Proton Exchange Membrane (PEM) electrolyzer. A heating-up curve was recorded to monitor the thermal behavior of the system during initial operation. During this procedure, the load conditions were systematically varied in order to determine the optimal transition time from standstill to nominal operation. Moreover, the temperature control loop was tested to ensure thermal stable system operation under varying load and pressure conditions for different control parameters and set-points in temperature.","schema:name":"2020-06-03_Data_manual-mode_heating-up_temperature_control.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2020-06-03_Heating-up_temperature-control","schema:version":4,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22054","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22054","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":11655489,"dvcore:storageIdentifier":"s3://juelich_data:194ac4bbca7-bb3432bc1fef","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"8a779f38bedff3f01a158f9bfe43b52ba7b2c909621b40bd73a9e89886a58b55"}},{"schema:description":"The data corresponds to the 100 kW Proton Exchange Membrane (PEM) electrolyzer. A heating-up curve was recorded to monitor the thermal behavior of the system during initial operation. During this procedure, the load conditions were systematically varied in order to determine the optimal transition time from standstill to nominal operation. Moreover, the temperature control loop was tested to ensure thermal stable system operation under varying load and pressure conditions for different control parameters and set-points in temperature.","schema:name":"2020-06-05_Data_manual-mode_heating-up_temperature_control.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2020-06-05_Heating-up_temperature-control","schema:version":4,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=21899","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/21899","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":3262848,"dvcore:storageIdentifier":"s3://juelich_data:194ac4bbd8e-81e89834cdf3","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"eb3169461975ff8193a036cdedce496be90c7a38358cee4ed4b3499724ba5f26"}},{"schema:description":"The data corresponds to the 100 kW Proton Exchange Membrane (PEM) electrolyzer, during which the system’s control strategies were tested and initiated. All set-points were configured manually, without the implementation of automated control sequences. During this phase, the temperature control loop was activated and tested to ensure thermal stable system operation under varying load and pressure conditions for different control parameters and set-points in temperature.","schema:name":"2020-06-05_Data_manual-mode_temperature-control-loop.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2020-06-05_Temperature-control-loop","schema:version":4,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22005","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22005","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":6463201,"dvcore:storageIdentifier":"s3://juelich_data:194ac4bbe94-dd0ad7489bba","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"833821efa62ab3a786b20173b9af2e56fc1f8cabfdf69a4b7689e1378ccd6da8"}},{"schema:description":"The data corresponds to the 100 kW Proton Exchange Membrane (PEM) electrolyzer. A heating-up curve was recorded to monitor the thermal behavior of the system during initial operation. During this procedure, no load is applied in order to determine the optimal transition time from standstill to nominal operation.","schema:name":"2020-06-08_Data_manual-mode_heating-up.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2020-06-08_Heating-up","schema:version":4,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=21923","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/21923","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":10781685,"dvcore:storageIdentifier":"s3://juelich_data:194ac4bc015-aeebbe74be61","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"b528d29581afbd3a7da304d6e2f53bbafda8d4409c235e74c5fab2d49b9c4087"}},{"schema:description":"The data corresponds to the 100 kW Proton Exchange Membrane (PEM) electrolyzer. A heating-up curve was recorded to monitor the thermal behavior of the system during initial operation. During this procedure, no load is applied in order to determine the optimal transition time from standstill to nominal operation.","schema:name":"2020-06-09_Data_manual-mode_heating-up.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2020-06-09_Heating-up","schema:version":4,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=21929","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/21929","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":8606026,"dvcore:storageIdentifier":"s3://juelich_data:194ac4bc186-6d3181756d29","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"923dbf5f1254497f19ab0b154e99929142ed3efaa14c57005985d479205c4905"}},{"schema:description":"The data corresponds to the 100 kW Proton Exchange Membrane (PEM) electrolyzer. A heating-up curve was recorded to monitor the thermal behavior of the system during initial operation. During this procedure, no load is applied in order to determine the optimal transition time from standstill to nominal operation.","schema:name":"2020-06-10_Data_manual-mode_heating-up.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2020-06-10_Heating-up","schema:version":4,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22032","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22032","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":12036646,"dvcore:storageIdentifier":"s3://juelich_data:194ac4bc30a-c7da29272762","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"e8e4a285fb8b4e096f473245bfe527241cd8e311590953500921da23a677b0eb"}},{"schema:description":"The data corresponds to the 100 kW Proton Exchange Membrane (PEM) electrolyzer. A heating-up curve was recorded to monitor the thermal behavior of the system during initial operation. During this procedure, the load conditions were systematically varied in order to determine the optimal transition time from standstill to nominal operation. Moreover, the temperature control loop was tested to ensure thermal stable system operation under varying load and pressure conditions for different control parameters and set-points in temperature.","schema:name":"2020-06-19_Data_manual-mode_heating-up_temperature_control.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2020-06-19_Heating-up_temperature-control","schema:version":4,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=21904","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/21904","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":7889570,"dvcore:storageIdentifier":"s3://juelich_data:194ac4bc4bd-f02fd26a2ed5","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"1b201e4a9e201d971c267bcebf41aa44ac48fd5aceab078f7e07832fb13d9366"}},{"schema:description":"The data corresponds to the 100 kW Proton Exchange Membrane (PEM) electrolyzer. A heating-up curve was recorded to monitor the thermal behavior of the system during initial operation. During this procedure, the load conditions were systematically varied in order to determine the optimal transition time from standstill to nominal operation. Moreover, the temperature control loop was tested to ensure thermal stable system operation under varying load and pressure conditions for different control parameters and set-points in temperature.","schema:name":"2020-06-24_Data_manual-mode_heating-up_temperature_control.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2020-06-24_Heating-up_temperature-control","schema:version":4,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22064","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22064","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":4972634,"dvcore:storageIdentifier":"s3://juelich_data:194ac4bc5b6-91201865c389","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"2f9320994a3c8ba38830ef9feec58845bfb8fd1dbed7267ab419e049425b2a4f"}},{"schema:description":"The data corresponds to the 100 kW Proton Exchange Membrane (PEM) electrolyzer. A heating-up curve was recorded to monitor the thermal behavior of the system during initial operation. During this procedure, no load was applied in order to determine the optimal transition time from standstill to nominal operation.","schema:name":"2020-07-03_Data_manual-mode_heating-up.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2020-07-03_Heating-up","schema:version":4,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22137","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22137","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":11905283,"dvcore:storageIdentifier":"s3://juelich_data:194ac4bc6f8-0185c28c8d40","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"5b232d1630f919465a8ade07560501a778ae5435f2adb225b6aff948dc4a1370"}},{"schema:description":"The system is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the corresponding measured data recorded during operation of the set-point profile, which defines a wind profile.","schema:name":"2020-07-07_1st_Data-measured_Wind-Profile.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2020-07-07_1st_Wind-Profile","schema:version":4,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=21996","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/21996","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":1626644,"dvcore:storageIdentifier":"s3://juelich_data:194ac4bc80d-b0212ceb4b0f","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"603dac419d2b8d099f8eed6e06eef9592ed6954d30da23c2c6d3d7e2020b5705"}},{"schema:description":"The 100 kW Proton Exchange Membrane (PEM) electrolyzer is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the set-point profile, which defines a windprofile executed through a predefined control sequence.","schema:name":"2020-07-07_1st_Setpoint-profile_Wind-Profile.xls","dvcore:restricted":false,"dvcore:directoryLabel":"2020-07-07_1st_Wind-Profile","schema:version":4,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=21891","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/21891","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.ms-excel","dvcore:filesize":468992,"dvcore:storageIdentifier":"s3://juelich_data:194ac4bc7cf-9c7ee7eeb162","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"9ea16741e0d37d080c41b06214f3a68d5c1d8d33700c1a995fc8cd427429e9ba"}},{"schema:description":"The system is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the corresponding measured data recorded during operation of the set-point profile, which defines a wind profile.","schema:name":"2020-07-07_2nd_Data-measured_Wind-Profile.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2020-07-07_2nd_Wind-Profile","schema:version":4,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22157","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22157","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":3001293,"dvcore:storageIdentifier":"s3://juelich_data:194ac4bc882-e58819959397","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"40fadcd00c9c88e1dbe71f79b689756993d6cd26d876de5222f1030f27edc4c2"}},{"schema:description":"The 100 kW Proton Exchange Membrane (PEM) electrolyzer is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the set-point profile, which defines a wind profile executed through a predefined control sequence.","schema:name":"2020-07-07_2nd_Setpoint-profile_Wind-Profile.xls","dvcore:restricted":false,"dvcore:directoryLabel":"2020-07-07_2nd_Wind-Profile","schema:version":6,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22079","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22079","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.ms-excel","dvcore:filesize":470016,"dvcore:storageIdentifier":"s3://juelich_data:194ac4bc82a-a1800fa65a98","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"f6e96c4162b44c0f8b495e09bfe6f0ef55bf5eb251b52beb504793dd1f8645d9"}},{"schema:description":"The data corresponds to the 100 kW Proton Exchange Membrane (PEM) electrolyzer. A heating-up curve was recorded to monitor the thermal behavior of the system during initial operation. During this procedure, the load conditions were systematically varied in order to determine the optimal transition time from standstill to nominal operation.","schema:name":"2020-07-09_Data_manual-mode_heating-up.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2020-07-09_Heating-up","schema:version":4,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22073","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22073","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":12416650,"dvcore:storageIdentifier":"s3://juelich_data:194ac4bc960-92e3b8426b63","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"3e26a21199f03aecb1f97a8026ee0cf9abfed802b1ddb8a0089be4f2b206a07e"}},{"schema:description":"The data corresponds to the 100 kW Proton Exchange Membrane (PEM) electrolyzer. A heating-up curve was recorded to monitor the thermal behavior of the system during initial operation. During this procedure, the load conditions were systematically varied in order to determine the optimal transition time from standstill to nominal operation.","schema:name":"2020-07-13_Data_manual-mode_heating-up.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2020-07-13_Heating-up","schema:version":4,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22122","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22122","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":13928253,"dvcore:storageIdentifier":"s3://juelich_data:194ac4bcb44-f397925427ea","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"3d16a814e6264c0496897bd7bf56c20ed19bdb18fe4042a7a745482bdc488b68"}},{"schema:description":"The data corresponds to the 100 kW Proton Exchange Membrane (PEM) electrolyzer. A heating-up curve was recorded to monitor the thermal behavior of the system during initial operation. During this procedure, the load conditions were systematically varied in order to determine the optimal transition time from standstill to nominal operation.","schema:name":"2020-07-14_Data_manual-mode_heating-up.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2020-07-14_Heating-up","schema:version":4,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22061","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22061","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":13458368,"dvcore:storageIdentifier":"s3://juelich_data:194ac4bcce8-6b0aa183e7b6","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"8a1af80e8e7cf943054fcfe8944f062a3e3530f862f458d5a7cd4fe07ad3815e"}},{"schema:description":"The data corresponds to the 100 kW Proton Exchange Membrane (PEM) electrolyzer. A heating-up curve was recorded to monitor the thermal behavior of the system during initial operation. During this procedure, the load conditions were systematically varied in order to determine the optimal transition time from standstill to nominal operation. Moreover, the temperature control loop was tested to ensure thermal stable system operation under varying load and pressure conditions for different control parameters and set-points in temperature.","schema:name":"2020-07-23_Data_manual-mode_heating-up_temperature_control.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2020-07-23_Heating-up_temperature-control","schema:version":4,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=21925","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/21925","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":15681845,"dvcore:storageIdentifier":"s3://juelich_data:194ac4bd0d5-afb09dbe4fe4","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"ec0a301ca1b1a5edbdb30f3bd6208e2288404884c09341700222a58306821452"}},{"schema:description":"The data corresponds to the 100 kW Proton Exchange Membrane (PEM) electrolyzer. A heating-up curve was recorded to monitor the thermal behavior of the system during initial operation. During this procedure, the load conditions were systematically varied in order to determine the optimal transition time from standstill to nominal operation. Moreover, the temperature control loop was tested to ensure thermal stable system operation under varying load and pressure conditions for different control parameters and set-points in temperature.","schema:name":"2020-07-27_Data_manual-mode_heating-up_temperature_control.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2020-07-27_Heating-up_temperature-control","schema:version":4,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22139","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22139","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":15633461,"dvcore:storageIdentifier":"s3://juelich_data:194ac4bd3e4-3b0c3a527ef7","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"e895c33f68492fa5aa96dfdb8c9c6370b1d6aac1acb8d8c3461ec61b7d4d3808"}},{"schema:description":"The data corresponds to the 100 kW Proton Exchange Membrane (PEM) electrolyzer. A heating-up curve was recorded to monitor the thermal behavior of the system during initial operation. During this procedure, the load conditions were systematically varied in order to determine the optimal transition time from standstill to nominal operation. Moreover, the temperature control loop was tested to ensure thermal stable system operation under varying load and pressure conditions for different control parameters and set-points in temperature.","schema:name":"2020-08-18_Data_manual-mode_heating-up_temperature_control.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2020-08-18_Heating-up_temperature-control","schema:version":4,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22080","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22080","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":15045302,"dvcore:storageIdentifier":"s3://juelich_data:194ac4bd607-dd7df0141675","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"b0e811154cf056b0a8a7e18c16035ec5ff442ad0dba6c6272008e0ab117b3446"}},{"schema:description":"The data corresponds to the 100 kW Proton Exchange Membrane (PEM) electrolyzer. A heating-up curve was recorded to monitor the thermal behavior of the system during initial operation. During this procedure, the load conditions were systematically varied in order to determine the optimal transition time from standstill to nominal operation.","schema:name":"2020-08-19_Data_manual-mode_heating-up.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2020-08-19_Heating-up","schema:version":4,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22002","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22002","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":797055,"dvcore:storageIdentifier":"s3://juelich_data:194ac4bd687-95fedede7fbd","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"8cbc7eb9c93402b985c25b29f2b9c1877a02d09801fb42fd14c2fb1e2f6f6e6b"}},{"schema:description":"The data corresponds to the 100 kW Proton Exchange Membrane (PEM) electrolyzer. A heating-up curve was recorded to monitor the thermal behavior of the system during initial operation. During this procedure, the load conditions were systematically varied in order to determine the optimal transition time from standstill to nominal operation. Moreover, the temperature control loop was tested to ensure thermal stable system operation under varying load and pressure conditions for different control parameters and set-points in temperature.","schema:name":"2020-08-20_Data_manual-mode_heating-up_temperature_control.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2020-08-20_Heating-up_temperature-control","schema:version":4,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=21893","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/21893","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":16440009,"dvcore:storageIdentifier":"s3://juelich_data:194ac4bd7b3-6bf6d5f7ef42","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"cc212c3339e3fadd250ef2d3191333adbc4498beaf9bb81178bb3984c206f295"}},{"schema:description":"The data corresponds to the 100 kW Proton Exchange Membrane (PEM) electrolyzer. A heating-up curve was recorded to monitor the thermal behavior of the system during initial operation. During this procedure, the load conditions were systematically varied in order to determine the optimal transition time from standstill to nominal operation. Moreover, the temperature control loop was tested to ensure thermal stable system operation under varying load and pressure conditions for different control parameters and set-points in temperature.","schema:name":"2020-08-24_Data_manual-mode_heating-up_temperature_control.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2020-08-24_Heating-up_temperature-control","schema:version":4,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22154","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22154","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":15315812,"dvcore:storageIdentifier":"s3://juelich_data:194ac4bd9e1-554c9271fdc8","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"e4fc444f0590168b3c0c017f6b2d544bc20b202db0573ce2c5eb497d6ee1d7f2"}},{"schema:description":"The system is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the corresponding measured data recorded during operation of the set-point profile, which defines a temperature ramp.","schema:name":"2020-08-25_Data-measured_heating-up_temperature-ramp.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2020-08-25_Heating-up_temperature-ramp","schema:version":4,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=21978","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/21978","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":1934091,"dvcore:storageIdentifier":"s3://juelich_data:194ac4bdb1f-cb73b9375b11","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"3b7280f7435f4ccc16a6c18f4638a2a3d4f643d4b145e8651e3a9317791e00c8"}},{"schema:description":"The 100 kW Proton Exchange Membrane (PEM) electrolyzer is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the set-point profile, which defines a temperature ramp executed through a predefined control sequence.","schema:name":"2020-08-25_Setpoint-profile_heating-up_temperature-ramp.xls","dvcore:restricted":false,"dvcore:directoryLabel":"2020-08-25_Heating-up_temperature-ramp","schema:version":4,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=21979","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/21979","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.ms-excel","dvcore:filesize":188416,"dvcore:storageIdentifier":"s3://juelich_data:194ac4bdac9-412cf48ec0ec","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"3de47d28d87e2493cb2ed24bd111f79d8ea7317ffd67e55efa7264c39b079053"}},{"schema:description":"The system is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the corresponding measured data recorded during operation of the set-point profile, which defines a trajectory of a Kombi-Step-Response in current density .","schema:name":"2020-08-26_Data-measured_Kombi-Step-Response.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2020-08-26_Kombi-Step-Response","schema:version":3,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22077","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22077","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":14481995,"dvcore:storageIdentifier":"s3://juelich_data:194ac4bdcc2-242e12f452e2","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"891a33a5b63424df250cb8ef1a13b6a14d64cc1ba1b7993f80d2de7b101e4d57"}},{"schema:description":"The 100 kW Proton Exchange Membrane (PEM) electrolyzer is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the set-point profile, which defines a trajectory of a Kombi-Step-Response in current density executed through a predefined control sequence.","schema:name":"2020-08-26_Setpoint-profile_Kombi-Step-Response.xls ","dvcore:restricted":false,"dvcore:directoryLabel":"2020-08-26_Kombi-Step-Response","schema:version":4,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=21888","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/21888","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.ms-excel","dvcore:filesize":199168,"dvcore:storageIdentifier":"s3://juelich_data:194ac4bdb3f-e2cf21781822","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"8caf06548b8db8aa9de91b15d6900fec474883c1bc6e6bd2d3c4344eb0763ac7"}},{"schema:description":"The system is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the corresponding measured data recorded during operation of the set-point profile, which defines a trajectory of a Kombi Current-Step Response 20min executed through a predefined control sequence.","schema:name":"2020-08-27_Data-measured_Kombi-Current-Step-Response-20min.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2020-08-27_Kombi-Current-Step-Response_20min","schema:version":8,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22146","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22146","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":13952167,"dvcore:storageIdentifier":"s3://juelich_data:194ac4be003-27559d312e4c","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"ab8606da9ad30baab9430e85d50d5afecfc8d72853604616d96aaad9c3895dde"}},{"schema:description":"The 100 kW Proton Exchange Membrane (PEM) electrolyzer is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the set-point profile, which defines a trajectory of a Kombi Current-Step Response 20min executed through a predefined control sequence.","schema:name":"2020-08-27_Setpoint-profile_Kombi-Current-Step Response_20min.xls","dvcore:restricted":false,"dvcore:directoryLabel":"2020-08-27_Kombi-Current-Step-Response_20min","schema:version":5,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22000","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22000","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.ms-excel","dvcore:filesize":192512,"dvcore:storageIdentifier":"s3://juelich_data:194ac4bde3b-d4e416726fb5","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"56dffa158abc736df8aacdf02c7751601f122456a92660fbfd1720cceb1df22b"}},{"schema:description":"The system is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the corresponding measured data recorded during operation of the set-point profile, which defines a trajectory of Kombi Voltage Step Response 20min.","schema:name":"2020-08-28_Data-measured_Kombi-Voltage-Step-Response_20min.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2020-08-28_Kombi-Voltage-Step-Response_20min","schema:version":7,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22065","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22065","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":14435747,"dvcore:storageIdentifier":"s3://juelich_data:194ac4be209-4aeb43e3cd82","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"7cd3daaa551aa2d2a5ee39545396a6c54d0a8172914bd9415c9f635008f508ce"}},{"schema:description":"The 100 kW Proton Exchange Membrane (PEM) electrolyzer is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the set-point profile, which defines a trajectory of a Kombi Voltage Step Response 20min executed through a predefined control sequence.","schema:name":"2020-08-28_Setpoint-profile_Kombi-Voltage-Step-Response_20min.xls","dvcore:restricted":false,"dvcore:directoryLabel":"2020-08-28_Kombi-Voltage-Step-Response_20min","schema:version":5,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22027","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22027","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.ms-excel","dvcore:filesize":192512,"dvcore:storageIdentifier":"s3://juelich_data:194ac4be0a3-f2b212e9c380","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"06b33b2919be3282fa0f70476c37c8dddcad1d76de364e3c4ddeccc447e0f34a"}},{"schema:description":"The system is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the corresponding measured data recorded during operation of the set-point profile, which defines a trajectory of a wind turbine 20min. ","schema:name":"2020-08-31_Data-measured_Kombi-Current-Wind Power_20min.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2020-08-31_Kombi-Current-Wind Power_20min","schema:version":6,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=21960","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/21960","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":12652040,"dvcore:storageIdentifier":"s3://juelich_data:194ac4be3cf-0bd6167d9169","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"de8188719123208584897957d6de26dc06e547a84b433f8b4b1f5d3abf7220f4"}},{"schema:description":"The 100 kW Proton Exchange Membrane (PEM) electrolyzer is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the set-point profile, which defines a trajectory of a wind turbine 20min executed through a predefined control sequence.","schema:name":"2020-08-31_Setpoint-profile_Kombi-Current-Wind Power_20min.xls","dvcore:restricted":false,"dvcore:directoryLabel":"2020-08-31_Kombi-Current-Wind Power_20min","schema:version":3,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=21882","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/21882","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.ms-excel","dvcore:filesize":6509056,"dvcore:storageIdentifier":"s3://juelich_data:194ac4be2ab-c8c7f0d1e7fc","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"1f8a2e817a2b75321750fb7cbe11a9bb48c99530151d2f3e16ec05b7d92720d9"}},{"schema:description":"The system is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the corresponding measured data recorded during operation of the set-point profile, which defines a trajectory of heating up the system with constant cell voltage of 1.8 V.","schema:name":"2020-10-14_1st_Data-measured_Heat-up_1.8V_75C_15lpm_Low_Current_Densities.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2020-10-14_1st_Heat-up_1.8V_75C_15lpm_Low_Current_Densities","schema:version":5,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=21917","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/21917","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":9802456,"dvcore:storageIdentifier":"s3://juelich_data:194ac4be625-022c4298af0e","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"e57c0390ae49ff14846873b1f7628c065410008c72eeb32c3871f94815e3b917"}},{"schema:description":"The 100 kW Proton Exchange Membrane (PEM) electrolyzer is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the set-point profile, which defines a trajectory heating up the system with constant cell voltage of 1.8 V.","schema:name":"2020-10-14_1st_Setpoint-Profile_Heat-up_1.8V_75C_15lpm_Low_Current_Densities.xls","dvcore:restricted":false,"dvcore:directoryLabel":"2020-10-14_1st_Heat-up_1.8V_75C_15lpm_Low_Current_Densities","schema:version":3,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=21934","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/21934","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.ms-excel","dvcore:filesize":190464,"dvcore:storageIdentifier":"s3://juelich_data:194ac4be570-be2d3cd6e68b","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"2c2612ac74778e4f34b7f36831513cc4906cf04ca589c451f9209c8e74a6ed94"}},{"schema:description":"The system is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the corresponding measured data recorded during operation of the set-point profile, which defines a trajectory of heating up the system with constant cell voltage of 1.8 V. ","schema:name":"2020-10-14_2nd_Data_measured_Heat-up_1.8V_75C_15lpm_Low_Current_Densities_abort.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2020-10-14_2nd_Heat-up_1.8V_75C_15lpm_Low_Current_Densities_abort","schema:version":5,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=21958","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/21958","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":6548065,"dvcore:storageIdentifier":"s3://juelich_data:194ac4be715-03387b16206f","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"ad55d0a5ce75ea2a1d7b8343bc6c993195e4c71a9c18e30fc4ac0de584785b8c"}},{"schema:description":"The 100 kW Proton Exchange Membrane (PEM) electrolyzer is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the set-point profile, which defines a trajectory heating up the system with constant cell voltage of 1.8 V. ","schema:name":"2020-10-14_2nd_Setpoint-Profile_Heat-up_1.8V_75C_15lpm_Low_Current_Densities_abort.xls","dvcore:restricted":false,"dvcore:directoryLabel":"2020-10-14_2nd_Heat-up_1.8V_75C_15lpm_Low_Current_Densities_abort","schema:version":5,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22118","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22118","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.ms-excel","dvcore:filesize":190464,"dvcore:storageIdentifier":"s3://juelich_data:194ac4be673-711055fdabfb","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"9f0463b4685499144d8cdb5c6707eae026720bc5c05f93dd1ab1dfbfd954fe4a"}},{"schema:description":"The system is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the corresponding measured data recorded during operation of the set-point profile, which defines a trajectory of Kombi Current Step Response 10min. ","schema:name":"2020-10-15_1st_Data_measured_Kombi-Current-Step Response_10min_abort.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2020-10-15_1st_Kombi-Current-Step Response_10min_abort","schema:version":5,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=21983","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/21983","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":1572708,"dvcore:storageIdentifier":"s3://juelich_data:194ac4be784-c52841c36553","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"b387755145863a129525d2014d284774c7981b95f0b4ffa9b7a883d89a6a7167"}},{"schema:description":"The 100 kW Proton Exchange Membrane (PEM) electrolyzer is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the set-point profile, which defines a trajectory of a Kombi Current Step Response 10min executed through a predefined control sequence. ","schema:name":"2020-10-15_1st_Setpoint-Profile_Kombi-Current-Step Response_10min_abort.xls","dvcore:restricted":false,"dvcore:directoryLabel":"2020-10-15_1st_Kombi-Current-Step Response_10min_abort","schema:version":4,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22074","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22074","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.ms-excel","dvcore:filesize":196608,"dvcore:storageIdentifier":"s3://juelich_data:194ac4be74e-2f82ea62829d","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"df7edf896f3d8da46dffff776024134e82a297a57897cd99d93cd387a212d6ae"}},{"schema:description":"The system is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the corresponding measured data recorded during operation of the set-point profile, which defines a trajectory of Kombi Current Step Response 10min. ","schema:name":"2020-10-15_2nd_Data_measured_Kombi-Current-Step Response_10min.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2020-10-15_2nd_Kombi-Current-Step Response_10min","schema:version":4,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=21949","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/21949","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":6946407,"dvcore:storageIdentifier":"s3://juelich_data:194ac4be8a6-728103206739","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"13dd6090e38c0f8fe51cb5c6e286e61aeb2e595b1d32c4ff6fa09ed3924d2fc8"}},{"schema:description":"The 100 kW Proton Exchange Membrane (PEM) electrolyzer is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the set-point profile, which defines a trajectory of a Kombi Current Step Response 10min executed through a predefined control sequence. ","schema:name":"2020-10-15_2nd_Setpoint-Profile_Kombi-Current-Step Response_10min.xls","dvcore:restricted":false,"dvcore:directoryLabel":"2020-10-15_2nd_Kombi-Current-Step Response_10min","schema:version":4,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22057","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22057","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.ms-excel","dvcore:filesize":196608,"dvcore:storageIdentifier":"s3://juelich_data:194ac4be796-00cb345b0392","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"9209e164c011e79e154bdb907ef53e70560c0293a3887b8f427cab6af43b51a8"}},{"schema:description":"The system is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the corresponding measured data recorded during operation of the set-point profile, which defines a trajectory of Kombi Current Step Response 10min. ","schema:name":"2020-10-16_Data_measured_Kombi-Current-Step Response_10min.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2020-10-16_Kombi-Current-Step Response_10min","schema:version":3,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=21997","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/21997","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":14163219,"dvcore:storageIdentifier":"s3://juelich_data:194ac4be9f4-c3945f6ae2f1","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"0c381b58642ca92e5df15673b1393435e7ffa145ab1efae586be150c75b497aa"}},{"schema:description":"The 100 kW Proton Exchange Membrane (PEM) electrolyzer is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the set-point profile, which defines a trajectory of a Kombi Current Step Response 10min executed through a predefined control sequence. ","schema:name":"2020-10-16_Setpoint-Profile_Kombi-Current-Step Response_10min.xls","dvcore:restricted":false,"dvcore:directoryLabel":"2020-10-16_Kombi-Current-Step Response_10min","schema:version":3,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=21951","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/21951","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.ms-excel","dvcore:filesize":196608,"dvcore:storageIdentifier":"s3://juelich_data:194ac4be8e8-72ced8e39a1b","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"ab083c798bd7c2146b09385ad25f6d9b2766758889a72b9c6cbadac128353862"}},{"schema:description":"The data corresponds to the 100 kW Proton Exchange Membrane (PEM) electrolyzer. During this procedure, the load conditions were constant in order to determine the thermoneutral operation point","schema:name":"2020-10-20_Thermoneutral_Operation.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2020-10-20_Thermoneutral_Operation_Point","schema:version":2,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22113","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22113","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":14705185,"dvcore:storageIdentifier":"s3://juelich_data:194ac4beb71-a672c3e6ded4","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"25a2ec0d6db52cbf4cc4bb121256d0561458463ab0af7b7298c5dc9bc33b4ada"}},{"schema:description":"The data corresponds to the 100 kW Proton Exchange Membrane (PEM) electrolyzer. During this procedure, the load conditions were constant in order to determine the thermoneutral operation point","schema:name":"2020-10-21_Thermoneutral_Operation.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2020-10-21_Thermoneutral_Operation_Point","schema:version":2,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22010","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22010","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":15189956,"dvcore:storageIdentifier":"s3://juelich_data:194ac4bed73-17ffc56b9276","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"4c2ca16d88a2e8e03a069da6c5e2bbd7af2d83368e36b8d0fe97e4d9d933472c"}},{"schema:description":"The system is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the corresponding measured data recorded during operation of the set-point profile, which defines a trajectory of a Kombi-PV-Profile from the Project PHOEBUS. ","schema:name":"2020-11-03_Data_measured_Kombi-PV-Profile_PHOEBUS-1.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2020-11-03_Kombi-PV-Profile_PHOEBUS-1","schema:version":3,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=21932","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/21932","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":15019737,"dvcore:storageIdentifier":"s3://juelich_data:194ac4bef9f-d4b907401c5d","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"8aa8f2ae37e8f734cd1338e9c820e71b6e7966f0abef1143826771e194313888"}},{"schema:description":"The 100 kW Proton Exchange Membrane (PEM) electrolyzer is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the set-point profile, which defines a trajectory of a Kombi-PV-Profile from the Project PHOEBUS executed through a predefined control sequence. ","schema:name":"2020-11-03_Setpoint-Profile_Kombi-PV-Profile_PHOEBUS-1.xls","dvcore:restricted":false,"dvcore:directoryLabel":"2020-11-03_Kombi-PV-Profile_PHOEBUS-1","schema:version":4,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22116","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22116","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.ms-excel","dvcore:filesize":404480,"dvcore:storageIdentifier":"s3://juelich_data:194ac4bee23-f10b279d993a","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"88d0ad4f661bb133962286f06ab20afc4b9440393dbfd3d9ca602a8a2275ab23"}},{"schema:description":"The system is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the corresponding measured data recorded during operation of the set-point profile, which defines a trajectory of Kombi Current Step Response for 10min at 60 °C.","schema:name":"2020-11-04_Data_measured_Kombi-Current-Step Response_60C_10min.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2020-11-04_Kombi-Current-Step Response_60C_10min","schema:version":4,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=21897","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/21897","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":10746176,"dvcore:storageIdentifier":"s3://juelich_data:194ac4bf155-00f2f39505c6","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"f2dddbf7eafde2ceee4b5d117bc64630e9fd929802bae9f716fccbd89b130b60"}},{"schema:description":"The 100 kW Proton Exchange Membrane (PEM) electrolyzer is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the set-point profile, which defines a trajectory of a Kombi Current Step Response for 10min at 60 °C executed through a predefined control sequence.","schema:name":"2020-11-04_Setpoint-Profile_Kombi-Current-Step Response_60C_10min.xls","dvcore:restricted":false,"dvcore:directoryLabel":"2020-11-04_Kombi-Current-Step Response_60C_10min","schema:version":3,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22058","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22058","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.ms-excel","dvcore:filesize":193536,"dvcore:storageIdentifier":"s3://juelich_data:194ac4bf04d-c3581190617e","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"81aa1e78cfca15a0cf5ea4d352deef087d9f81855f1f442dc949b6ea4b19a9cc"}},{"schema:description":"The system is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the corresponding measured data recorded during operation of the set-point profile, which defines a trajectory of a Kombi-PV-Profile from the Project PHOEBUS.","schema:name":"2020-11-05_Data_measured_Kombi-PV-Profile_PHOEBUS-2.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2020-11-05_Kombi-PV-Profile_PHOEBUS-2","schema:version":2,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22089","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22089","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":16385527,"dvcore:storageIdentifier":"s3://juelich_data:194ac4bf8c2-7cba33c6284d","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"5abbe5cf763e02242209b1c81a5e7c701359b5643da1992615e32b530236ef7e"}},{"schema:description":"The 100 kW Proton Exchange Membrane (PEM) electrolyzer is operating under normal conditions, with all set-points defined by a PV-Profile originating from the PHOEBUS project and executed through a control sequence. This file contains the PV-Profile, which specifies the dynamic trajectory of operating points applied to the electrolyzer via the predefined control sequence.","schema:name":"2020-11-05_Setpoint-Profile_Kombi-PV-Profile_PHOEBUS-2.xls","dvcore:restricted":false,"dvcore:directoryLabel":"2020-11-05_Kombi-PV-Profile_PHOEBUS-2","schema:version":3,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=21970","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/21970","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.ms-excel","dvcore:filesize":278528,"dvcore:storageIdentifier":"s3://juelich_data:194ac4bf70a-83a9f6a3d337","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"d2373b275c0764d2b2a13bd2dc2f87761fca00630d12b0181f576c8ebdc10336"}},{"schema:description":"The system is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the corresponding measured data recorded during operation of the set-point profile, which defines a trajectory of Kombi Current Step Response for 1 h at 60 °C.","schema:name":"2020-11-06_Data_measured_Kombi-Current-Step Response_60min_1.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2020-11-06_Kombi-Current-Step Response_60min_1","schema:version":3,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=21875","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/21875","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":15388418,"dvcore:storageIdentifier":"s3://juelich_data:194ac4c02f2-2421f6838302","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"045f58095408eceeb41e5f8cabe294b06c376ca973f4bcd8f23ec4f58dc3df84"}},{"schema:description":"The 100 kW Proton Exchange Membrane (PEM) electrolyzer is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the set-point profile, which defines a trajectory of a Kombi Current Step Response for 1 h at 60 °C executed through a predefined control sequence.","schema:name":"2020-11-06_Setpoint-Profile_Kombi-Current-Step Response_60min_1.xls","dvcore:restricted":false,"dvcore:directoryLabel":"2020-11-06_Kombi-Current-Step Response_60min_1","schema:version":3,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22100","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22100","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.ms-excel","dvcore:filesize":187904,"dvcore:storageIdentifier":"s3://juelich_data:194ac4c01aa-480408716f0d","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"3701bd950a527377399054954dad0277181ab70ca6c0eee2bb1f051eed67ecc9"}},{"schema:description":"The system is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the corresponding measured data recorded during operation of the set-point profile, which defines a trajectory of Kombi Current Step Response for 1 h at 75 °C.","schema:name":"2020-11-09_Data_measured_Kombi-Current-Step Response_60min_2.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2020-11-09_Kombi-Current-Step Response_60min_2","schema:version":3,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22148","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22148","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":16032773,"dvcore:storageIdentifier":"s3://juelich_data:194ac4c0780-13048364a392","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"9c0b45f0c99613b27982b7a786a8bcf79d1012ed681aa5ff8503971c7780092b"}},{"schema:description":"The 100 kW Proton Exchange Membrane (PEM) electrolyzer is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the set-point profile, which defines a trajectory of a Kombi Current Step Response for 1 h at 75 °C executed through a predefined control sequence.","schema:name":"2020-11-09_Setpoint-Profile_Kombi-Current-Step Response_60min_2.xls","dvcore:restricted":false,"dvcore:directoryLabel":"2020-11-09_Kombi-Current-Step Response_60min_2","schema:version":3,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=21982","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/21982","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.ms-excel","dvcore:filesize":187904,"dvcore:storageIdentifier":"s3://juelich_data:194ac4c05b0-659c857429bd","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"cdc2b9933add2f3e0da1f42234273182b256d25c306f25106cd7fc8a83b9673d"}},{"schema:description":"The system is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the corresponding measured data recorded during operation of the set-point profile, which defines a trajectory of Kombi Current Step Response for 1 h at 75 °C.","schema:name":"2020-11-10_Data_measured_Kombi-Current-Step Response_60min_3.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2020-11-10_Kombi-Current-Step Response_60min_3","schema:version":2,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=21920","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/21920","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":15548191,"dvcore:storageIdentifier":"s3://juelich_data:194ac4c0ecf-3a29214948dc","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"97e93394f77966e7e6909952b9dccecb9342012979a4fd9b857a1f93b92f8785"}},{"schema:description":"The 100 kW Proton Exchange Membrane (PEM) electrolyzer is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the set-point profile, which defines a trajectory of a Kombi Current Step Response for 1 h at 75 °C executed through a predefined control sequence.","schema:name":"2020-11-10_Setpoint-Profile_Kombi-Current-Step Response_60min_3.xls","dvcore:restricted":false,"dvcore:directoryLabel":"2020-11-10_Kombi-Current-Step Response_60min_3","schema:version":2,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22025","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22025","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.ms-excel","dvcore:filesize":187904,"dvcore:storageIdentifier":"s3://juelich_data:194ac4c083b-fd46e998c942","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"1c230d534b86913d31d626384e51abb763b1aa44e9c792bc7abd056627c8369d"}},{"schema:description":"The system is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the corresponding measured data recorded during operation of the set-point profile, which defines a trajectory of Kombi Current Step Response for 1 h at 75 °C","schema:name":"2020-11-11_Data_measured_Kombi-Current-Step Response_60min_4.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2020-11-11_Kombi-Current-Step Response_60min_4","schema:version":2,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22021","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22021","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":15643693,"dvcore:storageIdentifier":"s3://juelich_data:194ac4c1784-5817f12e1de2","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"d087ec9dbb97430d4d22871c86ae162a2e4f83584f040e34e0c8635b66947973"}},{"schema:description":"The 100 kW Proton Exchange Membrane (PEM) electrolyzer is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the set-point profile, which defines a trajectory of a Kombi Current Step Response for 1 h at 75 °C executed through a predefined control sequence.","schema:name":"2020-11-11_Setpoint-Profile_Kombi-Current-Step Response_60min_4.xls","dvcore:restricted":false,"dvcore:directoryLabel":"2020-11-11_Kombi-Current-Step Response_60min_4","schema:version":2,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=21919","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/21919","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.ms-excel","dvcore:filesize":187904,"dvcore:storageIdentifier":"s3://juelich_data:194ac4c15b5-10e90d0b5f96","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"88fd07f09a422c22c02a0d68e526bc655d1d5aa1d636c06e9d13f6d348f94a15"}},{"schema:description":"The system is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the corresponding measured data recorded during operation of the set-point profile, which defines a trajectory of Kombi Current Step Response for 1 h at 75 °C.","schema:name":"2020-11-12_Data_measured_Kombi-Current-Step Response_60min_5.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2020-11-12_Kombi-Current-Step Response_60min_5","schema:version":2,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=21999","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/21999","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":16153358,"dvcore:storageIdentifier":"s3://juelich_data:194ac4c1d1e-ac29bf46254d","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"e8f77d81e611f7428c42022b9aaef415228acdf9f6cfc3618a8afa5e32ea0822"}},{"schema:description":"The 100 kW Proton Exchange Membrane (PEM) electrolyzer is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the set-point profile, which defines a trajectory of a Kombi Current Step Response for 1 h at 75 °C executed through a predefined control sequence.","schema:name":"2020-11-12_Setpoint-Profile_Kombi-Current-Step Response_60min_5.xls","dvcore:restricted":false,"dvcore:directoryLabel":"2020-11-12_Kombi-Current-Step Response_60min_5","schema:version":3,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=21938","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/21938","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.ms-excel","dvcore:filesize":187904,"dvcore:storageIdentifier":"s3://juelich_data:194ac4c1c0d-dbaa1ee321e9","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"fbb817c012add26a656f4b5d61d9fbde177818e426b5c2c88e0ed0e3b62aa7e2"}},{"schema:description":"The system is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the corresponding measured data recorded during operation of the set-point profile, which defines a trajectory of Kombi Current Step Response for 10min at 75 °C.","schema:name":"2020-11-13_Data_measured_Kombi-Current.Pump-Step Response_10min_2_1bar.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2020-11-13_Kombi-Current.Pump-Step Response_10min_2_1bar","schema:version":2,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=21912","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/21912","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":14425332,"dvcore:storageIdentifier":"s3://juelich_data:194ac4c2282-3ab83219d604","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"772e47718d5c1611807066ca33e658d7e07ea592edec3f773642c5c63e2b597a"}},{"schema:description":"The 100 kW Proton Exchange Membrane (PEM) electrolyzer is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the set-point profile, which defines a trajectory of a Kombi Current Step Response for 10min at 75 °C executed through a predefined control sequence.","schema:name":"2020-11-13_Setpoint-Profile_Kombi-Current+Pump-Step Response_10min_2_1bar.xls","dvcore:restricted":false,"dvcore:directoryLabel":"2020-11-13_Kombi-Current.Pump-Step Response_10min_2_1bar","schema:version":2,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=21907","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/21907","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.ms-excel","dvcore:filesize":203776,"dvcore:storageIdentifier":"s3://juelich_data:194ac4c20f1-f69ae2f1a849","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"0fcca53f40c50b866ba69e43b84ecb5f64de9c0bf94e2c070d8e655232132d91"}},{"schema:description":"The system is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the corresponding measured data recorded during operation of the set-point profile, which defines a trajectory of Kombi Current Step Response for 1 h at 65 °C.","schema:name":"2020-11-16_Data_measured_Kombi-Current-Step Response_65.C_60min_1.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2020-11-16_Kombi-Current-Step Response_65.C_60min_1","schema:version":2,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=21991","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/21991","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":14774676,"dvcore:storageIdentifier":"s3://juelich_data:194ac4c2a9c-576e74b88c36","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"64b32677fe7b9a960065f4c88ff7a5239b996cae55ad18fc1bcd6be1cba4e4c8"}},{"schema:description":"The 100 kW Proton Exchange Membrane (PEM) electrolyzer is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the set-point profile, which defines a trajectory of a Kombi Current Step Response for 1 h at 65 °C executed through a predefined control sequence.","schema:name":"2020-11-16_Setpoint-Profile_Kombi-Current-Step Response_65°C_60min_1.xls","dvcore:restricted":false,"dvcore:directoryLabel":"2020-11-16_Kombi-Current-Step Response_65.C_60min_1","schema:version":2,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22119","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22119","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.ms-excel","dvcore:filesize":187904,"dvcore:storageIdentifier":"s3://juelich_data:194ac4c2915-2a0d479e0b56","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"bb20e2c60a94f5f5f42de4122a835fe61b0fbdabd0f33f03eb91b6c429d47464"}},{"schema:description":"The system is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the corresponding measured data recorded during operation of the set-point profile, which defines a trajectory of Kombi Current Step Response for 1 h at 65 °C.","schema:name":"2020-11-18_Data_measured_Kombi-Current-Step Response_65.C_60min_2.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2020-11-18_Kombi-Current-Step Response_65.C_60min_2","schema:version":2,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=21971","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/21971","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":15127263,"dvcore:storageIdentifier":"s3://juelich_data:194ac4c32f7-abec6579751e","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"89c7c86a0216c0bd5f034c0d671b8667ad3b4c6775d48690339c0b230ef8e9f1"}},{"schema:description":"The 100 kW Proton Exchange Membrane (PEM) electrolyzer is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the set-point profile, which defines a trajectory of a Kombi Current Step Response for 1 h at 65 °C executed through a predefined control sequence.","schema:name":"2020-11-18_Setpoint-Profile_Kombi-Current-Step Response_65°C_60min_2.xls","dvcore:restricted":false,"dvcore:directoryLabel":"2020-11-18_Kombi-Current-Step Response_65.C_60min_2","schema:version":2,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22041","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22041","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.ms-excel","dvcore:filesize":187904,"dvcore:storageIdentifier":"s3://juelich_data:194ac4c31cd-a5cf0187c37e","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"6dd0153058d0aae9382345002a5f18311cb2a629f5254b67f82bb5165e20eacc"}},{"schema:description":"The system is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the corresponding measured data recorded during operation of the set-point profile, which defines a trajectory of Kombi Current Step Response for 1 h at 65 °C.","schema:name":"2020-11-19_Data_measured_Kombi-Current-Step Response_65.C_60min_3.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2020-11-19_Kombi-Current-Step Response_65.C_60min_3","schema:version":2,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=21894","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/21894","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":15147839,"dvcore:storageIdentifier":"s3://juelich_data:194ac4c3949-53a7addcc80a","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"7494694831236d485b9a218c68abad9a2fe8bc99ef541092d1427d0bce64ac1b"}},{"schema:description":"The 100 kW Proton Exchange Membrane (PEM) electrolyzer is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the set-point profile, which defines a trajectory of a Kombi Current Step Response for 1 h at 65 °C executed through a predefined control sequence.","schema:name":"2020-11-19_Setpoint-Profile_Kombi-Current-Step Response_65°C_60min_3.xls","dvcore:restricted":false,"dvcore:directoryLabel":"2020-11-19_Kombi-Current-Step Response_65.C_60min_3","schema:version":2,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22117","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22117","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.ms-excel","dvcore:filesize":187904,"dvcore:storageIdentifier":"s3://juelich_data:194ac4c3831-1605c99f6662","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"bd3fd63ed0a030c91c4f488d6ec6051f08ffd673a945394f2a27b4efb383ea61"}},{"schema:description":"The system is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the corresponding measured data recorded during operation of the set-point profile, which defines a trajectory of Kombi Current Step Response for 1 h at 65 °C.","schema:name":"2020-11-23_Data_measured_Kombi-Current-Step Response_65.C_60min_4.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2020-11-23_Kombi-Current-Step Response_65.C_60min_4","schema:version":2,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=21922","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/21922","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":14180714,"dvcore:storageIdentifier":"s3://juelich_data:194ac4c3b69-aa90f8ce256e","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"5a376eb4ca618932ff230ef5f0b630879e92870ead6fe08e14e090690b48e47e"}},{"schema:description":"The 100 kW Proton Exchange Membrane (PEM) electrolyzer is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the set-point profile, which defines a trajectory of a Kombi Current Step Response for 1 h at 65 °C executed through a predefined control sequence.","schema:name":"2020-11-23_Setpoint-Profile_Kombi-Current-Step Response_65°C_60min_4.xls","dvcore:restricted":false,"dvcore:directoryLabel":"2020-11-23_Kombi-Current-Step Response_65.C_60min_4","schema:version":2,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22151","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22151","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.ms-excel","dvcore:filesize":187904,"dvcore:storageIdentifier":"s3://juelich_data:194ac4c3a15-06682e4f51d5","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"60d7180cb69c7318ff7801047cc0ed8ffe9852afc7ba7551bf062f79f44e02d7"}},{"schema:description":"The data corresponds to the 100 kW Proton Exchange Membrane (PEM) electrolyzer. During this procedure, the load conditions were constant in order to determine the thermoneutral operation point ","schema:name":"2020-12-08_Thermoneutral Operation_5-4bar_0.8 Acm-2.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2020-12-08_Thermoneutral Operation_5-4bar_0.8 Acm-2","schema:version":3,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=21927","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/21927","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":8163227,"dvcore:storageIdentifier":"s3://juelich_data:194ac4c3f43-ce76fa409533","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"be608c668805ded231acebc696dfba00a489e9f71da8dadea765d498ada8b357"}},{"schema:description":"The system is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the corresponding measured data recorded during operation of the set-point profile, which defines a trajectory of Kombi Current Step Response for 1 h at 55 °C.","schema:name":"2020-12-09_Data_measured_Kombi-Current-Step Response_55.C_60min_1.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2020-12-09_Kombi-Current-Step Response_55.C_60min_1","schema:version":2,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22026","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22026","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":15461141,"dvcore:storageIdentifier":"s3://juelich_data:194ac4c472a-4bc8d57a0e33","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"8807201b7125836535f9d1c6dc32c7f0b5575c4eb46d51a2f523a7b6edbcce2d"}},{"schema:description":"The 100 kW Proton Exchange Membrane (PEM) electrolyzer is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the set-point profile, which defines a trajectory of a Kombi Current Step Response for 1 h at 55 °C executed through a predefined control sequence.","schema:name":"2020-12-09_Setpoint-Profile_Kombi-Current-Step Response_55°C_60min_1.xls","dvcore:restricted":false,"dvcore:directoryLabel":"2020-12-09_Kombi-Current-Step Response_55.C_60min_1","schema:version":2,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22114","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22114","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.ms-excel","dvcore:filesize":187904,"dvcore:storageIdentifier":"s3://juelich_data:194ac4c4557-766981ec65ba","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"97a7969291787e2c69199e6e3398647ecdd41a4ca608f93e4f6c7412baddafe3"}},{"schema:description":"The system is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the corresponding measured data recorded during operation of the set-point profile, which defines a trajectory of Kombi Current Step Response for 1 h at 45 °C.","schema:name":"2020-12-10_Data_measured_Kombi-Current-Step Response_45.C_60min_1.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2020-12-10_Kombi-Current-Step Response_45.C_60min_1","schema:version":3,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22138","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22138","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":6512736,"dvcore:storageIdentifier":"s3://juelich_data:194ac4c4aec-ff8b6c04c6b6","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"242e996271154275fae64c7a3f26a5d2d259cd6189bc06439ffddb8c39f14611"}},{"schema:description":"The 100 kW Proton Exchange Membrane (PEM) electrolyzer is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the set-point profile, which defines a trajectory of a Kombi Current Step Response for 1 h at 45 °C executed through a predefined control sequence.","schema:name":"2020-12-10_Setpoint-Profile_Kombi-Current-Step Response_45°C_60min_1.xls","dvcore:restricted":false,"dvcore:directoryLabel":"2020-12-10_Kombi-Current-Step Response_45.C_60min_1","schema:version":2,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=21885","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/21885","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.ms-excel","dvcore:filesize":187904,"dvcore:storageIdentifier":"s3://juelich_data:194ac4c49b6-af4f8745c968","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"cf75fecba48c50631891c9a11f90778cfa5811382c12885648ec6f019411ae52"}},{"schema:description":"The system is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the corresponding measured data recorded during operation of the set-point profile, which defines a trajectory of Kombi Current Step Response for 1 h at 45 °C.","schema:name":"2020-12-11_Data_measured_Kombi-Current-Step Response_45.C_60min_1-2.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2020-12-11_Kombi-Current-Step Response_45.C_60min_1-2","schema:version":2,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22062","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22062","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":14381728,"dvcore:storageIdentifier":"s3://juelich_data:194ac4c52ea-d84d402d0483","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"ab329852df069a95d43bb49b5784292c650c2f3624e38adcc988d80215b7421e"}},{"schema:description":"The 100 kW Proton Exchange Membrane (PEM) electrolyzer is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the set-point profile, which defines a trajectory of a Kombi Current Step Response for 1 h at 45 °C executed through a predefined control sequence.","schema:name":"2020-12-11_Setpoint-Profile_Kombi-Current-Step Response_45°C_60min_1-2.xls","dvcore:restricted":false,"dvcore:directoryLabel":"2020-12-11_Kombi-Current-Step Response_45.C_60min_1-2","schema:version":2,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=21930","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/21930","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.ms-excel","dvcore:filesize":187904,"dvcore:storageIdentifier":"s3://juelich_data:194ac4c51b2-7eaf8845f50b","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"09248ce96e6f881eb4e3cb88e350581daf96acf7389c24da0937cf7fa861b6ea"}},{"schema:description":"The system is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the corresponding measured data recorded during operation of the set-point profile, which defines a trajectory of Kombi Current Step Response for 1 h at 35 °C.","schema:name":"2020-12-14_Data_measured_Kombi-Current-Step Response_35.C_60min_1.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2020-12-14_Kombi-Current-Step Response_35.C_60min_1","schema:version":2,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22067","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22067","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":13883835,"dvcore:storageIdentifier":"s3://juelich_data:194ac4c54fd-b4182fcd9693","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"bf5c0594a338b53b1d7467052ed0d0de99516635f9ba4f1e5f7085e26b7aae95"}},{"schema:description":"The 100 kW Proton Exchange Membrane (PEM) electrolyzer is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the set-point profile, which defines a trajectory of a Kombi Current Step Response for 1 h at 35 °C executed through a predefined control sequence.","schema:name":"2020-12-14_Setpoint-Profile_Kombi-Current-Step Response_35°C_60min_1.xls","dvcore:restricted":false,"dvcore:directoryLabel":"2020-12-14_Kombi-Current-Step Response_35.C_60min_1","schema:version":2,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22126","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22126","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.ms-excel","dvcore:filesize":188416,"dvcore:storageIdentifier":"s3://juelich_data:194ac4c5357-1898929cb4d8","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"91568da563a7c6aed845831ba7eed1f31ff48ae06d8bcc14c4e1389c3ed76b66"}},{"schema:description":"The system is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the corresponding measured data recorded during operation of the set-point profile, which defines a trajectory of a high dynamic Current Step Response at 75 °C.","schema:name":"2020-12-15_Data_measured_Kombi-Current-Step Response_HighlyDynamic.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2020-12-15_Kombi-Current-Step Response_HighlyDynamic","schema:version":2,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=21973","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/21973","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":14818878,"dvcore:storageIdentifier":"s3://juelich_data:194ac4c5671-cbabd9f60ccf","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"91ef80b2a20efd2bdc84b2ffa9e70f4d615259ca35cdcf494322d277f5dbed51"}},{"schema:description":"The 100 kW Proton Exchange Membrane (PEM) electrolyzer is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the set-point profile, which defines a trajectory of a high dynamic Current Step Response at 75 °C executed through a predefined control sequence.","schema:name":"2020-12-15_Setpoint-Profile_Kombi-Current-Step Response_HighlyDynamic.xls","dvcore:restricted":false,"dvcore:directoryLabel":"2020-12-15_Kombi-Current-Step Response_HighlyDynamic","schema:version":4,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=21946","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/21946","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.ms-excel","dvcore:filesize":247808,"dvcore:storageIdentifier":"s3://juelich_data:194ac4c556a-c98ce2c98d65","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"5af98d35cd18986bb46ec86d5fe1be4cd0ae26e2cb351e527804ec1b4d68a418"}},{"schema:description":"The system is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the corresponding measured data recorded during operation of the set-point profile, which defines a trajectory of Kombi Current Step Response for 1 h at 55 °C.","schema:name":"2021-01-11_Data_measured_Kombi-Current-Step Response_55.C_60min_2.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2021-01-11_Kombi-Current-Step Response_55.C_60min_2","schema:version":2,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22053","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22053","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":14528990,"dvcore:storageIdentifier":"s3://juelich_data:194ac4c5bd7-77859763ae8b","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"4e8ea190b8fda203b217a4b0d49bea7ba08c442cbfb207b865732c276586fd32"}},{"schema:description":"The 100 kW Proton Exchange Membrane (PEM) electrolyzer is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the set-point profile, which defines a trajectory of a Kombi Current Step Response for 1 h at 55 °C executed through a predefined control sequence.","schema:name":"2021-01-11_Setpoint-Profile_Kombi-Current-Step Response_55°C_60min_2.xls","dvcore:restricted":false,"dvcore:directoryLabel":"2021-01-11_Kombi-Current-Step Response_55.C_60min_2","schema:version":2,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22018","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22018","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.ms-excel","dvcore:filesize":187904,"dvcore:storageIdentifier":"s3://juelich_data:194ac4c5ad0-337c74bdb6a2","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"483f224324dbcb70de9c7e22a8abaf56bd1cf4303bebc086f4734defacbc6a9d"}},{"schema:description":"The system is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the corresponding measured data recorded during operation of the set-point profile, which defines a trajectory of Kombi Current Step Response for 1 h at 45 °C.","schema:name":"2021-01-12_Data_measured_Kombi-Current-Step Response_45.C_60min_3.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2021-01-12_Kombi-Current-Step Response_45.C_60min_3","schema:version":2,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22030","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22030","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":13537128,"dvcore:storageIdentifier":"s3://juelich_data:194ac4c621a-8e05f6e1e8f9","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"f19c9c0a68d6c61af25a671629628b376f04a2673a353d99d015025323a22a5b"}},{"schema:description":"The 100 kW Proton Exchange Membrane (PEM) electrolyzer is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the set-point profile, which defines a trajectory of a Kombi Current Step Response for 1 h at 45 °C executed through a predefined control sequence.","schema:name":"2021-01-12_Setpoint-Profile_Kombi-Current-Step Response_45°C_60min_3.xls","dvcore:restricted":false,"dvcore:directoryLabel":"2021-01-12_Kombi-Current-Step Response_45.C_60min_3","schema:version":2,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=21903","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/21903","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.ms-excel","dvcore:filesize":187904,"dvcore:storageIdentifier":"s3://juelich_data:194ac4c60bc-4b12ef7ed43a","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"60f829941ee0894d48931fc4ccad3de194069835fb96c86e71fe4b5868eb21e5"}},{"schema:description":"The system is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the corresponding measured data recorded during operation of the set-point profile, which defines a trajectory of Kombi Current Step Response for 1 h at 45 °C.","schema:name":"2021-01-13_Data_measured_Kombi-Current-Step Response_45.C_60min_4.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2021-01-13_Kombi-Current-Step Response_45.C_60min_4","schema:version":2,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22127","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22127","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":14449157,"dvcore:storageIdentifier":"s3://juelich_data:194ac4c68dc-3de80f89176b","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"9d6c95476127abfb384fd448b98125c27a83dd7178fa8828cc1684d16c04a528"}},{"schema:description":"The 100 kW Proton Exchange Membrane (PEM) electrolyzer is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the set-point profile, which defines a trajectory of a Kombi Current Step Response for 1 h at 45 °C executed through a predefined control sequence.","schema:name":"2021-01-13_Setpoint-Profile_Kombi-Current-Step Response_45°C_60min_4.xls","dvcore:restricted":false,"dvcore:directoryLabel":"2021-01-13_Kombi-Current-Step Response_45.C_60min_4","schema:version":2,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=21921","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/21921","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.ms-excel","dvcore:filesize":187904,"dvcore:storageIdentifier":"s3://juelich_data:194ac4c679a-b5188d10343c","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"a36d077bfa0df5ee0958286f0994fb74d56aae612db6a5edf75f5a93084556fb"}},{"schema:description":"The system is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the corresponding measured data recorded during operation of the set-point profile, which defines a trajectory of Kombi Current Step Response for 1 h at 55 °C.","schema:name":"2021-01-14_Data_measured_Kombi-Current-Step Response_55.C_60min_3.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2021-01-14_Kombi-Current-Step Response_55.C_60min_3","schema:version":2,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22124","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22124","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":15190375,"dvcore:storageIdentifier":"s3://juelich_data:194ac4c6e11-d82d4fd47661","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"33143b6be606ef13be8020f875d5ce51dc78115b80ee7eb3441baf98a13cf8fd"}},{"schema:description":"The 100 kW Proton Exchange Membrane (PEM) electrolyzer is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the set-point profile, which defines a trajectory of a Kombi Current Step Response for 1 h at 55 °C executed through a predefined control sequence.","schema:name":"2021-01-14_Setpoint-Profile_Kombi-Current-Step Response_55°C_60min_3.xls","dvcore:restricted":false,"dvcore:directoryLabel":"2021-01-14_Kombi-Current-Step Response_55.C_60min_3","schema:version":2,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22071","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22071","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.ms-excel","dvcore:filesize":187904,"dvcore:storageIdentifier":"s3://juelich_data:194ac4c6d12-82e0d0d66cae","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"73aa710206bbda5c298f87b6455d0f37b8eff65f423a1df104eca4939041c6ef"}},{"schema:description":"The system is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the corresponding measured data recorded during operation of the set-point profile, which defines a trajectory of Kombi Current Step Response for 1 h at 35 °C.","schema:name":"2021-01-15_Data_measured_Kombi-Current-Step Response_35.C_60min_2.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2021-01-15_Kombi-Current-Step Response_35.C_60min_2","schema:version":2,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=21931","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/21931","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":13873260,"dvcore:storageIdentifier":"s3://juelich_data:194ac4c7482-284971bdd7e7","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"86578448e9e048d9277cd0c2d7c6af7a7721dfa66244d12c2ccce6c711ea1b6f"}},{"schema:description":"The 100 kW Proton Exchange Membrane (PEM) electrolyzer is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the set-point profile, which defines a trajectory of a Kombi Current Step Response for 1 h at 35 °C executed through a predefined control sequence.","schema:name":"2021-01-15_Setpoint-Profile_Kombi-Current-Step Response_35°C_60min_2.xls","dvcore:restricted":false,"dvcore:directoryLabel":"2021-01-15_Kombi-Current-Step Response_35.C_60min_2","schema:version":2,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22015","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22015","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.ms-excel","dvcore:filesize":187904,"dvcore:storageIdentifier":"s3://juelich_data:194ac4c7341-6dfa6cc69c0a","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"c7701cb32464f9f601256eff83d7bab36b1eb662ad83d5de8944bf0b18894bd2"}},{"schema:description":"The system is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the corresponding measured data recorded during operation of the set-point profile, which defines a trajectory of Kombi Current Step Response for 1 h at 25 °C.","schema:name":"2021-01-18_Data_measured_Kombi-Current-Step Response_25.C_60min_1.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2021-01-18_Kombi-Current-Step Response_25.C_60min_1","schema:version":2,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22103","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22103","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":15789320,"dvcore:storageIdentifier":"s3://juelich_data:194ac4c7b9a-a46c9c5ffa7a","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"c33c0b871e6fac1e623bfe16be65c1fc978e88697ccfaa83e781f2723f46194a"}},{"schema:description":"The 100 kW Proton Exchange Membrane (PEM) electrolyzer is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the set-point profile, which defines a trajectory of a Kombi Current Step Response for 1 h at 25 °C executed through a predefined control sequence.","schema:name":"2021-01-18_Setpoint-Profile_Kombi-Current-Step Response_25°C_60min_1.xls","dvcore:restricted":false,"dvcore:directoryLabel":"2021-01-18_Kombi-Current-Step Response_25.C_60min_1","schema:version":2,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22102","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22102","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.ms-excel","dvcore:filesize":188416,"dvcore:storageIdentifier":"s3://juelich_data:194ac4c7a37-65d7520e06b0","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"b0a73540c43d2f2d5570f317d71fc083c8daaebdcc4eb023e888b41fa77d88de"}},{"schema:description":"The system is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the corresponding measured data recorded during operation of the set-point profile, which defines a trajectory of Kombi Current Step Response for 1 h at 35 - 55 °C.","schema:name":"2021-01-19_Data_measured_Kombi-Current-Step Response_35-55.C_60min_1.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2021-01-19_Kombi-Current-Step Response_35-55.C_60min_1","schema:version":2,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22160","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22160","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":16886007,"dvcore:storageIdentifier":"s3://juelich_data:194ac4c81df-f31d764d093a","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"671678c9c514fb45f010a4b92519c88d658e2418031b2babe9cfb7192385e32f"}},{"schema:description":"The 100 kW Proton Exchange Membrane (PEM) electrolyzer is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the set-point profile, which defines a trajectory of a Kombi Current Step Response for 1 h at 35 -55 °C executed through a predefined control sequence.","schema:name":"2021-01-19_Setpoint-Profile_Kombi-Current-Step Response_35-55°C_60min_1.xls","dvcore:restricted":false,"dvcore:directoryLabel":"2021-01-19_Kombi-Current-Step Response_35-55.C_60min_1","schema:version":2,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22050","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22050","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.ms-excel","dvcore:filesize":189440,"dvcore:storageIdentifier":"s3://juelich_data:194ac4c806f-d912e6c7fa8c","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"1dc8391b15cc9dd6d3f5939f802c0e8e36e3bb3df7fb772443c7f24e2055bf67"}},{"schema:description":"The system is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the corresponding measured data recorded during operation of the set-point profile, which defines a trajectory of a wind turbine 300 min.","schema:name":"2021-01-20_Data_measured_Kombi-Current-Wind Power_300min_2.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2021-01-20_Kombi-Current-Wind Power_300min_2","schema:version":2,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22008","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22008","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":12758365,"dvcore:storageIdentifier":"s3://juelich_data:194ac4c870e-a933c90e3814","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"a760eddce045046ce589652f60d6076e5ac58332ecdc8aa50218311923d0c936"}},{"schema:description":"The 100 kW Proton Exchange Membrane (PEM) electrolyzer is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the set-point profile, which defines a trajectory of a wind turbine 300 min executed through a predefined control sequence.","schema:name":"2021-01-20_Setpoint-Profile_Kombi-Current-Wind Power_300min_2.xls","dvcore:restricted":false,"dvcore:directoryLabel":"2021-01-20_Kombi-Current-Wind Power_300min_2","schema:version":3,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=21984","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/21984","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.ms-excel","dvcore:filesize":6509568,"dvcore:storageIdentifier":"s3://juelich_data:194ac4c85b0-281ad28f63f0","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"8d00910c387d03e3d785be0175b089dff2f9fa28e0f13ca49d464b4d1d0d9b71"}},{"schema:description":"The system is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the corresponding measured data recorded during operation of the set-point profile, which defines a trajectory of a Kombi-PV-Profile from the Project PHOEBUS.","schema:name":"2021-01-21_Data_measured_Kombi-PV-Profile_PHOEBUS-3.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2021-01-21_Kombi-PV-Profile_PHOEBUS-3","schema:version":2,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22072","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22072","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":15904021,"dvcore:storageIdentifier":"s3://juelich_data:194ac4c8f0f-399dfc5058df","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"8e9247d3bf2cfb3682cd9472fd37929518934fe000383b75f0d1561744d60eac"}},{"schema:description":"The 100 kW Proton Exchange Membrane (PEM) electrolyzer is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the set-point profile, which defines a trajectory of a Kombi-PV-Profile from the Project PHOEBUS executed through a predefined control sequence","schema:name":"2021-01-21_Setpoint-Profile_Kombi-PV-Profile_PHOEBUS-3.xls","dvcore:restricted":false,"dvcore:directoryLabel":"2021-01-21_Kombi-PV-Profile_PHOEBUS-3","schema:version":2,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22020","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22020","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.ms-excel","dvcore:filesize":298496,"dvcore:storageIdentifier":"s3://juelich_data:194ac4c8d71-0ed1ecff7083","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"db079be12a6ab2c7f385c718a3c6b6af8724ee8d6c4a3112087de337819d8936"}},{"schema:description":"The system is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the corresponding measured data recorded during operation of the set-point profile, which defines a trajectory of a Kombi-PV-Profile from the Project PHOEBUS.","schema:name":"2021-01-22_Data_measured_Kombi-PV-Profile_PHOEBUS-4.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2021-01-22_Kombi-PV-Profile_PHOEBUS-4","schema:version":2,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22075","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22075","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":15860561,"dvcore:storageIdentifier":"s3://juelich_data:194ac4c9570-8f7e2412e5bf","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"03bcb7ad6b0a138bbf2636e6a135796fc331f6585c40b8bd781885bb72e7fcc2"}},{"schema:description":"The 100 kW Proton Exchange Membrane (PEM) electrolyzer is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the set-point profile, which defines a trajectory of a Kombi-PV-Profile from the Project PHOEBUS executed through a predefined control sequence","schema:name":"2021-01-22_Setpoint-Profile_Kombi-PV-Profile_PHOEBUS-4.xls","dvcore:restricted":false,"dvcore:directoryLabel":"2021-01-22_Kombi-PV-Profile_PHOEBUS-4","schema:version":2,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22093","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22093","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.ms-excel","dvcore:filesize":292352,"dvcore:storageIdentifier":"s3://juelich_data:194ac4c937d-8ff0dfc6caec","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"729cc9bb2d60ae41d25061393534ab482f93c112a76bf83714fb235921829a1b"}},{"schema:description":"The system is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the corresponding measured data recorded during operation of the set-point profile, which defines a trajectory of Kombi Current Step Response for 1min at 75 °C.","schema:name":"2021-01-26_Data_measured_Kombi-Current-Step Response_10min_2-3bar.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2021-01-26_Kombi-Current-Step Response_10min_2-3bar","schema:version":2,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22115","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22115","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":15622948,"dvcore:storageIdentifier":"s3://juelich_data:194ac4c97c1-b4f368ae420a","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"250edd4603c94482ceff111bd2f2c5de5087edc69c52b7b0b15240d7ddc98989"}},{"schema:description":"The 100 kW Proton Exchange Membrane (PEM) electrolyzer is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the set-point profile, which defines a trajectory of a Kombi Current Step Response for 10 min at 75 °C executed through a predefined control sequence.","schema:name":"2021-01-26_Setpoint-Profile_Kombi-Current-Step Response_10min_2-3bar.xls","dvcore:restricted":false,"dvcore:directoryLabel":"2021-01-26_Kombi-Current-Step Response_10min_2-3bar","schema:version":2,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=21935","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/21935","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.ms-excel","dvcore:filesize":196096,"dvcore:storageIdentifier":"s3://juelich_data:194ac4c9627-ba3cdf0ea49f","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"f5ceaccc71405a74c960c226a34365fe2643bf15f723bf46dc77eb58b05420f9"}},{"schema:description":"The system is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the corresponding measured data recorded during operation of the set-point profile, which defines a trajectory of Kombi Current Step Response for 5 min at 75 °C.","schema:name":"2021-01-27_1st_Data_measured_Kombi-Current-Step Response_75.C_5min.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2021-01-27_1st_Kombi-Current-Step Response_75.C_5min","schema:version":4,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=21956","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/21956","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":5211113,"dvcore:storageIdentifier":"s3://juelich_data:194ac4c9913-61c9064fc6d9","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"34fff28e46c196ed669c3ef627a3247a62abf1e4db3a30c1255d1ed63d3c799e"}},{"schema:description":"The 100 kW Proton Exchange Membrane (PEM) electrolyzer is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the set-point profile, which defines a trajectory of a Kombi Current Step Response for 5 min at 75 °C executed through a predefined control sequence.","schema:name":"2021-01-27_1st_Setpoint-Profile_Kombi-Current-Step Response_75.C_5min.xls","dvcore:restricted":false,"dvcore:directoryLabel":"2021-01-27_1st_Kombi-Current-Step Response_75.C_5min","schema:version":3,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=21914","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/21914","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.ms-excel","dvcore:filesize":212480,"dvcore:storageIdentifier":"s3://juelich_data:194ac4c9876-8aaa6442a8d9","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"8dced6487f2e39322193d50139c65a0d3baef12ee0b609fb9072491bff29da28"}},{"schema:description":"The system is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the corresponding measured data recorded during operation of the set-point profile, which defines a trajectory of Kombi Current Step Response for 5 min at 75 °C.","schema:name":"2021-01-27_2nd_Data_measured_Kombi-Current-Step Response_75.C_5min.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2021-01-27_2nd_Kombi-Current-Step Response_75.C_5min","schema:version":4,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=21957","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/21957","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":3701850,"dvcore:storageIdentifier":"s3://juelich_data:194ac4c99cc-b0503ae84eaa","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"362f3f97fb3c21643363be3540b7caea16afba07e6e2ca4139dcc13493421e3f"}},{"schema:description":"The 100 kW Proton Exchange Membrane (PEM) electrolyzer is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the set-point profile, which defines a trajectory of a Kombi Current Step Response for 5 min at 75 °C executed through a predefined control sequence.","schema:name":"2021-01-27_2nd_Setpoint-Profile_Kombi-Current-Step Response_75°C_5min.xls","dvcore:restricted":false,"dvcore:directoryLabel":"2021-01-27_2nd_Kombi-Current-Step Response_75.C_5min","schema:version":3,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22048","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22048","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.ms-excel","dvcore:filesize":210944,"dvcore:storageIdentifier":"s3://juelich_data:194ac4c9954-ddced33ea3c8","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"a4718f0c88b1958b3394baedcd13996a60f0d4a8044b137201fccc95b779df5c"}},{"schema:description":"The system is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the corresponding measured data recorded during operation of the set-point profile, which defines a trajectory of Kombi Current Step Response for 10 min at 75 °C on a single stack.","schema:name":"2021-01-28_Data_measured_Kombi-Current-Step Response_10min_Single-Stack.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2021-01-28_Kombi-Current-Step Response_10min_Single-Stack","schema:version":2,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=21987","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/21987","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":13895957,"dvcore:storageIdentifier":"s3://juelich_data:194ac4c9b54-2a4aae103c0a","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"6af704eecd51bf5257edbab24e44b401b2e99fd045b1767222f1254d98f5283c"}},{"schema:description":"The 100 kW Proton Exchange Membrane (PEM) electrolyzer is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the set-point profile, which defines a trajectory of a Kombi Current Step Response for 10 min at 65 °C executed through a predefined control sequence on a single stack.","schema:name":"2021-01-28_Setpoint-Profile_Kombi-Current-Step Response_10min_Single-Stack.xls","dvcore:restricted":false,"dvcore:directoryLabel":"2021-01-28_Kombi-Current-Step Response_10min_Single-Stack","schema:version":2,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22043","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22043","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.ms-excel","dvcore:filesize":193536,"dvcore:storageIdentifier":"s3://juelich_data:194ac4c99fd-fee4626cf9cd","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"d439f180f1bbfb39fab34c4857dfcaf84637e42891275c41e0cd6ddfbd47f7bb"}},{"schema:description":"The system is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the corresponding measured data recorded during operation of the set-point profile, which defines a trajectory of Kombi Current Step Response for 10 min at 75 °C.","schema:name":"2021-02-10_1st_Data_measured_Kombi-Current-Step Response_10min_varPump.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2021-02-10_1st_Kombi-Current-Step Response_10min_varPump","schema:version":2,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22085","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22085","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":4604380,"dvcore:storageIdentifier":"s3://juelich_data:194ac4c9d39-8683eb36139d","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"2930dd154a9ccedbbd765e2bad2ff9b292b8b7ebd6e652d172d318bf3d4496ea"}},{"schema:description":"The 100 kW Proton Exchange Membrane (PEM) electrolyzer is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the set-point profile, which defines a trajectory of a Kombi Current Step Response for 10 min at 75 °C executed through a predefined control sequence.","schema:name":"2021-02-10_1st_Setpoint-Profile_Kombi-Current-Step Response_10min_varPump.xls","dvcore:restricted":false,"dvcore:directoryLabel":"2021-02-10_1st_Kombi-Current-Step Response_10min_varPump","schema:version":3,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22132","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22132","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.ms-excel","dvcore:filesize":200192,"dvcore:storageIdentifier":"s3://juelich_data:194ac4c9bf5-f92b1afd0e5a","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"5484f56b32861c92b579dd5d80cf47bd41808c18580826b5cadbf2fd1634b2a7"}},{"schema:description":"The system is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the corresponding measured data recorded during operation of the set-point profile, which defines a trajectory of Kombi Current Step Response for 10 min at 75 °C.","schema:name":"2021-02-10_2nd_Data_measured_Kombi-Current-Step Response_10min_varPump.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2021-02-10_2nd_Kombi-Current-Step Response_10min_varPump","schema:version":2,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22136","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22136","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":11575623,"dvcore:storageIdentifier":"s3://juelich_data:194ac4c9ea5-67605354ef6d","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"1070d3c2e0119940ad322137d26511ee862281f9ff6fff5e4331f15b6a44d514"}},{"schema:description":"The 100 kW Proton Exchange Membrane (PEM) electrolyzer is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the set-point profile, which defines a trajectory of a Kombi Current Step Response for 10 min at 75 °C executed through a predefined control sequence.","schema:name":"2021-02-10_2nd_Setpoint-Profile_Kombi-Current-Step Response_10min_varPump.xls","dvcore:restricted":false,"dvcore:directoryLabel":"2021-02-10_2nd_Kombi-Current-Step Response_10min_varPump","schema:version":2,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22044","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22044","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.ms-excel","dvcore:filesize":200704,"dvcore:storageIdentifier":"s3://juelich_data:194ac4c9d8d-1acffae61694","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"b6545673aa0c2b10f3bca513d2ad3bd8093bb72d34be7e2ce5788ae0b119b293"}},{"schema:description":"The data corresponds to the 100 kW Proton Exchange Membrane (PEM) electrolyzer, during which the system’s control strategies were tested and initiated. All set-points were configured manually, without the implementation of automated control sequences. During this phase, the system is heated up without an additional current.","schema:name":"2021-05-06_Data_measured_Heating-Up-Phase_no current.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2021-05-06_Heating-Up-Phase_no current","schema:version":2,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=21975","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/21975","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":2904511,"dvcore:storageIdentifier":"s3://juelich_data:194ac4c9f73-57055b555d7d","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"b4983e053090c019a4ab93060965058e881d9e2e8ce18797d9ab2000bf187e03"}},{"schema:description":"The data corresponds to the 100 kW Proton Exchange Membrane (PEM) electrolyzer, during which the system’s control strategies were tested and initiated. All set-points were configured manually, without the implementation of automated control sequences. During this phase, the system is heated up without an additional current.","schema:name":"2021-12-21_Data_measured_Heating-Up-Phase_no_current.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2021-12-21_Heating-Up-Phase_no_current","schema:version":2,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=21872","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/21872","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":9952207,"dvcore:storageIdentifier":"s3://juelich_data:194ac4ca07f-e56ff4b7ac71","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"934cbf62de3bf0917aef76887c81f4a86220dd769a17d1f9770f1c7d0d10a915"}},{"schema:description":"The data corresponds to the 100 kW Proton Exchange Membrane (PEM) electrolyzer, during which the system’s control strategies were tested and initiated. All set-points were configured manually, without the implementation of automated control sequences. During this phase, the system is heated up without an additional current.","schema:name":"2022-01-17_Data_measured_Heating-Up-Phase_no_current.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2022-01-17_Heating-Up-Phase_no_current","schema:version":2,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22097","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22097","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":13107477,"dvcore:storageIdentifier":"s3://juelich_data:194ac4ca20d-49dc7029808f","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"3e611b71146105a1f1ad944f5a93c367fce7253a0a233a8311f83d595096c816"}},{"schema:description":"The data corresponds to the 100 kW Proton Exchange Membrane (PEM) electrolyzer, during which the system’s control strategies were tested and initiated. All set-points were configured manually, without the implementation of automated control sequences. During this phase, the system is heated up without an additional current.","schema:name":"2022-01-26_Data_measured_Heating-Up-Phase_no_current.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2022-01-26_Heating-Up-Phase_no_current","schema:version":2,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22088","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22088","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":21096162,"dvcore:storageIdentifier":"s3://juelich_data:194ac4ca40c-fb6894dbcbe0","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"113f5fc851cc2b7e5e87e8a8f94db1700172638d81a5511d12cbf79475ee98ff"}},{"schema:description":"The system is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the corresponding measured data recorded during operation of the set-point profile, which defines a trajectory of dynamic ramping constraints.","schema:name":"2023-10-11_Data_measured_Test_Dynamic_Ramping_constraints.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2023-10-11_Test_Dynamic_Ramping_constraints","schema:version":2,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=37087","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/37087","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":11487574,"dvcore:storageIdentifier":"s3://juelich_data:19951c00fbc-fd3de992d6f7","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"fbf8475316e45e81401733ae2eb0d6edc51b96dc9e5416f56fbd057d1555299b"}},{"schema:description":"The 100 kW Proton Exchange Membrane (PEM) electrolyzer is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the set-point profile, which defines a trajectory of dynamic ramping constraints executed through a predefined control sequence.","schema:name":"2023-10-11_Setpoint-Profile_Test_Dynamic_Ramping_constraints.xls","dvcore:restricted":false,"dvcore:directoryLabel":"2023-10-11_Test_Dynamic_Ramping_constraints","schema:version":4,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22095","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22095","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.ms-excel","dvcore:filesize":685568,"dvcore:storageIdentifier":"s3://juelich_data:194ac4ca4af-b6e4dac0f65f","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"67a1ca13a679f331e92cda8f1c2d7cda4b79dfe29a8f9e53dfbea239ab975b58"}},{"schema:description":"The system is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the corresponding measured data recorded during operation of the set-point profile, which defines a trajectory of dynamic ramping constraints. The stack temperature is controlled by a dynamic feedforward control loop. Throughout the procedure, the load remains active and is not switched off.","schema:name":"2023-10-26_Data-measured_Dynamic-Feedforward_Dynamic-Ramping_no-turn-off_abort-1.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2023-10-26_Dynamic-Feedforward_Dynamic-Ramping_no-turn-off_abort-1","schema:version":1,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=37092","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/37092","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":1862426,"dvcore:storageIdentifier":"s3://juelich_data:1995c2e07e0-730c7042f880","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"774e153791bdc09a7040fea67c7f69f3962ff4234f645a236271f36d46c6799d"}},{"schema:description":"The system is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the corresponding measured data recorded during operation of the set-point profile, which defines a trajectory of dynamic ramping constraints. The stack temperature is controlled by a dynamic feedforward control loop. Throughout the procedure, the load remains active and is not switched off.","schema:name":"2023-10-26_Data-measured_Dynamic-Feedforward_Dynamic-Ramping_no-turn-off_abort-2.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2023-10-26_Dynamic-Feedforward_Dynamic-Ramping_no-turn-off_abort-2","schema:version":1,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=37094","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/37094","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":5969611,"dvcore:storageIdentifier":"s3://juelich_data:1995c334ddf-dd742005b50a","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"e757c4f7da53522aa123c568009de61be9861432c2a996dbae906f3a239ea0f2"}},{"schema:description":"The system is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the corresponding measured data recorded during operation of the set-point profile, which defines a trajectory of dynamic ramping constraints.The stack temperature is controlled by a dynamic feedforward control loop. Throughout the procedure, the load remains active and is not switched off.","schema:name":"2023-10-26_Data-measured_Dynamic-Feedforward_Dynamic-Ramping_no-turn-off_abort-3.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2023-10-26_Dynamic-Feedforward_Dynamic-Ramping_no-turn-off_abort-3","schema:version":1,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=37096","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/37096","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":2469201,"dvcore:storageIdentifier":"s3://juelich_data:1995c362943-fea1d180c015","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"2ba84bf01e4316dca2db6d76138d66b8138f18597e7adfd6ec6e7d9496f14c8f"}},{"schema:description":"The 100 kW Proton Exchange Membrane (PEM) electrolyzer is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file defines the set-point profile, specifying the trajectory of dynamic ramping constraints applied through a predefined control sequence. The stack temperature is controlled by a dynamic feedforward control loop. Throughout the procedure, the load remains active and is not switched off.","schema:name":"2023-10-26_Setpoint-Profile_Dynamic-Feedforward_Dynamic-Ramping_no-turn-off_abort-1.xls","dvcore:restricted":false,"dvcore:directoryLabel":"2023-10-26_Dynamic-Feedforward_Dynamic-Ramping_no-turn-off_abort-1","schema:version":1,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=37091","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/37091","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.ms-excel","dvcore:filesize":691712,"dvcore:storageIdentifier":"s3://juelich_data:1995c22bccc-7456a5a8fdbb","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"781cb766c32d71adc45b981f3ffe2f5b2a439bcc2d0ea271df8698bfc9500040"}},{"schema:description":"The 100 kW Proton Exchange Membrane (PEM) electrolyzer is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file defines the set-point profile, specifying the trajectory of dynamic ramping constraints applied through a predefined control sequence. The stack temperature is controlled by a dynamic feedforward control loop. Throughout the procedure, the load remains active and is not switched off.","schema:name":"2023-10-26_Setpoint-Profile_Dynamic-Feedforward_Dynamic-Ramping_no-turn-off_abort-2.xls","dvcore:restricted":false,"dvcore:directoryLabel":"2023-10-26_Dynamic-Feedforward_Dynamic-Ramping_no-turn-off_abort-2","schema:version":1,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=37093","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/37093","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.ms-excel","dvcore:filesize":691712,"dvcore:storageIdentifier":"s3://juelich_data:1995c31ff65-081bdea12181","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"7ea906fc35fd2771dfb65a14fc005fd101499d8d51f885d3d25ac69ede366e35"}},{"schema:description":"The 100 kW Proton Exchange Membrane (PEM) electrolyzer is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file defines the set-point profile, specifying the trajectory of dynamic ramping constraints applied through a predefined control sequence. The stack temperature is controlled by a dynamic feedforward control loop. Throughout the procedure, the load remains active and is not switched off.","schema:name":"2023-10-26_Setpoint-Profile_Dynamic-Feedforward_Dynamic-Ramping_no-turn-off_abort-3.xls","dvcore:restricted":false,"dvcore:directoryLabel":"2023-10-26_Dynamic-Feedforward_Dynamic-Ramping_no-turn-off_abort-3","schema:version":1,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=37095","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/37095","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.ms-excel","dvcore:filesize":708608,"dvcore:storageIdentifier":"s3://juelich_data:1995c350f4a-e8e5db51a3d8","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"d3b23f3a89aa1b012c68b57317a6a4c8b7e8e0af83753af48562bb9e531ff2a4"}},{"schema:description":"The system is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the corresponding measured data recorded during operation of the set-point profile, which defines a trajectory of dynamic ramping constraints. The stack temperature is controlled by a dynamic feedforward control loop. Throughout the procedure, the load remains active and is not switched off.","schema:name":"2023-11-02_Data-measured_Dynamic-Feedforward_Dynamic-Ramping_no-turn-off_meas-1.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2023-11-02_Dynamic-Feedforward_Dynamic-Ramping_no-turn-off_meas-1","schema:version":2,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=22066","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/22066","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":14480583,"dvcore:storageIdentifier":"s3://juelich_data:194ac4ca814-b3b291b63806","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"3fbed63e2978fd632b425d23570363fa26a053c4e86475f769d4f1c774f1a41f"}},{"schema:description":"The 100 kW Proton Exchange Membrane (PEM) electrolyzer is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file defines the set-point profile, specifying the trajectory of dynamic ramping constraints applied through a predefined control sequence. The stack temperature is controlled by a dynamic feedforward control loop. Throughout the procedure, the load remains active and is not switched off.","schema:name":"2023-11-02_Setpoint-Profile_Dynamic-Feedforward_Dynamic-Ramping_no-turn-off_meas-1.xls","dvcore:restricted":false,"dvcore:directoryLabel":"2023-11-02_Dynamic-Feedforward_Dynamic-Ramping_no-turn-off_meas-1","schema:version":1,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=37097","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/37097","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.ms-excel","dvcore:filesize":708608,"dvcore:storageIdentifier":"s3://juelich_data:1995c38bbf3-ae0d681d918b","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"fdd6e54019a45880f5167abeffe5e79836845c3800568a095a2c8d27247e28ac"}},{"schema:description":"The system is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the corresponding measured data recorded during operation of the set-point profile, which defines a trajectory of dynamic ramping constraints.The stack temperature is controlled by a dynamic feedforward control loop. Throughout the procedure, the load remains active and is not switched off.","schema:name":"2023-11-03_Data-measured_Dynamic-Feedforward_Dynamic-Ramping_no-turn-off_abort-4.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2023-11-03_Dynamic-Feedforward_Dynamic-Ramping_no-turn-off_abort-4","schema:version":1,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=37099","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/37099","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":2976753,"dvcore:storageIdentifier":"s3://juelich_data:1995c3f505e-34db61bb987c","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"1b60bea8e52cb5e09762cbb8b3010d6b390b21fa1625ec46090eab9bf5d91859"}},{"schema:description":"The system is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the corresponding measured data recorded during operation of the set-point profile, which defines a trajectory of dynamic ramping constraints. The stack temperature is controlled by a dynamic feedforward control loop. Throughout the procedure, the load remains active and is not switched off.","schema:name":"2023-11-03_Data-measured_Dynamic-Feedforward_Dynamic-Ramping_no-turn-off_abort-5.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2023-11-03_Dynamic-Feedforward_Dynamic-Ramping_no-turn-off_abort-5","schema:version":1,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=37101","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/37101","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":1525536,"dvcore:storageIdentifier":"s3://juelich_data:1995c433f82-266ccdc3a4b2","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"7ed7a93e1412e5769d9c980dd5cd13505d305bd06fcda046e618337c32c479d3"}},{"schema:description":"The system is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the corresponding measured data recorded during operation of the set-point profile, which defines a trajectory of dynamic ramping constraints. The stack temperature is controlled by a dynamic feedforward control loop. Throughout the procedure, the load remains active and is not switched off.","schema:name":"2023-11-03_Data-measured_Dynamic-Feedforward_Dynamic-Ramping_no-turn-off_abort-6.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2023-11-03_Dynamic-Feedforward_Dynamic-Ramping_no-turn-off_abort-6","schema:version":1,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=37103","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/37103","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":1315241,"dvcore:storageIdentifier":"s3://juelich_data:1995c4522b3-2284691da954","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"4b7d31e58b7cd152d2f212c5b73cf0cc7e68c763fc5734f2c0a1b46ec149712e"}},{"schema:description":"The system is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the corresponding measured data recorded during operation of the set-point profile, which defines a trajectory of dynamic ramping constraints. The stack temperature is controlled by a dynamic feedforward control loop. Throughout the procedure, the load remains active and is not switched off.","schema:name":"2023-11-03_Data-measured_Dynamic-Feedforward_Dynamic-Ramping_no-turn-off_abort-7.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2023-11-03_Dynamic-Feedforward_Dynamic-Ramping_no-turn-off_abort-7","schema:version":1,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=37105","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/37105","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":2278697,"dvcore:storageIdentifier":"s3://juelich_data:1995c46fc42-b9b159d7a9ab","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"6c274b065664feae94a827820d3424c32068ea612fc41eb20b0351da082bb157"}},{"schema:description":"The 100 kW Proton Exchange Membrane (PEM) electrolyzer is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file defines the set-point profile, specifying the trajectory of dynamic ramping constraints applied through a predefined control sequence. The stack temperature is controlled by a dynamic feedforward control loop. Throughout the procedure, the load remains active and is not switched off.","schema:name":"2023-11-03_Setpoint-Profile_Dynamic-Feedforward_Dynamic-Ramping_no-turn-off_abort-4.xls","dvcore:restricted":false,"dvcore:directoryLabel":"2023-11-03_Dynamic-Feedforward_Dynamic-Ramping_no-turn-off_abort-4","schema:version":1,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=37098","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/37098","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.ms-excel","dvcore:filesize":708608,"dvcore:storageIdentifier":"s3://juelich_data:1995c3e2653-10fb5ddf9ba1","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"7a0405ac09cdebbf9b0a4eef129db9a6d24a4efda45e8ccb30af59feabf48e04"}},{"schema:description":"The 100 kW Proton Exchange Membrane (PEM) electrolyzer is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file defines the set-point profile, specifying the trajectory of dynamic ramping constraints applied through a predefined control sequence. The stack temperature is controlled by a dynamic feedforward control loop. Throughout the procedure, the load remains active and is not switched off.","schema:name":"2023-11-03_Setpoint-Profile_Dynamic-Feedforward_Dynamic-Ramping_no-turn-off_abort-5.xls","dvcore:restricted":false,"dvcore:directoryLabel":"2023-11-03_Dynamic-Feedforward_Dynamic-Ramping_no-turn-off_abort-5","schema:version":1,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=37100","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/37100","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.ms-excel","dvcore:filesize":708608,"dvcore:storageIdentifier":"s3://juelich_data:1995c41bc4f-1e06fcca29df","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"5e75c86880838d111f72c941c8dca596cb2c2d589ccfea212ebef2b224ba97e2"}},{"schema:description":"The 100 kW Proton Exchange Membrane (PEM) electrolyzer is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file defines the set-point profile, specifying the trajectory of dynamic ramping constraints applied through a predefined control sequence. The stack temperature is controlled by a dynamic feedforward control loop. Throughout the procedure, the load remains active and is not switched off.","schema:name":"2023-11-03_Setpoint-Profile_Dynamic-Feedforward_Dynamic-Ramping_no-turn-off_abort-6.xls","dvcore:restricted":false,"dvcore:directoryLabel":"2023-11-03_Dynamic-Feedforward_Dynamic-Ramping_no-turn-off_abort-6","schema:version":1,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=37102","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/37102","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.ms-excel","dvcore:filesize":708608,"dvcore:storageIdentifier":"s3://juelich_data:1995c443b05-164877e8b235","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"e70a9dad37c32be4e5ac49f99cd021389a6d0fc737836172c9fb73906626d79f"}},{"schema:description":"The 100 kW Proton Exchange Membrane (PEM) electrolyzer is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file defines the set-point profile, specifying the trajectory of dynamic ramping constraints applied through a predefined control sequence. The stack temperature is controlled by a dynamic feedforward control loop. Throughout the procedure, the load remains active and is not switched off.","schema:name":"2023-11-03_Setpoint-Profile_Dynamic-Feedforward_Dynamic-Ramping_no-turn-off_abort-7.xls","dvcore:restricted":false,"dvcore:directoryLabel":"2023-11-03_Dynamic-Feedforward_Dynamic-Ramping_no-turn-off_abort-7","schema:version":1,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=37104","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/37104","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.ms-excel","dvcore:filesize":708608,"dvcore:storageIdentifier":"s3://juelich_data:1995c462ec4-ba471a75de30","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"04d42aedb509c0dcef7933987f8369701efcd757ac489b1e1c53884429a0355f"}},{"schema:description":"The system is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the corresponding measured data recorded during operation of the set-point profile, which defines a trajectory of dynamic ramping constraints. The stack temperature is controlled by a dynamic feedforward control loop. During the procedure, the load was partially switched off.","schema:name":"2023-11-09_Data-measured_Dynamic-Feedforward_Dynamic-Ramping_turn-off_abort-8.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2023-11-09_Dynamic-Feedforward_Dynamic-Ramping_turn-off_abort-8","schema:version":1,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=37107","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/37107","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":9234809,"dvcore:storageIdentifier":"s3://juelich_data:1995c4e3035-7af6ab0220c7","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"d986ba341c335926de3e3d8ea29b82d4bac92ac0715dc71bc3f5f3bfcb8c6612"}},{"schema:description":"The system is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the corresponding measured data recorded during operation of the set-point profile, which defines a trajectory of dynamic ramping constraints. The stack temperature is controlled by a dynamic feedforward control loop. During the procedure, the load was partially switched off.","schema:name":"2023-11-09_Data-measured_Dynamic-Feedforward_Dynamic-Ramping_turn-off_abort-9.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2023-11-09_Dynamic-Feedforward_Dynamic-Ramping_turn-off_abort-9","schema:version":1,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=37109","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/37109","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":1791696,"dvcore:storageIdentifier":"s3://juelich_data:1995c5055be-c16bcdcd6624","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"28a44f4a8ea6419e24dda73fa52ce1769df4b3c92f570c005cf253ee15e1fb92"}},{"schema:description":"The 100 kW Proton Exchange Membrane (PEM) electrolyzer is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file defines the set-point profile, specifying the trajectory of dynamic ramping constraints applied through a predefined control sequence. The stack temperature is controlled by a dynamic feedforward control loop. During the procedure, the load was partially switched off.","schema:name":"2023-11-09_Setpoint-Profile_Dynamic-Feedforward_Dynamic-Ramping_turn-off_abort-8.xls","dvcore:restricted":false,"dvcore:directoryLabel":"2023-11-09_Dynamic-Feedforward_Dynamic-Ramping_turn-off_abort-8","schema:version":1,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=37106","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/37106","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.ms-excel","dvcore:filesize":727040,"dvcore:storageIdentifier":"s3://juelich_data:1995c490204-5bbaa171d44a","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"9b30bb8da6fc001b0ee2f44e99d24f6f62317fad5a5d441c5eb22bf1e79b078a"}},{"schema:description":"The 100 kW Proton Exchange Membrane (PEM) electrolyzer is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file defines the set-point profile, specifying the trajectory of dynamic ramping constraints applied through a predefined control sequence. The stack temperature is controlled by a dynamic feedforward control loop. During the procedure, the load was partially switched off.","schema:name":"2023-11-09_Setpoint-Profile_Dynamic-Feedforward_Dynamic-Ramping_turn-off_abort-9.xls","dvcore:restricted":false,"dvcore:directoryLabel":"2023-11-09_Dynamic-Feedforward_Dynamic-Ramping_turn-off_abort-9","schema:version":1,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=37108","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/37108","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.ms-excel","dvcore:filesize":727040,"dvcore:storageIdentifier":"s3://juelich_data:1995c4fb2e3-35255d6d22a3","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"e3d45671a838378d2076fa6b7a692f33609fb7274028b10c439fcce8e716ef38"}},{"schema:description":"The system is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the corresponding measured data recorded during operation of the set-point profile, which defines a trajectory of dynamic ramping constraints. The stack temperature is controlled by a dynamic feedforward control loop. During the procedure, the load was partially switched off.","schema:name":"2023-11-13_Data-measured_Dynamic-Feedforward_Dynamic-Ramping_turn-off_abort-10.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2023-11-13_Dynamic-Feedforward_Dynamic-Ramping_turn-off_abort-10","schema:version":1,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=37111","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/37111","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":6471725,"dvcore:storageIdentifier":"s3://juelich_data:1995c51e104-41529446c872","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"266b61f3156b07458084ddf4d2ea7a7dd6be7fb00d641cc71042ba9db9c8fd7b"}},{"schema:description":"The 100 kW Proton Exchange Membrane (PEM) electrolyzer is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file defines the set-point profile, specifying the trajectory of dynamic ramping constraints applied through a predefined control sequence. The stack temperature is controlled by a dynamic feedforward control loop. During the procedure, the load was partially switched off.","schema:name":"2023-11-13_Setpoint-Profile_Dynamic-Feedforward_Dynamic-Ramping_turn-off_abort-10.xls","dvcore:restricted":false,"dvcore:directoryLabel":"2023-11-13_Dynamic-Feedforward_Dynamic-Ramping_turn-off_abort-10","schema:version":1,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=37110","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/37110","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.ms-excel","dvcore:filesize":727040,"dvcore:storageIdentifier":"s3://juelich_data:1995c514010-42ac7f571e15","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"ed51bde45f812fe310d9330ff3253130db5d7549279c272de6e5a44850020cfd"}},{"schema:description":"The system is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the corresponding measured data recorded during operation of the set-point profile, which defines a trajectory of dynamic ramping constraints. The stack temperature is controlled by a dynamic feedforward control loop. During the procedure, the load was partially switched off.","schema:name":"2023-11-14_Data-measured_Dynamic-Feedforward_Dynamic-Ramping_turn-off-1_meas-2.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2023-11-14_Dynamic-Feedforward_Dynamic-Ramping_turn-off-1_meas-2","schema:version":1,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=37113","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/37113","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":14137114,"dvcore:storageIdentifier":"s3://juelich_data:1995c54c8a5-ece5c286c73b","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"84a3b0cf4eb1ec9e0d1db6a5e3804d429777beea8f1b570d299fcf91533e89bd"}},{"schema:description":"The 100 kW Proton Exchange Membrane (PEM) electrolyzer is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file defines the set-point profile, specifying the trajectory of dynamic ramping constraints applied through a predefined control sequence. The stack temperature is controlled by a dynamic feedforward control loop. During the procedure, the load was partially switched off.","schema:name":"2023-11-14_Setpoint-Profile_Dynamic-Feedforward_Dynamic-Ramping_turn-off-1_meas-2.xls","dvcore:restricted":false,"dvcore:directoryLabel":"2023-11-14_Dynamic-Feedforward_Dynamic-Ramping_turn-off-1_meas-2","schema:version":1,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=37112","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/37112","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.ms-excel","dvcore:filesize":727040,"dvcore:storageIdentifier":"s3://juelich_data:1995c5419b1-97168c63e8d4","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"cbeaa61652f079a62c8c76ebeedcc253898cc2b3ad6cd9f2edc24c66b5bf7382"}},{"schema:description":"The system is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the corresponding measured data recorded during operation of the set-point profile, which defines a trajectory of dynamic ramping constraints. The stack temperature is controlled by a dynamic feedforward control loop. During the procedure, the load was partially switched off.","schema:name":"2023-11-15_Data-measured_Dynamic-Feedforward_Dynamic-Ramping_turn-off-2_meas-3.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2023-11-15_Dynamic-Feedforward_Dynamic-Ramping_turn-off-2_meas-3","schema:version":1,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=37115","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/37115","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":15627244,"dvcore:storageIdentifier":"s3://juelich_data:1995c59217e-db80d7a61835","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"87b0fb95d6c89f42c677a77475f250ca2c7ac51cb6f44ff0efc64d34f851e682"}},{"schema:description":"The 100 kW Proton Exchange Membrane (PEM) electrolyzer is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file defines the set-point profile, specifying the trajectory of dynamic ramping constraints applied through a predefined control sequence. The stack temperature is controlled by a dynamic feedforward control loop. During the procedure, the load was partially switched off.","schema:name":"2023-11-15_Setpoint-Profile_Dynamic-Feedforward_Dynamic-Ramping_turn-off-2_meas-3.xls","dvcore:restricted":false,"dvcore:directoryLabel":"2023-11-15_Dynamic-Feedforward_Dynamic-Ramping_turn-off-2_meas-3","schema:version":1,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=37114","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/37114","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.ms-excel","dvcore:filesize":727040,"dvcore:storageIdentifier":"s3://juelich_data:1995c585069-9ad9abff07f9","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"061af3354f671f1efc44fcd5a4e536144fa4814fe7b0ef20609743b8c85e005a"}},{"schema:description":"The system is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the corresponding measured data recorded during operation of the set-point profile, which defines a trajectory of dynamic ramping constraints. The stack temperature is controlled by a PID control loop. During the procedure, the load was partially switched off.","schema:name":"2023-11-20_Data-measured_PID_Dynamic-Ramping_turn-off_meas-4.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2023-11-20_PID_Dynamic-Ramping_turn-off_meas-4","schema:version":1,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=37117","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/37117","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":14094005,"dvcore:storageIdentifier":"s3://juelich_data:1995c5c219d-78cec2750028","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"9f7bc501b993c295022baaccaa955dbce638cee9b2c118e642f6f3047b347c19"}},{"schema:description":"The 100 kW Proton Exchange Membrane (PEM) electrolyzer is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file defines the set-point profile, specifying the trajectory of dynamic ramping constraints applied through a predefined control sequence. The stack temperature is controlled by a PID control loop. During the procedure, the load was partially switched off.","schema:name":"2023-11-20_Setpoint-Profile_PID_Dynamic-Ramping_turn-off_meas-4.xls","dvcore:restricted":false,"dvcore:directoryLabel":"2023-11-20_PID_Dynamic-Ramping_turn-off_meas-4","schema:version":1,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=37116","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/37116","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.ms-excel","dvcore:filesize":727040,"dvcore:storageIdentifier":"s3://juelich_data:1995c5b4186-f39be596860d","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"e280185d94e919e36dd8734d50cf03bb5e2c012084acad885d4a9e9fb2eb1f86"}},{"schema:description":"The system is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the corresponding measured data recorded during operation of the set-point profile, which defines a trajectory of dynamic ramping constraints. The stack temperature is controlled by a PID control loop. Throughout the procedure, the load remains active and is not switched off.","schema:name":"2023-11-22_Data-measured_PID_Dynamic-Ramping_no-turn-off_meas-5.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2023-11-22_PID_Dynamic-Ramping_no-turn-off_meas-5","schema:version":2,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=37119","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/37119","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":14682325,"dvcore:storageIdentifier":"s3://juelich_data:1995c5ed72d-2eaa4009f561","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"8ea1f48d50a9eeb1cd41f9a6ea7d975844fca2d73f74bb51444837829fff2bdd"}},{"schema:description":"The 100 kW Proton Exchange Membrane (PEM) electrolyzer is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file defines the set-point profile, specifying the trajectory of dynamic ramping constraints applied through a predefined control sequence. The stack temperature is controlled by a PID control loop. Throughout the procedure, the load remains active and is not switched off.","schema:name":"2023-11-22_Setpoint-Profile_PID_Dynamic-Ramping_no-turn-off_meas-5.xls","dvcore:restricted":false,"dvcore:directoryLabel":"2023-11-22_PID_Dynamic-Ramping_no-turn-off_meas-5","schema:version":2,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=37118","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/37118","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.ms-excel","dvcore:filesize":708608,"dvcore:storageIdentifier":"s3://juelich_data:1995c5e18ef-35ed7e1474bb","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"73c04cb1a4b269d4d58380ad9194eb9e140d79c1d145e47d6ce0dcdf1cdb1c0f"}},{"schema:description":"The system is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the corresponding measured data recorded during operation of the set-point profile, which defines a trajectory of dynamic ramping constraints. The stack temperature is controlled by a dynamic feedforward control loop. Throughout the procedure, the load remains active and is not switched off.","schema:name":"2023-11-23_Data-measured_Dynamic-Feedforward_Benchmark_no-turn-off_meas-6.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2023-11-23_Dynamic-Feedforward_Benchmark_no-turn-off_meas-6","schema:version":1,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=37121","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/37121","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":15309197,"dvcore:storageIdentifier":"s3://juelich_data:1995c647030-216722794875","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"3e248d1c38e8f6d97fec3b72ec17f86d31d91beb9d7c58bc2f9b0a2f6bcd4667"}},{"schema:description":"The 100 kW Proton Exchange Membrane (PEM) electrolyzer is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file defines the set-point profile, specifying the trajectory of dynamic ramping constraints applied through a predefined control sequence. The stack temperature is controlled by a dynamic feedforward control loop. Throughout the procedure, the load remains active and is not switched off.","schema:name":"2023-11-23_Setpoint-Profile_Dynamic-Feedforward_Benchmark_no-turn-off_meas-6.xls","dvcore:restricted":false,"dvcore:directoryLabel":"2023-11-23_Dynamic-Feedforward_Benchmark_no-turn-off_meas-6","schema:version":1,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=37120","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/37120","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.ms-excel","dvcore:filesize":693760,"dvcore:storageIdentifier":"s3://juelich_data:1995c636284-122f0e3ffacb","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"84b918265f37694787721e01a1c2242fb5bc12f047b930541fd21b4c91a269d6"}},{"schema:description":"The system is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the corresponding measured data recorded during operation of the set-point profile, which defines a trajectory of dynamic ramping constraints. The stack temperature is controlled by a PID control loop. Throughout the procedure, the load remains active and is not switched off.","schema:name":"2023-11-27_Data-measured_PID_Benchmark_no-turn-off_meas-7.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2023-11-27_PID_Benchmark_no-turn-off_meas-7","schema:version":1,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=37123","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/37123","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":15542152,"dvcore:storageIdentifier":"s3://juelich_data:1995c68fb96-61d6e61d8776","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"a82ded33a570a6c90c9149fc96a381de1e28da0cf569112328646a66e3e82bfa"}},{"schema:description":"The 100 kW Proton Exchange Membrane (PEM) electrolyzer is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file defines the set-point profile, specifying the trajectory of dynamic ramping constraints applied through a predefined control sequence. The stack temperature is controlled by a PID control loop. Throughout the procedure, the load remains active and is not switched off.","schema:name":"2023-11-27_Setpoint-Profile_PID_Benchmark_no-turn-off_meas-7.xls","dvcore:restricted":false,"dvcore:directoryLabel":"2023-11-27_PID_Benchmark_no-turn-off_meas-7","schema:version":1,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=37122","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/37122","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.ms-excel","dvcore:filesize":684544,"dvcore:storageIdentifier":"s3://juelich_data:1995c680724-29b88eeb8598","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"c0dde797fbb0369c7ea4ccd6394f13b0e7e2b555d72325b0760c5de660193c6c"}},{"schema:description":"The system is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the corresponding measured data recorded during operation of the set-point profile, which defines a trajectory of dynamic ramping constraints. The stack temperature is controlled by a static feedforward control loop. Throughout the procedure, the load remains active and is not switched off.","schema:name":"2023-11-28_Data-measured_Static-Feedforward_Dynamic-Ramping_no-turn-off_meas-8.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2023-11-28_Static-Feedforward_Dynamic-Ramping_no-turn-off_meas-8","schema:version":1,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=37125","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/37125","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":14147366,"dvcore:storageIdentifier":"s3://juelich_data:1995c6bf61f-2cba9d29ccdc","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"35e12ef578be6fa1bf3dedd3703c9962fd294944727a02b75364796b30cf9c38"}},{"schema:description":"The 100 kW Proton Exchange Membrane (PEM) electrolyzer is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file defines the set-point profile, specifying the trajectory of dynamic ramping constraints applied through a predefined control sequence. The stack temperature is controlled by a static feedforward control loop. Throughout the procedure, the load remains active and is not switched off.","schema:name":"2023-11-28_Setpoint-Profile_Static-Feedforward_Dynamic-Ramping_no-turn-off_meas-8.xls","dvcore:restricted":false,"dvcore:directoryLabel":"2023-11-28_Static-Feedforward_Dynamic-Ramping_no-turn-off_meas-8","schema:version":1,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=37124","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/37124","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.ms-excel","dvcore:filesize":736256,"dvcore:storageIdentifier":"s3://juelich_data:1995c6aeeba-02f9e9708b6d","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"1f8e41d52c24914f8a5e6d349737f4880d76f19e383efa6d1556881fc344c836"}},{"schema:description":"The system is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file contains the corresponding measured data recorded during operation of the set-point profile, which defines a trajectory of dynamic ramping constraints. The stack temperature is controlled by a static feedforward control loop. During the procedure, the load was partially switched off.","schema:name":"2023-11-29_Data-measured_Static-Feedforward_Dynamic-Ramping_turn-off_meas-9.xlsx","dvcore:restricted":false,"dvcore:directoryLabel":"2023-11-29_Static-Feedforward_Dynamic-Ramping_turn-off_meas-9","schema:version":1,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=37127","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/37127","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet","dvcore:filesize":16543323,"dvcore:storageIdentifier":"s3://juelich_data:1995c6df4ab-e62924ebddaf","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"53c8dd78f32eafba3543ff9ef5f65b94d6454d0130c48b8e11f12b29b058d5d4"}},{"schema:description":"The 100 kW Proton Exchange Membrane (PEM) electrolyzer is operating under normal conditions, with all set-points defined by a predefined set-point profile executed through a control sequence. This file defines the set-point profile, specifying the trajectory of dynamic ramping constraints applied through a predefined control sequence. The stack temperature is controlled by a static feedforward control loop. During the procedure, the load was partially switched off.","schema:name":"2023-11-29_Setpoint-Profile_Static-Feedforward_Dynamic-Ramping_turn-off_meas-9.xls","dvcore:restricted":false,"dvcore:directoryLabel":"2023-11-29_Static-Feedforward_Dynamic-Ramping_turn-off_meas-9","schema:version":1,"dvcore:datasetVersionId":751,"@id":"https://data.fz-juelich.de/file.xhtml?fileId=37126","schema:sameAs":"https://data.fz-juelich.de/api/access/datafile/37126","@type":"ore:AggregatedResource","schema:fileFormat":"application/vnd.ms-excel","dvcore:filesize":758784,"dvcore:storageIdentifier":"s3://juelich_data:1995c6d2ad6-091f77b4d316","dvcore:rootDataFileId":-1,"dvcore:checksum":{"@type":"SHA-256","@value":"516f405dffae81f703713d3ab08c15d5744efc5369f608209633c896ded72ff2"}}],"schema:hasPart":["https://data.fz-juelich.de/file.xhtml?fileId=37315","https://data.fz-juelich.de/file.xhtml?fileId=37791","https://data.fz-juelich.de/file.xhtml?fileId=37314","https://data.fz-juelich.de/file.xhtml?fileId=21902","https://data.fz-juelich.de/file.xhtml?fileId=22120","https://data.fz-juelich.de/file.xhtml?fileId=21883","https://data.fz-juelich.de/file.xhtml?fileId=22125","https://data.fz-juelich.de/file.xhtml?fileId=22023","https://data.fz-juelich.de/file.xhtml?fileId=21955","https://data.fz-juelich.de/file.xhtml?fileId=21954","https://data.fz-juelich.de/file.xhtml?fileId=22060","https://data.fz-juelich.de/file.xhtml?fileId=21937","https://data.fz-juelich.de/file.xhtml?fileId=21905","https://data.fz-juelich.de/file.xhtml?fileId=22017","https://data.fz-juelich.de/file.xhtml?fileId=21887","https://data.fz-juelich.de/file.xhtml?fileId=22092","https://data.fz-juelich.de/file.xhtml?fileId=21890","https://data.fz-juelich.de/file.xhtml?fileId=22133","https://data.fz-juelich.de/file.xhtml?fileId=21980","https://data.fz-juelich.de/file.xhtml?fileId=22013","https://data.fz-juelich.de/file.xhtml?fileId=22078","https://data.fz-juelich.de/file.xhtml?fileId=21988","https://data.fz-juelich.de/file.xhtml?fileId=21871","https://data.fz-juelich.de/file.xhtml?fileId=21961","https://data.fz-juelich.de/file.xhtml?fileId=22140","https://data.fz-juelich.de/file.xhtml?fileId=22049","https://data.fz-juelich.de/file.xhtml?fileId=21965","https://data.fz-juelich.de/file.xhtml?fileId=21998","https://data.fz-juelich.de/file.xhtml?fileId=21918","https://data.fz-juelich.de/file.xhtml?fileId=21944","https://data.fz-juelich.de/file.xhtml?fileId=22158","https://data.fz-juelich.de/file.xhtml?fileId=22152","https://data.fz-juelich.de/file.xhtml?fileId=22087","https://data.fz-juelich.de/file.xhtml?fileId=22086","https://data.fz-juelich.de/file.xhtml?fileId=21950","https://data.fz-juelich.de/file.xhtml?fileId=21879","https://data.fz-juelich.de/file.xhtml?fileId=22076","https://data.fz-juelich.de/file.xhtml?fileId=21966","https://data.fz-juelich.de/file.xhtml?fileId=22111","https://data.fz-juelich.de/file.xhtml?fileId=22047","https://data.fz-juelich.de/file.xhtml?fileId=22045","https://data.fz-juelich.de/file.xhtml?fileId=22090","https://data.fz-juelich.de/file.xhtml?fileId=22150","https://data.fz-juelich.de/file.xhtml?fileId=22070","https://data.fz-juelich.de/file.xhtml?fileId=22099","https://data.fz-juelich.de/file.xhtml?fileId=21898","https://data.fz-juelich.de/file.xhtml?fileId=21969","https://data.fz-juelich.de/file.xhtml?fileId=21909","https://data.fz-juelich.de/file.xhtml?fileId=22153","https://data.fz-juelich.de/file.xhtml?fileId=21981","https://data.fz-juelich.de/file.xhtml?fileId=22014","https://data.fz-juelich.de/file.xhtml?fileId=21945","https://data.fz-juelich.de/file.xhtml?fileId=22024","https://data.fz-juelich.de/file.xhtml?fileId=21915","https://data.fz-juelich.de/file.xhtml?fileId=22042","https://data.fz-juelich.de/file.xhtml?fileId=22051","https://data.fz-juelich.de/file.xhtml?fileId=21948","https://data.fz-juelich.de/file.xhtml?fileId=22001","https://data.fz-juelich.de/file.xhtml?fileId=22069","https://data.fz-juelich.de/file.xhtml?fileId=22003","https://data.fz-juelich.de/file.xhtml?fileId=22130","https://data.fz-juelich.de/file.xhtml?fileId=22109","https://data.fz-juelich.de/file.xhtml?fileId=21913","https://data.fz-juelich.de/file.xhtml?fileId=21967","https://data.fz-juelich.de/file.xhtml?fileId=21986","https://data.fz-juelich.de/file.xhtml?fileId=22040","https://data.fz-juelich.de/file.xhtml?fileId=22052","https://data.fz-juelich.de/file.xhtml?fileId=21974","https://data.fz-juelich.de/file.xhtml?fileId=21990","https://data.fz-juelich.de/file.xhtml?fileId=21989","https://data.fz-juelich.de/file.xhtml?fileId=22055","https://data.fz-juelich.de/file.xhtml?fileId=22110","https://data.fz-juelich.de/file.xhtml?fileId=22091","https://data.fz-juelich.de/file.xhtml?fileId=22009","https://data.fz-juelich.de/file.xhtml?fileId=21995","https://data.fz-juelich.de/file.xhtml?fileId=22104","https://data.fz-juelich.de/file.xhtml?fileId=21939","https://data.fz-juelich.de/file.xhtml?fileId=22144","https://data.fz-juelich.de/file.xhtml?fileId=21992","https://data.fz-juelich.de/file.xhtml?fileId=22035","https://data.fz-juelich.de/file.xhtml?fileId=21916","https://data.fz-juelich.de/file.xhtml?fileId=22129","https://data.fz-juelich.de/file.xhtml?fileId=22007","https://data.fz-juelich.de/file.xhtml?fileId=21873","https://data.fz-juelich.de/file.xhtml?fileId=21924","https://data.fz-juelich.de/file.xhtml?fileId=22083","https://data.fz-juelich.de/file.xhtml?fileId=22101","https://data.fz-juelich.de/file.xhtml?fileId=21972","https://data.fz-juelich.de/file.xhtml?fileId=21874","https://data.fz-juelich.de/file.xhtml?fileId=22094","https://data.fz-juelich.de/file.xhtml?fileId=22028","https://data.fz-juelich.de/file.xhtml?fileId=21908","https://data.fz-juelich.de/file.xhtml?fileId=22145","https://data.fz-juelich.de/file.xhtml?fileId=22081","https://data.fz-juelich.de/file.xhtml?fileId=21901","https://data.fz-juelich.de/file.xhtml?fileId=21947","https://data.fz-juelich.de/file.xhtml?fileId=22161","https://data.fz-juelich.de/file.xhtml?fileId=21962","https://data.fz-juelich.de/file.xhtml?fileId=21943","https://data.fz-juelich.de/file.xhtml?fileId=22046","https://data.fz-juelich.de/file.xhtml?fileId=21952","https://data.fz-juelich.de/file.xhtml?fileId=22054","https://data.fz-juelich.de/file.xhtml?fileId=21899","https://data.fz-juelich.de/file.xhtml?fileId=22005","https://data.fz-juelich.de/file.xhtml?fileId=21923","https://data.fz-juelich.de/file.xhtml?fileId=21929","https://data.fz-juelich.de/file.xhtml?fileId=22032","https://data.fz-juelich.de/file.xhtml?fileId=21904","https://data.fz-juelich.de/file.xhtml?fileId=22064","https://data.fz-juelich.de/file.xhtml?fileId=22137","https://data.fz-juelich.de/file.xhtml?fileId=21996","https://data.fz-juelich.de/file.xhtml?fileId=21891","https://data.fz-juelich.de/file.xhtml?fileId=22157","https://data.fz-juelich.de/file.xhtml?fileId=22079","https://data.fz-juelich.de/file.xhtml?fileId=22073","https://data.fz-juelich.de/file.xhtml?fileId=22122","https://data.fz-juelich.de/file.xhtml?fileId=22061","https://data.fz-juelich.de/file.xhtml?fileId=21925","https://data.fz-juelich.de/file.xhtml?fileId=22139","https://data.fz-juelich.de/file.xhtml?fileId=22080","https://data.fz-juelich.de/file.xhtml?fileId=22002","https://data.fz-juelich.de/file.xhtml?fileId=21893","https://data.fz-juelich.de/file.xhtml?fileId=22154","https://data.fz-juelich.de/file.xhtml?fileId=21978","https://data.fz-juelich.de/file.xhtml?fileId=21979","https://data.fz-juelich.de/file.xhtml?fileId=22077","https://data.fz-juelich.de/file.xhtml?fileId=21888","https://data.fz-juelich.de/file.xhtml?fileId=22146","https://data.fz-juelich.de/file.xhtml?fileId=22000","https://data.fz-juelich.de/file.xhtml?fileId=22065","https://data.fz-juelich.de/file.xhtml?fileId=22027","https://data.fz-juelich.de/file.xhtml?fileId=21960","https://data.fz-juelich.de/file.xhtml?fileId=21882","https://data.fz-juelich.de/file.xhtml?fileId=21917","https://data.fz-juelich.de/file.xhtml?fileId=21934","https://data.fz-juelich.de/file.xhtml?fileId=21958","https://data.fz-juelich.de/file.xhtml?fileId=22118","https://data.fz-juelich.de/file.xhtml?fileId=21983","https://data.fz-juelich.de/file.xhtml?fileId=22074","https://data.fz-juelich.de/file.xhtml?fileId=21949","https://data.fz-juelich.de/file.xhtml?fileId=22057","https://data.fz-juelich.de/file.xhtml?fileId=21997","https://data.fz-juelich.de/file.xhtml?fileId=21951","https://data.fz-juelich.de/file.xhtml?fileId=22113","https://data.fz-juelich.de/file.xhtml?fileId=22010","https://data.fz-juelich.de/file.xhtml?fileId=21932","https://data.fz-juelich.de/file.xhtml?fileId=22116","https://data.fz-juelich.de/file.xhtml?fileId=21897","https://data.fz-juelich.de/file.xhtml?fileId=22058","https://data.fz-juelich.de/file.xhtml?fileId=22089","https://data.fz-juelich.de/file.xhtml?fileId=21970","https://data.fz-juelich.de/file.xhtml?fileId=21875","https://data.fz-juelich.de/file.xhtml?fileId=22100","https://data.fz-juelich.de/file.xhtml?fileId=22148","https://data.fz-juelich.de/file.xhtml?fileId=21982","https://data.fz-juelich.de/file.xhtml?fileId=21920","https://data.fz-juelich.de/file.xhtml?fileId=22025","https://data.fz-juelich.de/file.xhtml?fileId=22021","https://data.fz-juelich.de/file.xhtml?fileId=21919","https://data.fz-juelich.de/file.xhtml?fileId=21999","https://data.fz-juelich.de/file.xhtml?fileId=21938","https://data.fz-juelich.de/file.xhtml?fileId=21912","https://data.fz-juelich.de/file.xhtml?fileId=21907","https://data.fz-juelich.de/file.xhtml?fileId=21991","https://data.fz-juelich.de/file.xhtml?fileId=22119","https://data.fz-juelich.de/file.xhtml?fileId=21971","https://data.fz-juelich.de/file.xhtml?fileId=22041","https://data.fz-juelich.de/file.xhtml?fileId=21894","https://data.fz-juelich.de/file.xhtml?fileId=22117","https://data.fz-juelich.de/file.xhtml?fileId=21922","https://data.fz-juelich.de/file.xhtml?fileId=22151","https://data.fz-juelich.de/file.xhtml?fileId=21927","https://data.fz-juelich.de/file.xhtml?fileId=22026","https://data.fz-juelich.de/file.xhtml?fileId=22114","https://data.fz-juelich.de/file.xhtml?fileId=22138","https://data.fz-juelich.de/file.xhtml?fileId=21885","https://data.fz-juelich.de/file.xhtml?fileId=22062","https://data.fz-juelich.de/file.xhtml?fileId=21930","https://data.fz-juelich.de/file.xhtml?fileId=22067","https://data.fz-juelich.de/file.xhtml?fileId=22126","https://data.fz-juelich.de/file.xhtml?fileId=21973","https://data.fz-juelich.de/file.xhtml?fileId=21946","https://data.fz-juelich.de/file.xhtml?fileId=22053","https://data.fz-juelich.de/file.xhtml?fileId=22018","https://data.fz-juelich.de/file.xhtml?fileId=22030","https://data.fz-juelich.de/file.xhtml?fileId=21903","https://data.fz-juelich.de/file.xhtml?fileId=22127","https://data.fz-juelich.de/file.xhtml?fileId=21921","https://data.fz-juelich.de/file.xhtml?fileId=22124","https://data.fz-juelich.de/file.xhtml?fileId=22071","https://data.fz-juelich.de/file.xhtml?fileId=21931","https://data.fz-juelich.de/file.xhtml?fileId=22015","https://data.fz-juelich.de/file.xhtml?fileId=22103","https://data.fz-juelich.de/file.xhtml?fileId=22102","https://data.fz-juelich.de/file.xhtml?fileId=22160","https://data.fz-juelich.de/file.xhtml?fileId=22050","https://data.fz-juelich.de/file.xhtml?fileId=22008","https://data.fz-juelich.de/file.xhtml?fileId=21984","https://data.fz-juelich.de/file.xhtml?fileId=22072","https://data.fz-juelich.de/file.xhtml?fileId=22020","https://data.fz-juelich.de/file.xhtml?fileId=22075","https://data.fz-juelich.de/file.xhtml?fileId=22093","https://data.fz-juelich.de/file.xhtml?fileId=22115","https://data.fz-juelich.de/file.xhtml?fileId=21935","https://data.fz-juelich.de/file.xhtml?fileId=21956","https://data.fz-juelich.de/file.xhtml?fileId=21914","https://data.fz-juelich.de/file.xhtml?fileId=21957","https://data.fz-juelich.de/file.xhtml?fileId=22048","https://data.fz-juelich.de/file.xhtml?fileId=21987","https://data.fz-juelich.de/file.xhtml?fileId=22043","https://data.fz-juelich.de/file.xhtml?fileId=22085","https://data.fz-juelich.de/file.xhtml?fileId=22132","https://data.fz-juelich.de/file.xhtml?fileId=22136","https://data.fz-juelich.de/file.xhtml?fileId=22044","https://data.fz-juelich.de/file.xhtml?fileId=21975","https://data.fz-juelich.de/file.xhtml?fileId=21872","https://data.fz-juelich.de/file.xhtml?fileId=22097","https://data.fz-juelich.de/file.xhtml?fileId=22088","https://data.fz-juelich.de/file.xhtml?fileId=37087","https://data.fz-juelich.de/file.xhtml?fileId=22095","https://data.fz-juelich.de/file.xhtml?fileId=37092","https://data.fz-juelich.de/file.xhtml?fileId=37094","https://data.fz-juelich.de/file.xhtml?fileId=37096","https://data.fz-juelich.de/file.xhtml?fileId=37091","https://data.fz-juelich.de/file.xhtml?fileId=37093","https://data.fz-juelich.de/file.xhtml?fileId=37095","https://data.fz-juelich.de/file.xhtml?fileId=22066","https://data.fz-juelich.de/file.xhtml?fileId=37097","https://data.fz-juelich.de/file.xhtml?fileId=37099","https://data.fz-juelich.de/file.xhtml?fileId=37101","https://data.fz-juelich.de/file.xhtml?fileId=37103","https://data.fz-juelich.de/file.xhtml?fileId=37105","https://data.fz-juelich.de/file.xhtml?fileId=37098","https://data.fz-juelich.de/file.xhtml?fileId=37100","https://data.fz-juelich.de/file.xhtml?fileId=37102","https://data.fz-juelich.de/file.xhtml?fileId=37104","https://data.fz-juelich.de/file.xhtml?fileId=37107","https://data.fz-juelich.de/file.xhtml?fileId=37109","https://data.fz-juelich.de/file.xhtml?fileId=37106","https://data.fz-juelich.de/file.xhtml?fileId=37108","https://data.fz-juelich.de/file.xhtml?fileId=37111","https://data.fz-juelich.de/file.xhtml?fileId=37110","https://data.fz-juelich.de/file.xhtml?fileId=37113","https://data.fz-juelich.de/file.xhtml?fileId=37112","https://data.fz-juelich.de/file.xhtml?fileId=37115","https://data.fz-juelich.de/file.xhtml?fileId=37114","https://data.fz-juelich.de/file.xhtml?fileId=37117","https://data.fz-juelich.de/file.xhtml?fileId=37116","https://data.fz-juelich.de/file.xhtml?fileId=37119","https://data.fz-juelich.de/file.xhtml?fileId=37118","https://data.fz-juelich.de/file.xhtml?fileId=37121","https://data.fz-juelich.de/file.xhtml?fileId=37120","https://data.fz-juelich.de/file.xhtml?fileId=37123","https://data.fz-juelich.de/file.xhtml?fileId=37122","https://data.fz-juelich.de/file.xhtml?fileId=37125","https://data.fz-juelich.de/file.xhtml?fileId=37124","https://data.fz-juelich.de/file.xhtml?fileId=37127","https://data.fz-juelich.de/file.xhtml?fileId=37126"]},"@context":{"Author":"http://purl.org/dc/terms/creator","Citation":"http://purl.org/dc/terms/bibliographicCitation","Contributor":"http://purl.org/dc/terms/contributor","Deposit Date":"http://purl.org/dc/terms/dateSubmitted","ID Number":"http://purl.org/spar/datacite/ResourceIdentifier","ID Type":"http://purl.org/spar/datacite/ResourceIdentifierScheme","Identifier":"http://purl.org/spar/datacite/AgentIdentifier","Identifier Scheme":"http://purl.org/spar/datacite/AgentIdentifierScheme","Kind of Data":"http://rdf-vocabulary.ddialliance.org/discovery#kindOfData","Related Publication":"http://purl.org/dc/terms/isReferencedBy","Subject":"http://purl.org/dc/terms/subject","Time Period Covered":"https://schema.org/temporalCoverage","Title":"http://purl.org/dc/terms/title","URL":"https://schema.org/distribution","author":"https://dataverse.org/schema/citation/author#","citation":"https://dataverse.org/schema/citation/","contributor":"https://dataverse.org/schema/citation/contributor#","datasetContact":"https://dataverse.org/schema/citation/datasetContact#","dateOfCollection":"https://dataverse.org/schema/citation/dateOfCollection#","dcterms":"http://purl.org/dc/terms/","dsDescription":"https://dataverse.org/schema/citation/dsDescription#","dvcore":"https://dataverse.org/schema/core#","fzj":"https://jugit.fz-juelich.de/fdm/schemas","ore":"http://www.openarchives.org/ore/terms/","schema":"http://schema.org/","timePeriodCovered":"https://dataverse.org/schema/citation/timePeriodCovered#"}}